Page 1
%
PUTS YOU IN THE SPOTLIGHT
-AND ALSO “
A spark of inspiration or a stroke of luck may
put any product in the spotlight for a while.
But TOLEDO knows it takes real leadership.
based on constantly thinking ahead in research,
engineering, manufacturing and sales policies
...to keep a line of products at the top year
after year. This has been the TOLEDO way of
leadership in Pipe Tools for nearly half a cen
tury. It's not an easy way... leadership never is
It means never being completely satisfied
never letting up in our efforts to do a better jo
That’s why TOLEDO will continue delive;
better Pipe Tools today...and tomorr
ON THE SPOT”!
• •
t
wmmmmm
.■■mm
■ ■ i:-mm; r-mm
V'-
m
MB
Wi
mmm
:
iSS »
'j'J
Hr*,.
■■ &
LF-CONTAINED
SIMPACT
'/Mk
| /bace-detUftp e^iciettcy
m
■* . One set of high speed steel dies does
the work of four—
Threaded Threads 1" to 2" pipe. Sizes
changed instantly. Entirely self-contained.
s
\
K3
■B:
j
No loose parts. Designed for easier op
eration and long dependable service. In
ordering from your dealer, specify a
TOLEDO Simpact—the unbeatable self-
contained threading tool!...The Toledo
PipeThreading Machine Co.,Toledo,Ohio.
New York Office, No. 2 Rector St. Bldg.
with a TOLEDO Simpact
% 1 »!•
is-.
PRECISION PIPE TOOLS
Page 2
Simpact Ratchet Threading Device_$
No. 101 full-mounted for *4» 5/16,
y&, 7/16. y2, 9/16 and 54
ther NC or NF with box
No. 00 Ratchet threader y2” and
54
No. 00 Ratchet threader 54
” only
only
No. 00 Ratchet threader J4 ” to 54
only --------------------------------------------
No. 00 Ratchet threader Zs" to 54
Steel Carrying case for No.
threader _____________________
No. 11 Ratchet threader Zz
only
No. I I Ratchet threader y2" to I Vi "
only
No. II Ratchet threader
only
No. I I Ratchet threader 54
only
No. I I Ratchet threader 54
1 ]4
No. I I Ratchet threader Zs" to I"
No. I 1 Ratchet threader Zs" to
No. I I Ratchet threader % " to
Steel Carrying Case for No.
No. 12 Ratchet threader I" to 2f'
No. 12 Ratchet threader Z2" to 2""
No. 12 Ratchet threader J4 ” to 2"
No. 12 Ratchet threader Zs " to 2"
Zs ", J4 ” or 54
y2
" only
only
I /j,
" only
I
>4"
threader ____________________
only
with dies No. 00
" or 54
_____________________
______________________________
______________________________
______________________________
” to 54
” to I"
" to
______________________________
______________________________
-------------------------------
_______________________________
-----------------------------------
only
________________
_______________________________
” Adj. pipe die head
” Adj. pipe die head with
” to 1"
________________
dies No. 00 __________________
Z4", 5/16". 54”. 7/I6", y
2 " or
9/16" Adj. bolt die head with
dies No. 00 __________________
54”. 54". 54
head with dies No. 00
” or I
” Adj. bolt die
_______
No. 30 3-way threader 54”. Zl ”
and 54”-----------------------------------
No. 31 3-way threader y2"
, 54
I"
No. 101 full-mounted *4
54".
54
No. 1
No. 1
No. 101 complete with any five of
the following sizes
y*'\ 7/16", y2'\ 9/16" or
54
Small metal box No. 101 -----------------
No. 1
02 complete with any five of
the following sizes
9/16", 54”. 24”. 24" or i"
NC or NF with box
Metal box for No. 102----------------------
No. 0 threader Zs"
No. 0 threader *4
Simpact Ratchet Threader
No. I threader
No. IA Ratchet threader
No. IBR Ratchet threader
No. 40 Automatic Pipe Cutter
No. 80 Automatic Pipe Cutter
No. 250 Geared pipe cutter
No. 300 Geared pipe cutter
No. 350 Geared pipe cutter
No. 400 Geared pipe cutter
No. 2 Geared threader
rices F.O.B. Toledo, Ohio or Distributors
—
All p
—
ing
” prices of gen. price reg.
7/16". Z2”
” NC or NF with box
01 fuU-mounted for I size only
02 full-mounted for I size only
” NC or NF with box
to 54
” to 24
---------------------------------
” 5/16"
. 9/16" or
----14”
. 5/16"
_______
--------------------
”
” —
--------
------------
---------------
----------
------
------
------------
------------
------------
------------
--------------------
or max.
----------
” to
” and
_____
Zi ”
PRICE
Users Net Price Page
18.70
” ei
27.50
7.48
”
10.12
”
12.76
15.40
”
00
1"
I I
»
1.37
11.33
14.19
17.05
14.19
17.05
19.91
22.77
19.91
2.20
17.38
23.10
28.82
31.68
3.68
3.85
each 6
each 6
3.68
3.85
8.25
8.80
27.50
3.52
4.40
each 6
each 6
6
6
6
6
6
10.56
.88
12.95
1.76
13.75
12.00
18.70
12.10
14.30
16.50
75.00
150.00
80.00
105.00
130.00
150.00
60.50
’ stocks. Prices subject to change without notice. Prices do not exceed
price reg. No. 136 of O.P.A.
6
6
6
6
6
6
6
7
7
7
7
7
7
7
7
7
7
LIST
Users
Net Price Page
“
7
7
7
7
7
8
8
8
8
8
8
8
I
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
10
10
10
10
10
10
1 1
1 1
11
1 1
I
11
12
12
12
12
ceil-
------
” to
__
100.00
150.00
250.00
66.00
115.00
275.00
330.00
357.50
220.00
220.00
55.00
2.75
1.10
6.60
7.70
29.70
33.00
3.85
4.67
11.00
1.65
5.77
6.87
8.52
4.67
13.20
1.65
11.22
13.20
82.50
138.60
385.00
340.95
352.80
302.50
316.20
24.75
825.00
852.50
852.50
852.50
935.00
1,622.50
1,650.00
1 1 -45 PRINTED IN U.S.A.
