Tokyo Hy-Power HL-1.5KFX, HXT Series Instruction Manual

Model HXT-1.5KF Instruction Manual

External Cooling Fan Kit

This fan kit is designed to give an extra cooling effect for HL-1.5KFX HF linear
amplifier working under heavy duty conditions such as RTTY, SSTV, 24 hour
contests etc.

Specifications

Fans : Type SKUD48Z7 2pcs.
Dimensions : 105 x 50 x 245 mm (W x H x D)
or 4 x 2 x 9.5 inches
Weight : Approx. 0.7 kgs. or 1.6 lbs.
DC Power : 48 (50) V 0.25 A (0.5 A max., surge)
Fuse : 125V / 1A

(To be inserted into the holder at the chassis bottom.)

Installation

<Step1>
Remove the fuse holder out of the chassis.
(Fuse holder is located at the bottom of the chassis.)
Insert 125V / 1A fuse into the holder.
Plug the holder into the chassis.

<Step 2>
Remove two screw bolts located at the top of the cover.

<Step3>
Plug the plastic connector for the two wires from the fans into the “EXTERNAL
FAN POWER” socket located at the upper left corner of the rear panel.

<Step 4>
Put the fan housing on the top of the cover.
Screw the two bolts and tighten firmly.