QUICK START GUIDE
1.
1. 2.
DOWN
UP
RIGHTLEFT
Preparations for
the maiden flight
1. Plug in the charging cable and turn on
the SmartPlane using the switch on
the underside.
2. Activate Bluetooth in the smartphone
settings and download the
SmartPlane app from the App Store
and Google Play Store.
3. Open the app. The app automatically
prepares the SmartPlane for its first
flight, and then connects to the plane.
This process takes up to 12 minutes.
The SmartPlane is ready for take-off!
Establish connection:
1. Turn on the SmartPlane using the
switch at the bottom.
2. Open the SmartPlane app.
3. Hold the smartphone 5 cm away from
the aeroplane. As soon as the app
switches to cockpit mode, the
SmartPlane is ready for take-off!
Pre and post-flight procedure
When you’re done:
4. Close the app and turn off the SmartPlane
after you are done flying.
1. Using two simple hand movements, the app
enables comfortable and easy control of the
SmartPlane. For this, only one hand is necessary.
Speed/altitude: The sliding throttle in the app,
located on the bottom half of the screen, is
controlled with one thumb. By sliding the
throttle up, the airplane gains speed, and with a
downward movement, flying speed is reduced.
The altitude of the SmartPlane is regulated by
the speed.
Turning flight: By tilting the smartphone to the
left or right, turning flight of the SmartPlane is
initiated.
2. For a controlled start, the SmartPlane should be held
firmly in one hand, with the smartphone in the other.
The pilot gives approximately 50% thrust and throws
the aeroplane gently forwards, in order to then,
through light course correction, assume stable flight.
TobyRich GmbH declares that this product:
complies with the essential requirements of §3 FTEG and the other
relevant provisions of the FTEG (Article 3 of the R&TTE Directive). The
Declaration of conformity and further information can be found at:
www.tobyrich.com
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC ID: 2ABDG-SPBL
The SmartPlane features a LiPo battery. The battery is located inside the nose of the
aircraft in the front. Please observe the following safety precautions:
- Do not remove the battery and do not make any changes to it.
- Do not use or store the SmartPlane near a heat source such as fire or room heaters.
- Avoid throwing or hitting the SmartPlane on a hard surface.
- To charge the battery, use only the supplied USB charging cable. Connect it only to a
standard USB charging port e.g. one present on your home computer.
- IMPORTANT: Charge the battery at least once every 6 months.
2.
3.
Controlling the SmartPlane
Disposal of depleted batteries
The user is legally obliged to return depleted batteries.
Disposal of depleted batteries in the household garbage is prohibited!
You can return depleted batteries free of charge to designated collection points of your
garbage disposal company, or to shops selling such batteries.
Disposal of electrical and electronic equipment and components
In the interest of our environment and to recycle the used raw materials as completely
as possible, the consumer is asked to bring used and defective equipment to the
designated public collection centers for electrical and electronic equipment.
Not suitable for children under 14 years.
Please read the instruction manual before usage.
This product can be used within all EU-countries.
phone: +49 (0)421 218 64044 | email: info@tobyrich.com
TobyRich GmbH | Am Fallturm 1 | 28359 Bremen | Germany