No.
iy2
3-4
5
6
6
6
6
6
6
6
6
6
6
6
6
6
No. 3 Geared threader
No. 4 Geared threader
No. 2BR Geared threader
No. 25BR Geared threader ------------
Standard Power Drive AC 60 or 50
Standard Power Drive AC 2 5 cycle
Super Power Drive 3 phase 220-440
Universal Power Drive 230 volt —
Universal Power Drive I I 5 volt —
Special adjustable safety device __
Special attachment for No. I tool —
Thread cutting oil (plus federal
Junior Ratchet Reamer Zs" to 2"
Ratchet Reamer 54
No. I y2R Threader 8 thread
No. IJ/2R Threader I 1 y
No. 00 Vise J/g
No. 0 Vise /s" to iy2"
No. 3 Vise J/g” to 4|/2"
Clamp for No. 00 Vise
Handy Stand only
Handy Stand with tool
Handy Stand with tool tray and
No. 0 Vise Zs
Handy stand with tool tray, pipe
6
Geared threader
cycle _____________________________
volt ______________________________
sales tax) per gal. -----------------
" to I y2"
____________________
pipe bender ______________________
bender and No. 0 Vise |/g" to
” to
2)4"
----------------------
---------------------
” to 3"
2 thread
______________
tray
_____________
___________
-----------------
-------------
--------
---------------
-----------------
-----------------
________
iy2- -------------------------
6
6
6
6
Pipe Bender __________________________
No. 4 Work Bench _________________
No. 5 Work Bench _________________
No. 9 Work Bench
No. 18 Work Bench
No. 999 Super model with 6 Q. O.
die heads and 6 sets dies Z2"
to 2"
No. 999 Super model with 3 Q. O.
No. 999 Super model with 3 Q. O.
No. 999 Standard model with 6 non
No. 999 Standard model with 9 non
2" High Speed machine with 220-
2" High Speed machine with 230
2" High Speed machine with 220-
2" High Speed machine with D.C.
2" High Speed machine with collet,
quick-acting chuck and 220-
440 volt 3 phase 60 cycle mo-
_____________________________
die heads and 6 sets dies Z2" to
2"
die heads and 9 sets dies Zs
2" ________________________________
opening die heads and 6 sets
dies Zi
opening die heads and 9 sets
dies Z
Enclosed steel stand with parti
tioned die head box and 1 6"
steel tired wheels
440 volt 3 phase 60 cycle mo
tor _________________________________
volt I phase 60 cycle motor
440 volt 3 phase 25 cycle motor
230 volt motor
" to 2"
q
” to
tor Z2" to 2"
No. 1-2-4
volt, 3 phase, 60 cycle motor. 1,540.00
No. 1-2-4 machine with 220-440
volt, 3 phase, 25 cycle motor. 1,595.00
No. 1-2-4 machine with 230 volt,
1 phase, 60 cycle motor
No. 1-2-4 machine with D.C. 230
volt motor ______________________
ma
_________________
________________
---------------------------
2"
_________________
______________
_________________
-------------------------
chine with 220-440
--------
NO. 100-T.
Page 3
SIMPACT
is THE
SIMPLEST,
MOST COMPACT,
EASIEST CUTTING,
MOST RUGGED,
MOST ACCURATE,
EASIEST TO ADJUST,
MOST ATTRACTIVE.
AND EASIEST TO
CHANGE DIES
OF ANY 1" to 2"
SELF-CONTAINED
THREADERS.
1 to 2
SEEF-COXTAIr
SIMPACT
D RATCHET THREADER
I
This new “
and most remarkable self-contained i" to 2" pipe tool on the mar
ket. It has many exclusive features not found in any other self-
contained ratchet tools. Dies bear directly against the tapered
steps. It is simple in construction. Has few moving parts. Easily
cleaned. Easily disassembled. Has beautiful crackle finish.
SIMPACT is the easiest operating self-contained 1" to 2" thread-
er on the market.
change dies. Just push the size selector buttons, slip the dies in
the proper steps, turn the head slightly and the die size is changed.
SIMPACT has much larger wearing surfaces than any cam type
receder and less internal friction and less lost motion.
SIMPACT dies bear directly against tapered steps which assures
a uniform tapered thread at all times.
TOLEDO”
It is the easiest to adjust and the easiest to
SIMPACT ratchet threader is the finest
See Next Page
A ‘
TOLEDO”
change is quick and easy. Just
push the die selector buttons,
turn head slightly, slip dies in
proper steps. That’s all.
SIMPACT Die
Page 3
Page 4
1
I
t
The “
“
easiest operating 1" to 2"
self contained tool.
Torque-Test
TOLEDO
” proves a
” SIMPACT is the
A “TOLEDO” SIMPACT
is light in weight, but
strong. It balances nice
ly when set down.
“
A
TOLEDO
” SIMPACT has
automatic drip oiling. Oil pockets
in head collects oil and drips direct
ly on dies. No waste.
SIMPACT is the most compact. It will thread a
pipe projecting through a wall as short as 6^4
inches. It is the lightest. The net weight com
plete with 24" handle is only 20*4 pounds, yet no
lightweight, low-strength die castings are used.
SIMPACT has automatic drip oiling. Oiling
pockets in the head collect the oil and continually
drip directly over the dies during the cutting.
The dies are high speed steel. They can be ground
many times when dull.
SIMPACT has three clamping jaws and with
their long gripping surfaces and three wing nuts
and graduated guide posts, centering is easy and
accurate.
The “
TOLEDO
” SIMPACT meets all the require
ments of the most discriminating purchaser who
desires a tool to thread all sizes from 1" to 2" pipe with one set of dies.
