Tomar Strobecom II 4140, Strobecom II OSPOC Getting Started

Instruction

TOMAR Electronics, Inc.

2100 W. Obispo Ave.

Gilbert, AZ 85233 USA

800.338.3133 ph

800.688.6627 fax

www.tomar.com

Strobecom II 4140 and
OSPOC: Getting
Started

Information is provided on how to initially discover
the 4140 and OSPOC on a network and re-configure
it for custom network applications.

IS0592-02

1/13/2014

ATTENTION

THE STROBECOM II SYSTEM IS DESIGNED TO AID IN THE TRANSIT OF DESIGNATED VEHICLES THROUGH

THE TRAFFIC CONTROL SYSTEM, TO THEIR DESTINATIONS.

IT IS IMPERATIVE THAT THE DRIVERS OF EACH TYPE OF VEHICLE THAT USES THE STROBECOM II

SYSTEM BE MADE AWARE OF THE RESPONSE HE CAN EXPECT FROM THE TRAFFIC CONTROL SYSTEM.

IT IS THE RESPONSIBILITY OF THE CUSTOMER TO CONFIGURE THE SYSTEM’S RESPONSE TO EACH

VEHICLE TYPE AND TO EDUCATE EACH DRIVER TO EXPECT THE APPROPRIATE RESPONSE FROM THE

SYSTEM.

AT NO TIME SHOULD A DRIVER OF A VEHICLE EXPECT THAT HE IS GUARANTEED TO RECEIVE

PROTECTED RIGHT-OF-WAY THROUGH TRAFFIC INTERSECTIONS. DRIVERS OF VEHICLES THAT WILL

OPERATE OUTSIDE OF THE NORMAL TRAFFIC LAWS AND CONVENTIONS MUST ALWAYS TAKE

RESPONSIBILITY FOR ENSURING THE SAFE PASSAGE OF HIS VEHICLE THROUGH AN INTERSECTION
REGARDLESS OF THE OPERATION OR NON-OPERATION OF THE STROBECOM II SYSTEM.

TOMAR Electronics, Inc. makes every endeavor to ensure the accuracy of its documentation. However,
TOMAR Electronics, Inc. is not liable for any inaccuracies contained herein. TOMAR reserves the right to
make changes to its products without prior notice.

April 2013

Information in this manual is subject to change without notice and does not represent a commitment on
the part of Tomar Electronics, Inc.

Copyright © 2013 Tomar Electronics, Inc. All Rights Reserved

Getting Started Page 2