![](/html/36/3652/3652f5186db10e1afd129376cd8160840bdf0cbef2c229b03b07d7d281734dd0/bg1.png)
Following symbols represent danger and are for your safety. Illustration shows:
11-16 mm
Instruction Manual
3
7
The illustration of the lens shown in this manual is with Canon EF mount.
∞
1 2 m
11
4
3
f t
12
Warning
where there is a risk causing death or severe
injury to all those who use this equipment by
not conforming to these instructons.
Caution
where there is a risk causing injury or property
damage to all those who use this equipment
by not conforming to these instructons.
For Your Safety For safety of lens handling
Warning
Do not look at the sun through the lens or
through the lens mounted on a camera.
Retinal damage and/or blindness may occur.
Keep out of the reach of children. The lens is
heavy and could cause injury if it falls on a
small child. Also, the lens strap is also a
choking hazard. If the strap becomes wrapped
around the neck suffocation may occur.
Caution
Be sure to mount the lens securely to the
camera and confirm that the lens is locked
into place before use. If not the lens could
fall off the camera causing damage or injury.
Do not leave the lens in direct sunlight where
it may condense the light and start a fire.
Do not look at the sun or other intense light
sources through the lens or through the lens
mounted on a camera. Retinal damage
and/or blindness may occur.
Caution Caution
When the lens is mounted on your camera, please
・
be sure to set it properly and confirm it is firmly
locked in place. If not, the lens could fall off the
camera causing damage or injury.
The lens is a precision instrument. Handle with care
・
and do not drop, hit against a hard object, shake
violently or apply pressure. Otherwise, it may cause
the precision parts to malfunction.
Be sure not to apply too much weight on the lens
・
when mounted on your camera. The extra weight may
cause damage to both the camera and the lens mount.
When using a large or heavy lens, be sure to properly
・
support the lens and camera to avoid damaging the
mounts.
Be sure to inspect the lens and/or take test shots
・
with the lens in advance of any actual shooting.
This is recommended for when the lens is new and if
the lens has been in storage for a long time.
Do not remodel or convert the lens. This may cause
・
malfunction for both the camera and lens . Repair
for the altered lens may void manufacturer's
warranted service. Remove all dust, dirt, sand,
water, harmful gas and saline matter from the lens.
Be sure not to use organic solvents such as paint
thinner or benzin for cleaning.
Caution Prohibition Instructions
To prevent damage to your lens, injury to yourself and to others, read the following safety precautions in their entirely
before using this equipment. Keep this safety instruction available where all those who use the product will read them.
THE LENS IS NOT WATERPROOF! Do not submerge or spray
・
the lens with water. Water damaged lens will be impossible to
repair.
Wipe off water droplet by using a clean dry cloth. Use the
・
blower to remove dirt and sand. Clean thoroughly when used
near and around the ocean. Salt water is highly corrosive.
Any water that seeps into the lens could cause it to
・
malfunction.
Refrain from using the lens in high humidity or take extra
・
precautions in these types of climates. In order to keep the
damage minimal and to keep the repair cost down, follow these
precautions, when shooting in such climate. Keep the lens in a
bag or a case and remove only after moving to a place of more
mild temperature. If the lens is left at temeratures over +40C or
under -10C for an extended period of time the lens body could
become deformed or the lens may malfunction.
When the lens is attached or detached from your camera, turn
・
the lens to face up for better handling.
To prevent scratches on the front and rear elements, use the
・
lens caps at all time when the lens is not in use.
Avoid touching the front or rear elements with your hand to
・
prevent smudges and fingerprints.
Remove fingerprints and smudges by using a lens cleaner and
・
disposable lens tissues. Use gentle, circular motion from the
center of the lens toward the outer edge of the lens.