Simplicity, compactness, ease of operation, quick and easy die change, light weight, durability and
long life and the ability to cut smooth, perfectly tapered threads. The “
TOLEDO
” SIMPACT
has everything.
I
“
TOLEDO
” SIMPACT Complete. I" to 2"
Ratchet Threader
Page 4
“
TOLEDO
are deep throated and easily
resharpened. No frail slotted
cam type dies.
” SIMPACT dies
A “
TOLEDO
most accurate, positive center
ing device of any 1" to 2 " self
” SIMPACT has the
contained tool.
See Page 2
For Price
A “
TOLEDO
fewer moving parts and will
out-wear and out-perform other
” SIMPACT has
self-contained tools.
Page 5
OH?
•VT
a
e
E TOLEDO PIPE THREADING
________
New York Office
if
■
—
’
TO
TRADC-MARK
>L,EX>0
^ggjplli
tjjf
.'!.v '
■
A©. 101 FULL MOUNTED
MACHINE CO., TOLEDO, OHIO
”
----------
902 No. 2 Rector Street Bldg.
ADJUSTABLE
_|
"TO^DO"
No. 1
No. 101 F. M. BOLT SETS
Are Easily Carried in the
Strong
bolt die has this advantage. Thus smoother, cleaner threads. Dies easily resharpened.
It’s the biggest bargain in bolt die sets today. Fine, high quality tools, at a price for no more
than ordinary bolt die stocks.
>£/
01 FULL-MOUNTED
Adjustable
BOLT DIE STOCKS
Red Metal Box.
BOLT DIE STOCKS
For the mechanic where time is an important
factor, this “
bolt die stock set is the ideal tool and at a
surprisingly low price.
Seven separate full-mounted die stocks, each
with a separate set of bolt dies—%-in., 5/16-
in., J^-in., 7/16-in., j4-in., 9/16-in. and ^4-in.
— either N. C. or N. F. — all packed in a
strong, red-metal box, as illustrated.
Not a moment is lost when this set of bolt die
stocks is on hand. Always ready for instant
use for any size of bolts within its range.
Easy, quick die adjustment for over, under, or
standard threads. Loosen four cover screws,
turn the knurled sizing ring to the proper size
and tighten the screws. All four die segments
cut equally even when moved off the hob
diameter or the standard setting. No other
TOLEDO”
No.
ioi
full-mounted
No. 101 F. M. Complete With 7 Full-Mounted Adjustable Bolt
Stocks and Dies
in. and %-in., all Packed in Partitioned Red-Metal Box,
User’s Net Price
Actual Size
Illustration of a
No. 101 Full-Mounted Die Stock
— %
-in.,
5
/16-in., %-in., 7/16-in., >/2-in., 9
________________
(Specify whether N. C. or N. F. Thread)
/16-
See Page 2
For Price
Thread Is Easily and Quickly Made.
*
Page 5
Page 6
“
No. 00, R.H. Threads Yl" to 24
TOLEDO
No. 00. R.H. Threads 24" to 24" Pipe
No. 00, R.H. Threads %" to 24" Pipe
No. 00, R.H. Threads *4" to 24" Pipe
No. 00, Steel Carrying Case
No. II, R.H., Threads Yl" to I" P«P
No. II, R.H., Threads Yl" to 1 *<4 ” Pipe
No. II. R.H., Threads Ya" to I" Pipe
No. II. R.H., Threads
No. II. R.H., Threads 24" to 124" Pipe
No. II, R.H., Threads Ye" to I" Pipe
No. II, R.H., Threads Ye" to 1V*" Pipe
No. II. R.H.. Threads 24" to I *4" Pipe
No. II. Steel Carrying Case
No. 12. R.H., Threads I" to 2" Pipe
No. 12. R.H., Threads Yl" to 2" Pipe
No. 12, R.H., Threads 24" to 2" Pipe
No. 12, R.H., Threads Ye" to 2" Pipe
Desirable, small, compact, ratchet threaders. Excellent for close cor-
jobs. Instant die change. Dies easily reground or replaced.
ncr
-.j—— _ 3j" left hand die heads and dies; 4i" die head
“
TOLEDO” No. 00 Adjustable
Pipe & Bolt Die Heads
Operate with regular No. 00 ratchet handle or
new 2 handle stock. Standard threads, or an
over or under adjustment of 4 to 5 turns on
pipe and 1/64" on bolts are obtained by loos
ening cover screws and turning the knurled
ring until the dies are set to the desired size.
The die segments may be easily removed
and reground when they become dull, or
replaced at small expense.
24"* 24" or 26" Adj. Pipe Die Head Comp.
R.H.
Yl" or Va" Adj. Pipe Die Head Comp. R.H.
24". 5/16", 24". 7/16", Yl" or 9/16"
Adj. Bolt Die Head with N. C. or N. F.,
R.H. Bolt Dies
54", 24". 24" or I" Adj. Bolt Die Head with
N.C. or N.F., R.H. Bolt Dies
” Small Ratchet Threaders
” Pipe
e
24" to I" Pipe
No. 00 can be furnished with
and dies for Boston Brass fine thread tubing,
and Vs" and %" Brass Pipe Dies.
No. I 1 can be furnished with special dies for
cutting straight threads on electric conduit.
A
Close-Up View pipe dies,
of No. 11-No.
12 Die Heads.
and Brass Pipe Dies.
No. 12 can be furnished
with special V6". Vi " and
dies. Brass pipe dies
same price as regular
See page 2
for prices
Vs" and
die head and pipe
See
page 2
for prices
1
MACHINE CO TOLEDO. OH'O
102 No. 2 Rector Street Bldg.
“
TOLEDO
” No. 101 and No. 102
Adjustable Bolt Die Stocks
Full-mounted, ready
for
instant
use. No dies
to change;
time. Adjustable for
deep or shallow as well
as standard threads.
Segmental dies are eas
ily resharpened or re
placed at low cost. No.
101 capacity 24" to 24"- No. 102 capacity 24" to I". Either
N.C. or N.F. thread. Any combination can be ordered.
