Tomraffield Morvah Wall Hanging Planter Installation Instructions

Morvah Wall Hanging Planter Installation Instructions

B

A

1. Identify if there are any hidden pipes or electrical cables in the wall to avoid causing damage or risk
of electrical sho

position and mark through the screw holes using a pencil. The wall must be capable of supporting

the estimated planted weight of the Morvah Planter (15kg). Determine the fixing method appropriate

to the wall structure and secure the wooden arm using suitable screws, concealing the screws with
the wooden plugs provided (A). Hang the planter ensuring the cord is sitting in the rebated groove and
pull the slipknot tight up to the stem to secure the planter in place (B).

- Caring for the earthenware bowl

We have designed a striking pair of earthenware bowls for our Green Range featuring a hard-wearing
glaze on the inside and a unique matte glaze on the outside, known as Engobe. We suggest you clean

both the interior and exterior surface of the pot by gently wiping away any marks using warm soapy

water and a lint free cloth. Once the pot is clean, gently dab dry using a soft, lint free cloth or towel.

Any bres on a cleaning cloth will stick to the outside surface more easily due to its beautiful nish.

- Caring for the wooden structure

Dust the Morvah planter with a soft, dry, lint free cloth. Mild furniture polishes can be used on the
wood. The wooden strap should be dried immediately after watering or misting the plants whilst in
place. This will help maintain the appearance of the wood by eliminating water stains. Simply wipe
dry with a lint free cloth after watering.

- Caring for your plants

Always refer to the care guides and planting guidelines supplied with any plant or seed you’ve chosen.
The Green Range earthenware pots do not have drainage holes in the base, therefore suitable drainage
must be added. The bowls should be placed inside a rolled towel to stop them moving whilst planting.

For more information on the installation and care of your product: contact@tomrafeld.com [phone]

ck during installation. Hold the steam bent arm up to the chosen wall in the correct