The TK711xx is a low dropout, linear regulator housed in
a standard TO-92 package, rated at 500 mW. An internal
PNP transistor is used to achieve a low dropout voltage of
100 mV (typ.) at 30 mA load current. The TK711xx has a
low quiescent current of 130 µA (typ.) at no load. The low
quiescent current and dropout voltage make this part ideal
for battery powered applications.
TK711xx
LOW DROPOUT REGULATOR
APPLICATIONS
■ Battery Powered Systems
■ Portable Consumer Equipment
■ Cordless Telephones
■ Personal Communications Equipment
■ Radio Control Systems
■ Toys
■ Low Voltage Systems
TK711xx
1
2
3
PIN 1. OUTPUT
2. GROUND
3. INPUT
ORDERING INFORMATION
TK711
Tape/Reel Code
VoltageCode
VOLTAGE CODE
20 = 2.0 V35 = 3.5 V
25 = 2.5 V40 = 4.0 V
30 = 3.0 V45 = 4.5 V
33 = 3.3 V50 = 5.0 V
TAPE/REEL CODE
NT: Tape Left
July 2000 TOKO, Inc.Page 1
V
IN
BLOCK DIAGRAM
PROTECTION
BANDGAP
REFERENCE
THERMAL
V
GND
OUT
TK711xx
ABSOLUTE MAXIMUM RATINGS
Input Voltage ............................................................ 15 V
Power Dissipation (Note 1) ................................ 500 mW
Operating Voltage Range............................... 1.4 to 14 V
Junction Temperature ........................................... 150 °C
TK71 120 ELECTRICAL CHARACTERISTICS
Test Conditions: VIN = 3 V, TA = 25 °C, unless otherwise specified.
LOBMYSRETEMARAPSNOITIDNOCTSETNIMPYTXAMSTINU
Storage Temperature Range ................... -55 to +150 °C
Operating Temperature Range ...................-20 to +75 °C
Lead Soldering Temperature (10 s) ...................... 235 °C