tobeone REDON RX9300 Series, REDON RX9000 Series, REDON RX9300S, REDON RX9300SR User Manual

USER’S MANUAL

TREADMILL
RX9300/RX9000 Series

- 1 -

TABLE OF CONTENTS

1. Getting Started

2. Installation

2.1 Precautions

2.2 Name of each part

2.3 How to install

2.4 Grounding Instructions

2.5 Centering the Belt

3. Using the treadmill

3.1 Display Console

3.2 Using Workouts

4. Service and Technical Data

5. Specifications

6. Parts List

- 2 -

1. GETTING STARTED

[[IIMMPPOORRTTAANNTT SSAAFFEETTYY IINNSSTTRRUUCCTTIIOONNSS]]
RReeaadd aallll iinnssttrruuccttiioonn bbeeffoorree uussiinngg tthhee ttrreeaaddmmiilll

l

DANGER

To reduce the risk of electrical shock. Always unplug this REDON
before cleaning or attempting any maintenance activity.

WARNING

To reduce the risk of burns, fire, electric shock or injury, it is imperative to connect
each product to a properly grounded electrical outlet.
To disconnect, turn power OFF at the ON/OFF switch, then remove plug from
electrical outlet.
Never operate a REDON if it has damaged power cord or electrical plug, or if is has
been dropped, damaged, or even partially immersed in water. Contact TOBEONE
CO., LTD Customer Support Services.
Position this product so the power cord plug is accessible to the user.
Keep the power cord away from heated surfaces. Do not pull the equipment by the
power cord or use the cord as a handle. Do not run the power cord on the floor under
or along the side of the treadmill.
If the elec trical supply cord is damaged it must be replaced by the manufacturer, an
authorized service agent, or a similarly qualified person to avoid a hazard.
Do not use this product in areas where aerosol spray products are being used or
where oxygen is being administered. Such substances create the danger of
combustion and explosion.
Always follow the console instructions for proper operation.
Close supervision is necessary when used by, on, or near children, invalids or
disabled persons.
Do not use this product outdoors, near swimming pools or in areas of high humidity.
Never operate a REDON with the air openings blocked. Keep air openings free of
lint, hair or any obstructing material.
Never insert objects into any opening in this product. If an object should drop inside,
turn off the power, unplug the power cord from the outlet and carefully retrieve it. If
the item cannot be reached, contact TOBEONE CO., LTD Customer Support
Services.
Never place liquids of any type directly on the unit, except in an accessory tray or

- 3 -

holder. Containers with lids are recommended.
Wear shoes with rubber or high-traction soles. Do not use shoes with heels. Leather
soles. Cleats or spikes. Make sure no stones are embedded in the soles.
Keep all loose clothing, shoelaces and towels away from moving parts.
Do not use this product in bare feet.
Do not reach into or underneath the unit, or tip it on its side during operation.
Keep the area 2 meters by 1meter behind the treadmill clear of any obstructions,
including walls, furniture, and other equipment.
Handrails may be held to enhance stability as needed, but are not for continuous
use.
Never mount or dismount the treadmill while the running belt is moving. Use the
handrails whenever additional stability is required. In case of an emergency, such as
tripping, the handrails should be grabed and the user should place his/her feet on the
side platforms.
Never walk or jog backwards on the treadmill.
Use this appliance only for its intended use as described in this manual. Do not use
attachments not recommended by the manufacturer.

- 4 -

2. INSTALLATION

Belt Adjusting

2.1 Precautions

The treadmill should be installed on a flat place with even leveling. If the treadmill is
placed on an unstable pad or carpet, the belt may not be correctly arranged, and will be
a cause to be overloaded. In such a case, be sure to use the machine after you place
the machine on a firm and flat object such as plywood.
Make sure that enough space is secured in front of the treadmill so that you may find it
easy to operate the power switch.
Please be sure to use a standardized plug which should be grounded.

2.2 Name of each part

Console Display

Touch Heart Rate Sensor

Motor Cover

Front Handrail

Handrail

Emergency Key

Support

Running Belt

Foot Rail

Base

Foot

- 5 -

Screw

2.3 How to install

Please set a suitable place to install REDON according to the following requirements :
(1) A place where the base is flat.
(if the base is not even condition, it may cause vibrations).
(2) Please place the power cord at a secluded place.
(3) Open the motor cover, insert the support and lock with M12 screw.
Please throw the cable to support as follow pictures.

(4) Assemble the handrail with support. Pull out the main cable from right support

throughout the handrail.

(4) Assemble front handrail including Emergency Key and Touch Heart Rate Sensor.
Pull out cables from left Support throughout the left Handrail.
(5) Assemble console back panel by fixing Console Support to Handrail. Cover and
assemble console front panel .
Cation : Before cover console front panel connect Emergency Key cable and Touch
Heart Rate Sensor cable from handrail to console board
(6) Turn the power On and check treadmill operation

- 6 -