No. 101—Full-mounted
7/16", Yl " « 9/16", 24" with metal case See page 2
No. 101—Full-mounted for one size only
No. 102—Full-mounted for one size only
Also furnished with I stock only and with dies and guides in any
combination desired. Either N.C. or N.F. thread as outlined below.
No. 101 complete with any 5 of the following
24"!
24 " • and box
Metal Box for No. 101
No. 1
02 complete with any 5 of the following
*Vl" \ 9/16", 24". 24". y6", 1 " With box
Metal Box for No. 102
No lost
’ 5/16", Vs", 7/16", i/2", 9/16",
No. 0 Complete 24" to 24" R-H.
No. 0 Complete, 24" to 24" R-H.
Only 24" long from tip to tip of handles. Adjustable for
oversize and undersize as well as standard threads. Uses re
ceding die principle for Yl anc
pounds.
# # # ® @
“
TOLEDO
“
TOLEDO
” SIMPACT
5/16".
24".
Soe page 2
Seo page 2
m
” No. 0 Adjustable Threader
26 ” to
?4
" Pipe Inclusive
(
Seo page 2
^ 24 sizes. Net weight but 824
1" to 2" Self-Contained
Ratchet
•SIMPACT, R.H., Complete
Threader
See page 2 for price
tr, ■*» •
for prices
for pricos
for pricos
N
b
“
TOLEDO
No. 30. R.H., Threads 24" to 24" Pipe
No. 31, R.H., Threads Yl" to I" Pipe
No. 30 weighs 4
removed and reground when dull or replaced at slight cost. No ad
justments, no loose parts, ample chip clearance. Can be furnished at
no extra cost with special dies for straight threads on electric con
duit, or with special brass pipe dies and brass plated covers.
% lbs. NET. No. 31 weighs 7 lbs. NET. Dies easily
” 3-
Way Pipe Threaders
[ Seo page 2
Page 6
Threads 1" to 2" pipe with
Automatic oiling—oil pockets
and oil continues to drip and
is being cut. Sizes changed with the finger tips in a fraction
of time usually required. Dies are backed by full-width taper
ed steps, assuring positive taper and long wear. No cams.
Dies are high speed steel and can be resharpened several
times. Handle is 24" long. Centering device is accurate and
simple in operation. Black crackle finish. The finest I" **
2" self-contained threader. Net weight is but 2 0 24 lbs.
one
set of dies. Operates easily,
are filled at start of thread
run on pipe and dies as thread
to
Page 7
. . THE TOLEDO PIPE THREADING
O
New York Office
c
“
TOLEDO
No. I, Plain, R.H., Complete,
No. I A. Ratchet. R.H., Complete
First of the so-called easy operating threaders. Adjustable for cut
ting over and undersize as well as standard threads. Strong, dur
able, will stand years of service. No. I
places. One of the easiest operating 2" threaders May be used
with 2 handles or ratchet. No. 1 weighs 19 lbs. No. IA weighs 22
lbs. Both tools can be furnished for left hand and for threading
electric conduit.
“
TOLEDO” ^
” 1" to 2" Adjustable Threaders
--------------------------
(
No. 1BR
1" to 2"
Ratchet
n
Threader
No. IBR, RH., Ratchet
* No. 1BR is similar to the No. I and IA tools, except for the
new type of pipe holder. No bushings are needed with this new
three jaw pipe holder. Large wingheud thumb screws with microm
eter line guide bars make these the easiest and quickest I" to 2"
tools to center on the pipe. The three broad-faced chuck jaws hold
the tools rigidly to the pipe, assuring clean cut. perfectly tapered
threads. Excellent for brass or copper as well as iron or steel pipe,
as the boadfaccd chuck jaws do not mar polished pipe. The large
winghead thumb screws are extremely easy to tighten Regular No.
I and IA dies, a separate set for each size of pipe, are used in the
No. IBR tools. Pipe holder will take a 2" coupling to permit the
cutting of short nipples. Net weight, 22 lbs.
ff
T
A is desirable for restricted
{ See page 2
’ .
See page 2
OL^IDO
“
TOLEDO” Geared Adjustable Threaders
No. 2, R.H., Threads 2J/^" to 4" Inch
No. l/i, R.H., Threads 4J/2" to 6
No. 3. R.H., Threads 4l/2" to 8
No. 4, R.H., Threads 9" to 12" Inch
Very easy operating large threaders. Standard with experienced op
erators for years. Operated either by ratchet handle or instantly
converted into power machines with a ’’TOLEDO
No. 2 weighs 84 lbs. net, uses a separate set of dies for each size
of pipe 2la" to 4".
No. 2 li weighs 155 lbs. net and uses a separate set of dies for each
size of pipe from 4
be furnished.
No. 3 weighs 215 lbs. net and uses a separate set of dies for each
size from 4 la" to 8". Special 4" dies and 4
nished.
No 4 weighs 329 lbs. net and uses a separate set of dies for
each size of pipe from 9
can be furnished.
Each tool is furnished with a complete set of dies, bushings, set
screw wrench and ratchet handle.
MACHINE CO T<
2
” Inch
” Inch
la" to 6". Special 4
” to 12'*. Special 8" dies and 8
” dies and 4
See page 2
for prices
i
” Power Drive.
” bushing can
” bushing can be fur
” bushing
Automatic
“
TOLEDO
No. 40 Automatic, Cuts 2" to 4" Inch,
No. 80 Automatic, Cuts 4J/^" to 8" Inch
No. 250 Geared, Cuts 2
No. 300 Geared, Cuts 4*/^" to 8" Incl.
No. 350 Geared, Cuts 7" to 10" Inch
No. 400 Geared, Cuts 9" to 12" Inch
’’TOLEDO
means of a scroll mechanism. Cut off pipe quickly with a straight
square end cut without burr, chamfering outer edge if desired. No.
40 weighs 70 lbs. net. No. 80 weighs 173 lbs. net.