Description of Parts
Technical Data of Tokina 11-16 Cinema Lens
Lens structure
・
MTF GRAPH
・
f=11mm
100
(%)
Contrast
50
0.00 5 10 (mm)
Distance from Image Center
f=16mm
100
(%)
Contrast
50
0.00 5 10 (mm)
3
7
f t
∞
1 2 m
12
11
4
3
SD Glass FK01
SD Glass FK03
Aspherical Lens
S : Radiation direction
M : Concentric direction
Distance from Image Center
Manual Focusing Ring
❶
Focus Distance Scale (ft and m)
❷
Focus Distance Index
❸
Zoom Ring
❹
Focal Length Scale
❺
Zoom/Diaphragm Index
❻
Diaphragm Scale
❼
Diaphragm Ring
❽
EF or Micro Four Thirds Mount
❾
Insert Holes for Zoom Pins (6 holes)
❿
How to Attach/Detach the lens
Attach/Detach the lens to/from your camera
according to the instruction in the Manual provided
with your camera.
*When attaching/detaching the lens, be careful not to drop
the lens to avoid impact damage.
How to attach the lens hood
To securely install the hood, align the
hood with the hood attachment index dot (●) on the
IN
mark on the
●
lens, and then turn the hood clockwise, as viewed
How to use Zoom Pins
Screw on the supplied blue zoom pin into any hole (6
in zoom ring), and you can operate focusing and
zooming easily.
∞
1 2 m
11
12
T
4
3
from the front, until a click is heard. Then, confirm the
position of the mark on the hood aligns with the
position of the hood position indicator on the lens.
Performance Table
・
Mount
Focal Distance
Zoom Ratio
Optical Structure
Sensor Size
Minimum Focus Distance
Maximum Macro Magnification
Zoom Mode
Number of Aperture Diaphragms
Depth of Field
Filter Size
Overall Length
(from mount surface)
Diameter of Front Head
Maximum Diameter
Weight
Canon EF
11 groups/13 elements
T3 – T22 (F2.8 – F22)
97.9mm
91.7mm
(
84mm
84mm
0.69kg
Micro
Four Thirds
11-16mm
1.455
Super 35mm
0.35m (1.15ft)
1 : 11.6
Rotary Zoom
9
77mm
120.7mm
116.5mm
(
)
84mm
84mm
0.78kg
IN
Hood attachment index (on the lens)
Before attaching the hood
Focusing
)
mark
●
IN
Hood right position indicator
(on the hood)
After the hood is securely fixed
This is a manual focus lens only. Focus by turning
the focus ring until the image is in focus or set the
desired focus distance on the distance scale.
Use care when screwing on the zoom pin.
The pin must be aligned straight with the
corresponding holes. If not, the threaded hole
could get stripped or damaged.
