
User manual Senso® Balance Bar
Congratulations!
You are now the owner of a Senso® Balance Bar, a product “made in Germany”.
This sports tool was produced in compliance with valid EU norms. It is free of forbidden
phthalates and heavy metals.
This tool is completing the Senso® Balance product family. A new feature is the improved contact
with the ground. The air-filled Balance Bar. Ideal for building up your balance. With senso knobbles
to improve perception. Available in 3 different colors. The air filling and the special Senso® knobbs
ensure an ideal stimulation of the proprioceptive senses and are especially suitable for all stepping
and walking exercises.
Ideal for perceptional training of children as well as adults.
Warning
Avoid storage in direct sunlight or near heat sources, because otherwise the Senso®
Balance Bar might deform
Avoid contact with sharp and pointed objects (e.g. broken glass, pointed rocks in shoe
soles) because they can damage the Senso® Balance Bar. Do not throw the Senso®
Balance Bar!
Use sport shoes, regular shoes or be barefoot while training on the Senso® Balance Bar
Prior to any use, the Senso® Balance Bar should be checked for damage because
otherwise a safe handling is not guaranteed
The Senso® Balance Bar has to rest on a horizontal, stable and dry ground, to make sure,
that the Senso® Balance Bar cannot slide away during the exercises.
Equipment details:
The Senso® Balance Bar is made of high-grade Ruton® with a needle valve.
Size: ca. 50 x 7,5 cm
Load: 200 kg
Care:
Use mild standard detergents and disinfectants. Dissolvers as well as acidic or corrosive cleansers
can harm the material. The Senso® Balance Bar is waterproof
How to inflate:
The air filling of the Senso® Balance Bar can be regulated by using a standard needle pump (e.g.
ball pump)
Therefore the Senso® Balance Bar is equipped with a needle valve.
Please perform changes to the air pressure inside the Senso® Balance Bar (inflation or bleeding)
only, when the Senso® Balance bar has room temperature. Always moisten the needle before
carefully inserting it into the valve.
More Information on www.togu.de - Service phone +49(0)8051 9038-0