TUBULAR LID DISPENSERS/LID ORGANIZERS
LID DISPENSER MOUNTING INSTRUCTIONS:
Your new lid dispenser has been shipped to you partially unassembled
so that you can quickly mount the dispenser in the location of your
choice.
Using the enclosed screws and wingnuts, attach the longer bracket to
the tube using 2 of the 6 provided mounting holes.
Attach the bracket so that the narrowest width is at the bottom.
Attach the shorter bracket to the desired mounting surface with the
longer enclosed screws, also with the narrowest width at the bottom.
To add shelves, gently squeeze triangular shaped wire shelf dividers
into desired slots.
This dispenser is made of stainless steel and can be easily cleaned with
a non-toxic glass or general purpose cleaner.
a division of Tomlinson Industries
13700 Broadway Ave. Cleveland, OH 44125
www.tomlinsonind.com
©1997 Tomlinson Industries Form 1908659 Rev. 11/97
Loading...