Exposure Modes
For the exposure mode settings, follow the instructions
in the manual provided with your camera.
*Specifications of the lens mount cannot be modified.
*The external appearance, specifications shown in this
catalog and accessories may be changed without any
advance notice.
![](/html/36/3652/3652f5186db10e1afd129376cd8160840bdf0cbef2c229b03b07d7d281734dd0/bg2.png)
■修理に関するお問い合わせ
11-16
シネマ
使用説明書
ATX
特機営業部小田原営業所
TEL.
0465-38-1371
■発売元
レンズ修理相談窓口
受付時間:月〜金 9:30〜17:45
(土、日、祝日、年末年始定休)
3
7
∞
1 2 m
f t
株式会社ケンコープロフェショナルイメージング
〒161-0031東京都新宿区西落合 3-8-19いすゞビル 1FTEL.03-5988-7358
特機営業部小田原営業所
〒250-0852神奈川県小田原市柏山 2795-1TEL.0465-38-1371
12
11
4
3
■製造元
〒161-8570東京都新宿区西落合 3-9-19
本使用説明書に使用されているイラストはキヤノンEFマウント仕様です。
※本説明書では、危険をその内容、程度に応じ、次の 2 種類に分けています。 ※本説明書では、次のような絵表示を使用しています。
この指示に従わないで誤った取扱い
をすると人が死亡または重傷を負う
可能性があります。
警告 注意
■レンズ安全上のご注意
安全のため、ご使用前には必ずこの「■レンズ安全
上のご注意」をよくお読みになり、それぞれの注意事
項をお守りください。
警告
レンズで直接太陽をのぞかないでください。
失明の原因となります。
レンズは幼児の手の届くところには置かない
でください。落ちたり倒れたりしてケガをする
おそれがあります。また、ストラップが首に巻
き付くと、窒息するおそれがあります。
注意
レンズをカメラに装着する時は、レンズをカメラ
に正しくセットし、きちんとロックされ たことを確
認してください。
正しく装着されていない場合、はずれて落下し、
ケガをするおそれがあります。
日光が直接当たるところにレンズを置かないで
ください。レンズによって近くの物に集光し、火
災が発生するおそれがあります。
レンズを付けたカメラで、太陽や強い光源を直接
見ないでください。視力障害の原因となります。
この指示に従わないで誤った取扱いをする
と人が障害を負う可能性があります。また、
物的損害が発生する可能性があります。
■レンズ取り扱い上のご注意
注意
・レンズをカメラに装着する時は、レンズをカメラに正
しくセットし、確実にロックされたことを確認してくだ
さい。正しく装着されていない場合、レンズがはずれ
なくなったり、はずれて落下するおそれがあります。
・レンズは精密機械です。扱いには十分ご注意ください。
レンズに強い振動や衝撃、あるいは圧力を加えると、精
密に調整された部分に故障が発生します。落としたり、
ぶつけないように注意してください。
・カメラに装着したレンズに無理な過重をかけないで
ください。レンズおよびカメラ側のマウント部分が損
傷するおそれがあります。
・大型のレンズはマウント部分に負荷がかかりやすい
ので、操作時や移動時には必ずカメラとレンズを一緒
に持 つようにしてください。
・長期間使用しないときや、大切な映像を撮る時には、
必ず事前にレンズをチェックしたり試し撮りをするな
どして、失敗 を防ぐようにしてください。
・レンズを改造、変造しないでください。レンズやカメラ
の故障の原因になります。改造、変造したレンズはサー
ビスセンターでの修理が受けられない場合がありま
す。
・ ゴ ミ や 泥 、砂 、ホ コ リ 、水 、有 害 ガ ス 、塩 分 な ど が レ ン ズ
内に入ると、故障の原因になります。ご注意ください。
※シンナーやベンジンなどの有機溶剤は絶対に使用
しないでください。
は注意が必要な内容があるこ
と示しています。図の中に書か
れているのは注意の内容です。
物的破損を発生させないため、ご使用前には必ずこの「■レンズ取り扱い上のご注意」を
よくお読みになり、それぞれの注意事項をお守りください。
注意 注意
・このレンズは防水機構になっておりません。水没させないよ
うにご注意ください。水没品は、ほとんど修理不能になりま
すので、取り扱いには十分ご注意ください。
・レンズ本体やレンズ面に水滴や泥、砂などがついている時
は水滴をぬぐい、砂などをブロアーなどできれいに落として
から静かにレンズをカメラからはずし、さらに、マウント側
の水滴をぬぐい、泥、砂などもブロアーなどできれいに落と
してください。とくに海辺などで使用した後は、塩分が残ら
ないように十分拭いてください。
・水滴などがついたまま放置しますと、毛細管現象により水