"TOLEDO
curately, leaving a straight square end cut without burr. May be split
apart and clamped around pipe in a line to be cut off. Special 450
bevel cutter blades or grooving tools for Victaulic Couplings can be
furnished. No. 250 weighs 98 lbs. net. No. 300, 125 lbs. net. No.
350, 150 lbs. net. No. 400, 175 lbs. net. Operated with ratchet
handle or "TOLEDO" power drive.
” automatic pipe cutters. Positive automatic knife feed by
” geared pipe cutters. Hand feed and cut off pipe ac
” Pipe Cutters
/1" to 6" Inch
Geared
See page 2
for prices
“
TOLEDO” Geared Adj. Super-Threaders
No. 2BR. R.H., Threads 2JA" to 4
No. 25BR, R.H., Threads 2J
Pipe holders are fitted with broad faced chuck jaws and micrometer
line guide bars to center the tools on the pipe. No bushings are re
quired and the tools are extremely easy to accurately center, assur
ing clean-cut, perfectly tapered threads. Excellent for brass or cop
per, as well as iron or steel pipe, as the broad faced chuck jaws do
not mar polished pipe.
No. 2BR weighs 84 lbs. net. The pipe holder is fitted with three
broad faced chuck jaws and the tool uses a separate set of dies
for each size of pipe from 2^" to 4**.
No. 25
BR weighs 181 lbs. net. The pipe holder is fitted with four
broad faced chuck jaws and the tools uses one set of dies to thread
all sizes of pipe from 2 V=
extra set of dies is furnished with this tool.
Each tool is also furnished with a complete set of dies, set screw-
wrench and a ratchet handle.
" to 6”. Easy, positive die change and an
” Inch
Yl* to 6" Inch
See page 2
Page 7
Page 8
THE TOLEDO PIPE THREADING
New York Office-
••.V5T '
MACHINE CO., TOLEDO, OHIO
502 No. 2 Rector Street Bldg.
“
TOLEDO
uses a
DO
heavier than the standard drive, and
has a 2
” Standard Power Drive
11/2 H.P. A.C. motor. “
” Super Power Drive is larger and
Vi H.P. 3 Ph. A.C. motor.
%
TOLE
V:
J
/uM
■M
v A “
ing a “
TTcoHeafl®
TOLEDO
” Standard Power Drive operat
TOLEDO
pipe in less than four minutes.
” No. 3 tool threading 8"
*
The Special Yoke
\
\
and Handles for op
erating a “TOLE
i '
’ \
\*
DO
” No. 1 tool.
59
Power
Special Attachment for No. I Tool
Drives
Portable, electric power units to operate
threading and cutting tools, or other equip
ment using hand cranking methods. Drives
are similar in design.
“
TOLEDO” STANDARD POWER DRIVE, when operating
"TOLEDO” tools will thread 4" pipe in 2 minutes, 8" in
minutes; 4" pipe cut off in \/i minutes, 8" in 2J/2 minutes.
It has a 1 Zi H.P. A.C. motor. 2-speed transmission gearing con
trolled by gear shifting lever. Special toggle joint switch. Driving
head is furnished with two driving bushings to fit the two sizes of
pinions used on the various "TOLEDO” tools. A. slow speed it ro
tates at 38 R. P. M. and at high speed 57 R. P. M.
Length of Standard Power Drive overall is approximately 6 ft. Net
weight varies from 230 to 273 lbs. Shipping weight from 328 to 370
lbs. Iron wheels are 18" in diameter.
“
TOLEDO
but larger. Furnished with a 2]
either 220 or 440 volts. When operating a "TOLEDO" No. 3 tool
^/l' pip
utes.
onds and 8" pipe in 50 seconds. Driving head rotates at 57 R.P.M.,
at low speed and 97 R.P.M. at high speed. Super Drive weighs 378
lbs. net, shipping weight 396 lbs.
“
TOLEDO
motor operated from a lamp socket on any 115 volt current. Can
also be furnished with 230 volt universal motor. This drive, unlike
other models, has reversible motor, controlled b
switch. Is powerful enough to operate “
including 12", yet is not as fast or efficient as Standard or Super
Drives. Net weight 165 lbs. Shipping weight 242 lbs.
Also adapted for opening and closing large manually operated gate
valves. Driving head may be turned for either horizontal or vertical
stem valves. Reversible motor will either open or close the gate.
A special yoke and
the use of the "TOLEDO
as indicated in the illustration. This equipment enables
of a Power Drive at a very small cost to have efficient means to
thread 1" to 2" pipe by power.
Standard Power Drive with A. C. 60 or 50 Cycle Motor
Standard Power Drive with A. C. 25 Cycle Motor
Super Power Drive with A. C. 3-Ph. 220-440 Volt Motor
Universal Power Drive with 1 15 Volt Universal Motor
Universal Power Drive with 230 Volt Universal Motor
Special Adj. Safety Device (for sluice gate operation)
” SUPER POWER DRIVE—Similar to Standard Drive
e is threaded in 2 minutes, and 8" in less than 3 min-
When operating a No. 80 cutter 4" pipe is cut off in 45
” UNIVERSAL POWER DRIVE with J/2 H. P. universal
pair
of short handles may be furnished to permit
/i H. P. 3-phase A.C. motor only,
” No. I with a "TOLEDO" Power Drive,
TOLEDO
i\
sec-
a turn of the
” tools up to and
an owner
CM
01 .-
2. a
S £
s
sV
“
TOLEDO
using a 115 volt universal motor.
Can be plugged into any 115 volt
” Universal Power Drive
lamp socket.
NO. 101-T
10-44 PRINTED IN U.S.A.
Page 9
§KY. \ :
_______
__
mm
THE TOLEDO PIPE Yi~ij;
New York O. .;v.
-------'•
"JO
M.4CM jN£ CO.. TOLEDO. OHIO
r
T!J? w 9
* ▼▼▼
’
‘‘Toledo
TO
%
A very high grade superior thread-cutting
oil, selected by us as the result of 30
years
eggs.
