Tomar Electronics MICROSTROBE Catalog Page
VISUAL SIGNALS
Lens Colors
Amber Blue Clear Green Purple Red
®
MICROSTROBE
• built-in RFI lters
Low Prole - Single Flash Strobe
• lens has hermetic o-ring seal
• solid state power supply
• 10,000 hour strobe lamp
• available in six lens colors
• UL listed
• NEMA 4X
Ordering Information
Please specify lens colors and model number when ordering. Available colors are Amber, Blue, Clear, Green, Purple, and Red.
Model No. Description Voltage/Frequency
470SSGP–120 AC strobe, wall plate mount 120VAC, 50/60Hz
480S–120 AC strobe, surface mount, AC cord set 120VAC, 50/60Hz
480SMB–120 AC strobe, magnetic mount 120VAC, 50/60Hz
485S-120 AC strobe, screw-in light bulb base 120VAC, 50/60Hz
485S-240 AC strobe, screw-in light bulb base 240VAC, 50/60Hz
490S–120 AC strobe, 1/2” female pipe mount 120VAC, 50/60Hz
490S–240 AC strobe, 1/2” female pipe mount 240VAC, 50/60Hz
492S–120 AC strobe, 3/4” IPS slip mount 120VAC, 50/60Hz
495S–120 AC strobe, 1/2” male thread mount 120VAC, 50/60Hz
495S–240 AC strobe, 1/2” male thread mount 240VAC, 50/60Hz
The MICROSTROBE® family is a low profile, single flash,
low cost strobe light which features a plug-in replaceable
lamp and Lexan® lens. The high efficiency, solid state,
power supply is fully potted in polyurethane for
the ultimate in protection from moisture, vibration and
exposure tohigh voltage. All units are polarity protected
and have built-in filters to protect against radio
interference and spike voltages.
14
MICROSTROBE
492S-120
3/4" IPS Slip Mount
490S-120
1/2" Pipe Mount
495S-120
1/2" Male Thread
485S
Screw-in Light
Bulb Base
480SMB-120
Magnetic Mount
480S-120
Surface Mount
470SSGP-120
Wall Plate Mount
BKT
Mounting Bracket
5"
3" dia.
G470
Heavy Duty Guard
5001 Xenon
Strobe Lamp
470S-L
Lens
480S-120-BASE
Power Supply
440 STAND
MAM-DS30
________
____
Specifications
Item Description
Flash Rate 60 to 80 flashes per minute
Light Output 50 effective candlepower (ECP)*
Voltage and Amperage 120VAC and 240VAC draw 0.07A average
Power Supply Output 2.7 Watts 1.9 joules per flash. 190,000 Peak Candlepower**
Size and Weight 5” tall x 3” dia. x 0.5 lbs ( 127mm x 76mm x 0.23kg )
Operating Temperature -40 C to 65 C
Encapsulation Fully potted in urethane material with no exposure to High Voltage possible
Available Options
NOTE: All “/“ options are factory installed only.
Model No. Description
G470 Heavy duty guard
LBO–MINI Lens blackout segment 180º
MICROSHIELD Vinyl, 180º lens blackout
/TRIAC–SW Solid state relay option
Mounting Options
Item Description
BKT Mounting bracket
440 STAND Plastic Stand (Thread mount MicroLert
MAM-DS30 Wall mount bracket
Replacement Parts
Model No. Description
5001 Xenon strobe lamp
470S–L Colored lens ( please specify color )
480S–120–PSA 120VAC power supply, surface mount
480SMB–120–PSA 120VAC power supply, magnetic mount
485S–120–PSA 120VAC power supply, screw-in light bulb base
485S–240–PSA 240VAC power supply, screw-in light bulb base
490S–120–PSA 120VAC power supply, 1/2” female pipe mount
490S–240–PSA 240VAC power supply, 1/2” female pipe mount
492S–120–PSA 120VAC power supply, 3/4” IPS slip mount
495S–120–PSA 120VAC power supply, 1/2” male thread mount
495S–240–PSA 240VAC power supply, 1/2” male thread mount
Architect and Engineer Specifications
The strobe light shall be Tomar model number series 470,
480, 485, 490,492, 495 or approved equal. The light source
shall be a plug-in field replaceable single-flash xenon
strobe tube. The strobe light must have built-in RFI filters
to protect against radio interference and spike voltages. It
shall be polarity protected, and have a power supply fully
potted in polyurethane. Voltage ranges shall be 12-80VDC
or 16-24VAC, 120 VAC, and 240VAC. The strobe light shall
be UL listed and of NEMA 4X type weatherproof design
with screw-on Lexan® lens.
*ECP (Effective Candlepower) is the intensity that would appear to
an observer if the light were burning steadily.
**Peak Candlepower is the maximum light intensity generated by a
flashing light during its light pulse.
models only)
15
Loading...