Tokyo electric CS6100P Operation Manual

O

PERATION MANUAL

CS6100P

For customer Use:

Enter below the Serial No. which is located on

the rear panel of the camera control unit.

Retain this information for future reference,

Model No _CS6 100P

Serial No.__________

TOKYO ELECTRONIC INDUSTRY CO., LTD.

Thank you for purchasing the teli CS6100P television

color camera featuring compact and light weight.

To take best advantage and gain the most service from

your camera, read this operation manual carefully and

throu

ghly

.

WARNING:

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS

APPLIANCE TO RAIN OR MOISTURE.

This equipment should be used with DC 12 V only.

Do not use any other power source.

INFORMATION

This equipment generates and uses radio frequency energy

and if not installed and used properly, that is, in

strict accordance with the manufacturer's instructions,

may cause interference to radio and television reception.

If does so, which can be determined by turning the

equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following

measures:

Reorient the receiving antenna;

Relocate this equipment with respect to the

receiver;

Move this equipment away from the receiver;

Plug this equipment into a different outlet so that

this equipment and receiver are an different branch

circuits.

If necessary, the user should consult the dealer or an

experienced radio/television technician for additional

suggestions.

CONTENTS

Page

1, FEATURES 1

2, PRECAUTION 1

3, CONTROLS AND ADJUSTMENTS 3

3-1 Camera head 3

3-2 Camera control unit 4

4, CONNECTIONS 9

5, SUPPLEMENTAL INFORMATION 13

(1) Color temperature 13

(2) White balance 13

(3) How to get good color 13

(4) Color temperature of various 14

artificial lighting

(5) CCD image sensor 14

(6) Smear 15

(7) ASC and AGC 15

(8) Lenses 15

6, TROUBLE-SHOOTING GUIDE 16

7, SPECIFICATIONS 17

8, CONSTITUTION 19

9, APPERANCES 20

(1) Camera head 20

(2) Camera mounting kit 20

(3) Camera control unit 21

10, MAINTENANCE 22

1,

FEATURES

* Compact and light weight

* Available External sync-operation

* Provided 3 kind of video outputs of a PAL, Y/C and RGB.

* Equipped with both ASC (Automatic Sensitivity Control)

and AGC (Automatic Gain Control) which allows wide

dynamic range from bright to dark subjects.

* Equipped with an electronic shutter for fast moving

subjects for better definition picture.

2, PRECAUTION

(1) This equipment should be used with DC 12V only.

To prevent electric shocks and fire hazards, do not use

any other power source.

(2) The CS6100P is designed to be used with PAL color

television signals. It cannot be used for playback with

a television of a different standard.

(3) Please handle the equipments carefully.

(4) Do not point your camera lens directly into sunlight or

strong artificial light. This might cause irreparable

damage to the image sensor.

Also, be sure to use the lens cap when the camera is not

in use.

(5) Do not expose the camera unit to high temperatures. For

example, do not place it near a stove for long periods,

or in direct sunshine or in a car in hot weather.

Heat may cause some malfunction.

(6) Keep the camera clean. Dust can damage the camera and

cause trouble in moving parts.

Take particular care to avoid the entry of Sand or grit

when changing the camera lens.

(7) Avoid jolting the equipments or exposing it to vibration.

(8) Never attempt to dismantle the equipments.

(9) Avoid folding or stretching the camera cable or other

connection cable between equipments.

(10) When the cabinet is dusty, clean by gently wiping with

a soft cloth. And avoid the use of strong cleaning

agents such as benzine or alcohol as they may damage the

cabinet.

-1-

-2-

IMPORTANT

The camera control unit provides four screw holes

at the bottom chassis which are used to mount for

anything of a rack. Do not use longer screws inserted

over 3.5mm from the bottom chassis when the camera

control unit is installed to anything board.

Because there is a printed circuit board closed to

the bottom chassis, may cause damage it.

Bottom chassis provides

four screw holes of 2 6mm(ISO)

A part of camera control unit

printed wiring board

3, CONTROLS AND ADJUSTMENTS

Get to know the name and function of every part of your

camera. That way, you can take advantage of every

applications to take beautiful pictures.

The body and accessories shown below related to CS6100P.

3-1 Camera head

(1) Iris ring (Aperture ring) for use at manual operation.

To reduce aperture, rotate the iris ring toward CLOSE

(clockwise).

To increase aperture, rotate the iris ring toward OPEN

(counter clockwise). Adjust the lens aperture according

to the amount of light entering the lens so that correct

exposure is obtained.

(2) Focus ring

Take the focus with the ring to focus for the sharpest

picture.

* No lens is included in the provided accessories, make

choice of the most appropriate lens, according to your

system as necessary.

Camera head

mounting kit

-3-

Camera head cover

Camera cable

Lens for CS6100P

Camera head

(3)Camera cable

Provided camera cable is 3 meters in length. Join to the

optional extension camera cable (7 meters) as necessary.

3-2 Camera control unit (front panel)

SHUTTER

WHITE BALANCE

AGC POWER

CAMERA

(1)"POWER"

A power on/off switch. When power is turned on, the

pilot lamp on the power switch will light.

(2)"AGC"

AGC ON/OFF switch.

The AGC (Automatic Gain Control) switch is to increase

sensitivity electrically in low-light situations.

Set "AGC" switch to "ON" when illuminationis not

sufficient on the subject. Normally, put it "OFF"

position.

(3)"WHITE BALANCE"

The picture taken with a camera is sometimes adversely

influenced by the quality of the light illuminating the

subject. To obtain fine color images, it is necessary to

adjust color balance (white balance) in the camera's

video circuit depending on the quality, or color

temperature, available from such illuminating sources,

e,g. morning, midday, evening, and fluorescent lamp.

When making adjustment on "WHITE BALANCE", select any

one of "AUTO SET"/"AUTO"/"MANU".

-4-

* "AUTO" (Automatic follow-up system)

The purpose of this white balance of "AUTO" is for a TV

monitoring system, which installed to shoot a scenery

with wide angle. This automatic white balance adjust-

ment is performed by the detection of the average

picture levels of red(R), green(G), and blue(B) signals

picked up from the subject while they are balanced.

Under the proper condition, this incorporated function

is automatically compensated and follows up the white

balance for color temperature even when the camera is

panned during shooting, changed the color temperature of

a light source or changed ambient condition while "AUTO"

position.

However, this control system is not always perfect

, for

example, under a fluorescent light or when shooting and

closing up a subject with large colored area, this

control system cannot work properly and also cannot

obtain good color-imetry (color reproduction).

The purpose of the "AUTO" position is for TV monitoring

system for a scenery with a wide angle. If white balance

adjustment is not possible, use "AUTO SET" position.

* "AUTO SET" (Data holding)

Turning to "AUTO SET" after adjusted the white balance

for one or two seconds at "AUTO" position taking white

subject, e.g. white wall or white paper, the data of the

white balance will be held. And the white balance is

not change anything even if changed the illumination on

subject and the data will be held for about 5 hours

backing up the data.

Normally, set it "AUTO SET" position.

If you shoot more than 5 hours after the last white

adjustment, or when lighting conditions change,

re-perform white balance adjustment.

-5-