It is economy to use good thread-cutting oil and we recom
mend “
especially good, either for hand tools or power machines.
It is sold only in sealed, red lithographed 1 gallon and 5 gal
lon trade marked cans.
Ratchet
A superior ratchet pipe
blades are cast solidly in the head. Ground with proper
clearance for each size of pipe assures easier cutting. When
dull can be readily resharpened.
lbs. A high grade quality reamer at a low price.
Junior Ratchet Reamer, Cap. 24" to 2"
Ratchet Pipe Reamer, Cap. 24" to 3"
TOLEDO
JUNIOR
RATCHET
'•'0 TO 2
Reamer,
and assures smoother, cleaner threads,
tighter joints and increased die service.
” black sulphur base cutting oil as being
See page 2 for price
“
TOLEDO
% " to 3"
.. .
” Black Sulphur Base
Thread Cutting Oil
’ experience.
”
—
reamer.
It
will not turn rancid
Pipe Reamers
Junior Ratchet Reamer "
to 2"
—
These new all steel reamers
are small, compact and very
easy to operate. The multi
ple tooth reamer head is
made from one piece of spe
cial heat treated steel. Has
accurately
Feeds easily with only a
slight pressure. Cuts rapid
ly. Leaves a smooth, clean
cut. An excellent 2" ream-
er especially adapted for
plumbers and electricians.
Net weight Junior Ratchet
4 5/
ground
8 lbs.
High Speed steel cutter
Net weight complete 7*4
See page 2
I
teeth.
“
TOLEDO
”
$
Open-Side Pipe Vises
Practical and convenient quality-built
pipe vises. Made in three sizes as list
ed below. No need of unlatching
tipping back a yoke for long lengths
of pipe. The operator simply slips the
pipe into the open side and tightens
down the jaws. Both upper and low
er jaws are full overlapping, and will
hold all pipe perfectly. Excellent for
fitting makeup work. The jaw con
struction permits working close to
the face of the vise. The jaws may be easily replaced when
dull.
The frame and all parts of these vises are extra heavy. The
handles are long and oversize permitting easy gripping of the
vise jaws.
Net weight No. 00 Vise, 6 lbs.; No. 0 Vise, 12 lbs.; No. 3
Vise, 27 lbs. Each vise is well greased and packed in an
individual carton, which assures delivery to customer in per
fect condition.
No. 00 Vise, Cap. J/g" to
No. 0 Vise, Cap. 24" to 2/i" Inch
No. 3 Vise, Cap. 24" to 424" Inch
Clamp for No. 00 Vise
1 124
“
TOLEDO
The “
TOLEDO" Han
dy Stand with No. 0
Open-Side Pipe Vise
Capacity 24" to 224"
is a desirable addition
to the “
line. High grade mal
leable iron. Legs held
in place by U bolts.
Quickly and easily as
sembled or taken
down. No legs or con
necting piece furnish
ed. Tool tray holds
die stock, pipe wrench, pipe cutter and oil can. Pipe bender
bends pipe or conduit up to I
” Handy Stand and Vise Mounts
TOLEDO
”
and
” Inch
" without kinking.
I
| for prices
See page 2
“
TOLEDO
No. 1 24^ 8 Thread Comp. 224" and 3"
No. I x
/zR II 24 Thread Comp. 2" to 3"
Ratchet operated and weighs but 37 pounds. Made for stan
dard 8 threads for 224 and 3 inch sizes. Special oil well tub
ing tool for I 1 threads sizes 2, 224 and 3 inch. When or
dering state whether 8 thread or 1 1 24 thread desired.
” No. iy2R Adj. Ratchet Threader
/
See page 2
f
Toledo Work Benches
No. 4 and No. 5 are
strong beyond need.
Legs adjust to uneven-
ess in floor. No. 9 and
chain vise of special de
Handy Stand Only, (no legs or connecting brace, vise,
tool tray or pipe bender)
Handy Stand with Tool Tray
Handy Stand with Tool Tray and Pipe Bender
No. 0 Open Side Vise, capacity
Handy Stand—complete with tool tray, pipe benderj
and No. 0 vise (no legs or connecting brace)
Pipe Bender
No. 4 Bench for vise to hold up to 2-inch pipe
No. 5 Bench for vise to hold up to 4 Vl> -inch pipe
No. 9 Bench and vise to hold 2 to 14-inch pipe
No. 18 Bench and vise to hold 2 to 18-inch pipe
to 2%" pipe i
No. 18 have adjustable
sign.
^
See page 2
for prices
’
1
Page 10
HINE CO TOLEDO, OHIO «?
302 No. 2 Rector Street Bldg.
999
This machine is made in two models
-----
the Standard using non-opening
cept
for style of die heads, and both cut, thread, and ream pipe up to and including 2".
The Super model threads bolts from % " to 1
onds, cuts off 2 pipe in 10 seconds, and smaller
threads 2" pipe in 30 seconds, the cutting off time the
CUTTING—Four cutter knives leave a straight
square-end cut without burr. Blades are fed thru a
scroll by a small hand wheel. May be resharpened
many times.
REAMING—Pipe is quickly reamed with a 12-tooth
cone type fluted reamer.
THREADING—
pipe permit hobbing the dies accurately and as
suring proper clearance
to 2" dies
opening die heads for Super model furnished for
each size, or one head for all dies up
ond head for I" or I 1
or 2". A separate non-opening die head for stand
ard Model machine furnished
die head change.
RACK AND PINION—
length gauge.
CONTROLS—No gear shifting levers. All controls
centralized in forward and reversing switch, con
veniently located. Protected by metal switch guard.
BUSHINGS—Furnished for each size pipe and only
necessary when cutting or threading pipe 6 ft. long
or longer.