がレンズ内部に浸み込んでいき、故障の原因になりますの
でご注意ください。
・寒暖の差のはげしい所で使用しますと、温度差によって結
露が生じ故障の原因となり、修理不可能になるか修理費
用が多くかかることになりますのでご注意ください。バッ
グなどに入れてできるだけ温度変化を緩やかにして、温度
差がなくなってから取り出 すようにしてください。
・レンズを40℃以上の高温下、あるいは-10℃以下の低温下
の場所に長く置くと、ボディが変形したり、正常に作動しな
い場合がありますのでご注意ください。
・レンズを外したときは、レンズ面を傷つけないように、取り
付け面を上にして置いてください。
・レンズを使用しない時は、必ず前と後のキャップを付けてく
ださい。レンズ面に傷がついたり、連動ピンが曲がったりし
て、作動不良をおこす原因となります。
・レンズ面には直接指で触れないでください。レンズ面につ
いた汚れは、市販のレンズクリーナーをご使用ください。
その際は、レンズ面の中心から外側に渦巻き状に拭いてく
ださい。
は禁止を示しています。
図の中に書かれているの
は禁止の内容です。
は 指 示 を 示
しています。
・当社以外で分解・改造されたもの、あるいは保存
上の不備または誤った使用による故障、落下衝
撃による故障、浸水、冠水、砂入り品などは保証
期間中であっても修理は有料となります。また、
損傷が著しく製品の性能復元ができかねる場
合、修理不能となることがありますのでご了承く
ださい。
・万一故障などした場合は、レンズをご自分で修
理しないで、「レンズ修理相談窓口」へご依頼くだ
さい。なお、故障の状態によっては、その際のメ
ディアやフィルムなどを添付して頂くと、修理作
業の参考になります。
・保証期間経過後の修理は、原則として有料となり
ます。また、運賃諸掛りはお害様にご負担願いま
す。
・お取り扱い上の不注意(使用説明書以外の誤操
作、落下、衝撃、水かかり、砂・泥の付着、レンズ内
部への水・砂・泥の入り込みなど)、お手入れの不
備(力ビ発生など)により発生した故障は有料修
理または修理不能になる場合があります。
・本製品の故障に起因する付随的障害(撮影に要
した諸費用および撮影により得られる利益の損
失など)については、補償いたしかねます。
・本製品は撮影のための製品であり、それ以外の
使用目的で使用された時の故障および付随的障
害については、ご容赦ください。
■各部の名称
3
1 2 m
7
∞
11
4
3
■Tokina11-16シネマATX レンズデータ
●レンズ構成図
●MTF グラフ
f=11mm
100
(%)
コントラスト
50
0.00 5 10 (mm)
画像中心からの距離
f=16mm
100
(%)
コントラスト
50
0.00 5 10 (mm)
f t
12
●は SD ガラス FK01
●は SD ガラス FK03
●は非球面レンズ
画像中心からの距離
S:放射方向
M:同心方向
マ ニュアルフォーカ スリング
❶
距離目盛(ftおよびm)
❷
距離目盛指標
❸
ズームリング
❹
ズーム目盛
❺
ズーム /絞り指標
❻
絞り目盛
❼
絞りリング
❽
キヤノンEFマウントまたは
❾
マイクロフォーサ ーズ マウント
ズームピン取り付け穴(6カ所)
❿
●仕様
マウント
焦点距離
ズーム比
レンズ構成
対応センサーサイズ
最短撮影距離
最大マクロ倍率
ズーム方式
絞り羽根数
アイリス
フィルター径
全長
(マウント表面から)
前頭部直径
最大径
重量
キヤノンEFマイクロ
スーパー35mm
0.35m(1.15フィート)
T3‒T22(F2.8‒F22)
97.9mm
(91.7mm)
φ84mm
φ84mm
0.69kg
フォー サ ーズ
11-16mm
1.455倍
11群13枚
1:11.6
回転式
9枚
77mm
120.7mm
(116.5mm)
φ84mm
φ84mm
0.78kg
■レンズの着脱方法
レンズの着脱は、カメラのメーカーの使用説明書にし
たがって着脱してください。
※着脱の際にはレンズをぶつけたりしないようにご注意ください。
■レンズフードの取り付け方法
IN
フードの
マークを、レンズのフード取り付け指標
●
(●)に合わせ、矢印の方向にクリックが確実に入る
まで 回転させて取り付 けます。
IN
マーク
●
IN
フード取り付け指標(レンズ側)
フード 取り付け時 フード 取り付け後
■露出モード
フード正位置確認指標
(フード側)
■ピント合わせ
ピント合わせはマニュアルフォーカスのみです。
■ズームピン取り付け
付属の青いズームピンを、ズームリングにあるズー
ムピン取り付け穴(6カ所)のいずれかに装着するこ
とで、ズー ム操作がスムーズになります。
∞
1 2 m
11
12
T
4
3
※ズームピンはレンズに対して垂直にまっすぐにネジ
込んでください。曲がった状態で無理にねじ込むと、
ネジ山が潰れ、レンズから外せなくなる恐れがあり
ます。
※ズームピンを装着した状態でレンズを持ち運ばな
いでください。ピンが破損する恐れがあります。
■露出モード
露出モードのセットは、ご使用のカメラの使用説明
書にしたがってください。
※レンズのマウント仕様変更はできません。
※この使用説明書に記載された外観・スペックおよび付
属品は、予告なく変更することがあります。