Toner Cable 3.0 Meter Prime Focus Receive Only Antenna User Manual

3.0 Meter Prime Focus Receive Only Antenna

969 Horsham Road lHorsham, Pennsylvania 19044 USA l Phone: [phone] Fax: [phone] [e-mail]

Antenna Size - 3.0 Meter

Electrical Specifications C BAND KU-BAND

Operating Frequency (GHz) 3.625 – 4.2 10.95 – 12.75
Midband Gain, dBi (± .5dB) 40 dBi 49 dBi
3dB Beamwidth 1.7° 0.6°
Antenna Noise Temperature (20° Elevation) 30K 29K
Antenna Noise Temperature (30° Elevation) 28K 26K
Feed Interface CPR229F WR75
First Sidelobe (typical) -20 dB
Cross-Pol Isolation (Linear) >30 dB (on axis)
VSWR 1.3:1 Max.
Insertion Loss -30 dB

Mechanical Specifications

Reflector Material Eight Segment Glass Fiber

Reinforced Polyester SMC
Antenna Optics Prime Focus, Axisymmetric
Mast Pipe Size 6” SCH 80 Pipe (6.62” OD)
F/D Ratio / Feed Support .30 / Quad Feed Support
Elevation Adjustment Range 10° to 70° Continuous Fine Adjustment

(90° optional)

Azimuth Adjustment Range 360° Continuous / Polar mount

covers any 90° segment of arc

Declination Corrected Polar Range 90° arc coverage with 36” actuator

Environmental Specifications

Wind Load

Survival 125 mph (201 km/h)
Operational 45 mph (72 km/h)

Temperature

Operational -40° to 140°F (-40° to 60° C)
Survival -50° to 160°F (-46° to 71° C)

• 8 Piece Precision Compression
Molded Centerfed Reflector

• Low Transportation Cost with Eight
Panel Reflector

• Fixed Az/El or Polar Mount Options

P300FAE
P300PLR

Specifications Subject To Change Without Notice Rev 05-12 ©Toner Cable Equipment, Inc.