PORTABILITY—May be carried by two
strong enough to withstand
Net weight 371 lbs. Shipping weight 450 lbs. When
Machine, Extra Parts
No. 999 Super, complete with 6 Q. O. Die Heads and Yl" to
2" R. H. Pipe Dies (6 Sets)
No. 999 Super, complete with 3 Q. O. Die Heads and Yl
2" R. H. Pipe Dies (6 Sets) ______________________________________
No. 999 Super, complete with 3 Q. O. Die Heads and Y&
2" R. H. Pipe Dies, (9 Sets)
No. 999 Standard, complete
and Yl
No. 999 Standard, complete
and
Enclosed Steel Stand with Partitioned Die Head Box and 16"
Steel Tired Wheels
Separate set of dies for each size
are
of
and perfect
high speed steel. Separate quick
A". and
a
for
Conveniently located. Thread
even severe service.
” to 2" R. H. Pipe Dies (6 Sets)
to 2" R. H.
Pipe
threads. All I"
to
% ", a
third head for 1
each size. Instant
_______________________________________________
with 6 Non-Opening
with 9 Non-Opening Die Heads
Dies (9 Sets)
Power
-----
the Super using quick-opening die heads and dies
ring type die heads.
mounted on steel stand with 16" wheels, so placed
that the machine balances easily, it may be read
ily moved about by one man. Machine
bench space of only 36" x 14"
MOTOR
motor which operates from any 115 volt lamp
socket. Reversible by a turn of the switch and is
ball bearing. Has excess reserve power far beyond
all needs. Can also be furnished with 230 volt uni
versal motor at same price.
CHUCK
sec
tor fingers will remove wrench if left in by mistake.
GEARS—All gears are fully guarded and
oil bath. An adjustable safety friction gear pro
tects the machine in the event of overload.
OIL PUMP
chips without clogging.
REGULAR EQUIPMENT—Each machine furnished
complete with cable wrenches and die heads and
dies, as specified below or with
die heads and dies. Price quoted on request.
ADDITIONAL EQUIPMENT — Electric conduit
dies, left hand pipe dies and bolt dies for Super
model only—can be furnished and quoted on
yet
men,
quest. Universal Drive Shaft to operate large gear
ed tools can be furnished at a net price of $20.00.
Super model threads 2" pipe in 22
sizes relatively fast. Standard model
same as Super.
—Regularly furnished with universal type
—Heavy 3
—Centrifugal type. Will pass dirt and
” to
” to
Die Heads
Pipe
Both machines
Ship. Wt.
-jaw
Maclaine
universal
450 lbs.
432 lbs.
433 lbs.\ See page 2
434 lbs.
for prices
440 lbs.
1 13 lbs.
are identical ex
sec-
occu
es a
and
is
geared type. Ejec
i pi
only 20" high.
run
in an
any combination of
re-
Carriage Feed Wheel
showing also Thread
Length Gauge.
Four
Cutter Knives all
cut simultaneously.
Smooth, swift cutting.
All steel hinged type Die
Heads, Quick acting, pos
itive, no slot wear.
Cone type Fluted Reamer
is fed by Carriage Feed
Wheel.
Page 10
Machine
with
on
Rubber - Tired
enclosed
stand
Wheels.
Page 11
MACHINE CO TOLEDO OHIO
2
“
TOLEDO
” 2
” HIGH SPEED
POWER PIPE MACHINE
A high speed, high production pipe machine to cut,
thread, and ream pipe up to 2" inclusive. Frame is all
steel. Bed is strong, rigid, and unusually
Threads pipe up to 2", bolts from Zq" to 1 Zl" • Net
weight 850 lbs. Floor space 36" x 27". Overall 31"
x 45". Total height 47".
deep.
Six spindle speeds are obtained with one clutch lever
and gear shifting lever, with speeds varying from 40
to 340 R.P.M, Cutting speed approximately three
times threading speed. Multiple disc clutch with brake
permits stopping spindle instantly or easing it over
to any position. Electrical reverse.
DIELS AND DIE HEADS—A separate quick-opening
hinge-type die head and a separate set of dies used
for each size pipe. Changed instantly, Zl" to 2"
dies highspeed steel, easily resharpened. Adjustable.
1" to 2" d>es are the rake type. Zl" P*P
6 seconds, 2" in 1 5 seconds. Thread length gauge.
CUTTING
off pipe smoothly and rapidly with square end cut.
Zl" cut off in 3 seconds, 2" in 6 seconds.
OIL PUMP
chips.
REAMING
quickly and fed by carriage feed wheel.
CHUCKS
type. Chuck wrench ejector fingers. Rear chuck fitted
with pipe tong supports.
GELARS
bath and fully guarded. Machine equipped with safety
friction gear, friction clutch, and thermal overload
circuit breaker.
MOTOR
the machine, away from floor dirt. Adjustable chain
drive.
EQUIPMENT
quick-opening die heads and a separate set of high
speed steel dies for each size pipe Zl" to 2" inch, set
of high speed steel cutter knives, reamer, wrenches,
adjustable pipe support, and 3 gal. of thread-cutting
oil.
THE SPEELDS
the "TOLEDO
chine in feet per minute when operated by a 60 cycle
1750 R.P.M. motor are given below: Motor chain
drive ratio is 19 to 3 7. Clutch shaft speed is 898.6
R.P.M.
Pipe
Size
Vl
1
M4
I 1/2
2
V*
Inches
1.050 11.04 16.70
1.315 13.82 20.90
1.660 17.47 26.45
2.375 25.60 37.80
Bold Face Type Shows Recommended
----
Four high speed steel cutter knives cut
----
Centrifugal type. Will pass dirt and
----
Cone type single blade reamer.
-Two
----
front and rear
----
Machine cut, accurately fitted, run in an oil
----
1 Z2 H.P. heavy duty. Hung
----
Regularly furnished with six separate
----
The threading and cutting speeds of
” 2" HIGH SPEED Power Pipe Ma
THREADING
LOW
O.D.
Pipe
.840
1.900 20.00 30.25
40.20
RPM
8.83 13.37
MED HIGH
60.82 100.36
RPM RPM
----
22.10
27.60
34.55
43.60
50.00
62.40
e threaded in
9" 3-jaw universal
on the rear
CUT OFF
MED
LOW
134.56
RPM
29.55 44.70 73.8
36.95 55.90 92.2
46.30 70.00 I I 5.5
58.40 88.40 146.
66.90 101.20 167.
88.60 126.50 209.
203.61
Speeds
RPM
Reams
of
HIGH
335-95
RPM
Ship. Wt. 1 g
Machine Complete, ELxtra Parts
2" H. S. complete with 220-440 Volt, 3
Phase 60 Cycle Motor
2" H. S. complete with 230 Volt, 1 Phase
60 Cycle Motor
4
2" H. S.
2" H. S. complete with D.C. 230 \ olt Mo
"TOLEDO
This is a high production power machine to cut thread and
ream
quick-acting collet chuck permits chucking the work without
stopping the spindle and thereby greatly increases the produc
tivity. Complete illustrated folder sent on request.
2" H. S. with collet, quick-acting chuck
com
Phase 25 Cycle Motor
tor _______.__________________________________
” 2" HIGH SPEED WITH COLLET CHUCK
pipe up to 2" and bolts up to 1 \
and 220-440 volt 3 phase 60 cycle
motor for threading Zl to 2 inch
__________________________
plete with 220-440 Volt, 3
_________________
--------------------------
pipe-1
Approx. \ .8
1100 lbs.
1 1 00 lbs.
1 100 lbs.
1 100 lbs.
/?". The lever actuated
100 lbs. page 2
Q.
J5
CN
01
o
KTt
price on
Page 11
DO
BETTER
Page 12
— ST
THE TOLEDO PIPE THREADING ”
New York Office-
'TOL
TciADC-KtfK
t:do
15
MACHINE CO.,
:-;V
TGUri-.v- .)r;sa
"TOLEDO
” No. 1-2-4
Power Pipe Maclaine
Similar to the 2" High Speed, but larger and
heavier. Capacity pipe /i
V%” to 2".
THREADING—A separate quick-opening die
head and separate set of dies is used for each
size pipe 2" pipe is threaded in 18 seconds, 3"
pipe in 30 seconds, and 4" pipe in 42 seconds,
and even faster speeds can be obtained. Thread
length gauge.
DIE HEADS—Hinged type and dies adjustable.
Die heads changed instantly from one size to
another. Dies are rake type, and H.S. steel,
easily reground.
CUTTING—Four cutter knives, cut simultan
eously. Scroll fed. Cut 2" pipe off in 3/j
onds, 4" pipe in 9 seconds. Smooth, square end
cuts.
Reaming—Cone type, single blade
CHUCKS—Two—front and
universal type. Wrench ejector fingers. Rear
chuck has special chuck jaws for holding
flanges and fittings, and pipe tong supports.
CONTROLS—Six spindle speeds are obtained
by one clutch lever and gear shifting lever.
Vary from 17.5 to I 44
GEARS—Machine cut and run in an oil bath.
Machine has safety friction gear. Multiple disc
clutch.
OIL PUMP—Centrifugal. Assures ample oil
flow.
MOTOR—3 H.P., heavy duty. Hung at rear of
machine, away from floor dirt. Chain drive, ad
justable and fully guarded. Protected by ther
mal overload circuit breaker.
GENERAL INFORMATION — Machine weighs
1750 lbs. net. Floor space 35" x 46" Overall
40" x 58".
EQUIPMENT—Regularly furnished with eight separate quick
opening die heads ,and a set of high speed steel dies for each
size pipe I to 4 inch, a set of high speed cutter knives,
reamer, wrenches, adjust, pipe support and 5 gal. of thread
cutting oil.
THE SP
2-4 Pipe Machine in feet per minute when operated by a 60
cycle 1750 R.P.M. motor are given below: Motor chain drive
ratio is I 7 to 52’—
Size
Pipe
I
I !4
1/2
2
2!/
3
3/2
4
No. 1-2-4 Complete with 2'20-440 Volt, 3
No. 1-2-4 Complete with 220-440 Volt, 3
No. 1-2-4 Complete with 230 Volt only,
No. 1-2-4 Complete with D. C. 230 Volt
EEDS The threading and cutting speeds of the No. I-
THREADING
Pipe
O.D.
Inches
1.315
1.660
1.900
2.375
2.875
2
3.500
4.000
4.500
Bold Face Type Shows Recommended Speeds
Machine Complete, Extra Parts
Ph. 60 Cycle Motor
Ph. 25 Cycle Motor
I Ph. 60 Cycle Motor
Motor ---------------------------------------
40.20
LOW
10.65
12.90
15.70 20.85 36.80
17.92 23.80 42.00
20.15 26.80 47.20
” to 4”, bolts from
reamer.
rear—14" 3
R.P.M.
Electrical
Clutch shaft speed is 574.2 R.P.M.
60.82 100.36
RPM
5.89
7.44
8.52
MED HIGH
RPM RPM
7.82
9.88
I 1.30
14.15 24.90 38.20 50.80 89.4
17.10 30.20 46.20 61.50 108.2
_____________
_______________
_____________
13.80 21.10 28.15 49.5
17.42 26.65 35.50 62.5
19.92 30.50 40.60 71.6
---
sec-
-jaw
reverse.
CUT OFF
134.56 203.61 335.95
LOW MED HIGH
RPM RPM RPM
56.30 75.00 131.9
64.30 85.60 150.8
72.30 96.30
Ship. Wt.
Approx.
2500 lbs.
2500 lbs.
s
I
o
o
cn
2500 lbs.
2500 lbs.
71
169.2
Four Cutter Knives fed by the Ratchet Handle cut off 4"
pipe in nine seconds and leave a straight, square end cut
without burr. Note the strong construction.
The 4" Die Head and Dies in position.
Note Thread Gauge in lower corner.
\
' • 2 '
TOLEDOS
■
Loading...