Toastmaster 2246CAN User Manual

Under-Cabinet

Can Opener

USE AND CARE GUIDE

MODEL 2246CAN

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed including the following:

◆ Read all instructions.

◆ To protect against risk of electrical shock do not put cord, plugs, or

appliance in water or other liquid.

◆ Close supervision is necessary when any appliance is used by or

near children.

◆ Unplug from outlet when not in use, before putting on or taking

off parts, and before cleaning.

◆ Avoid contacting moving parts.

◆ Do not operate any appliance with a damaged cord or plug or after

the appliance malfunctions, or is dropped or damaged in any manner. Contact Consumer Service for examination, repair or electrical or mechanical adjustment.

◆ The use of attachments not recommended or sold by the

manufacturer may cause fire, electric shock or injury.

◆ Do not use outdoors.

◆ Do not let cord hang over edge of table or counter.

◆ Do not let cord contact hot surface, including the stove.

◆ Do not open pressurized (aerosol-type) cans.

◆ Do not open cans of flammable liquids such as lighter fluids.

◆ To reduce the risk of fire or electric shock, do not operate any

heating appliance beneath the mounted unit.

◆ Do not mount the storage bracket/unit over or near any portion of

a heating or cooking appliance or a sink or basin.

SAVE THESE INSTRUCTIONS

For Household Use Only

ADDITIONAL IMPORTANT SAFEGUARDS

◆ All users of this appliance must read and understand this Use and

Care Guide before operating or cleaning this appliance.

◆ The cord to this appliance should be plugged into a 120V AC

electrical outlet only.

◆ Do not leave this appliance unattended during use.

◆ If this appliance begins to malfunction during use, immediately turn

the unit OFF and unplug the cord. Do not use or attempt to repair the malfunctioning appliance.

◆ IF this appliance falls or accidentally becomes immersed in water,

unplug it immediately. Do not reach into the water! Do not use this appliance after it has fallen into or becomes immersed in water.

◆ To reduce the risk of injury to persons or property, never use this

appliance in an unstable position.

◆ Do not use this appliance for other than its intended use.

Polarized Plug

This appliance has a polarized plug, (one blade is wider than the other). This plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way.

Short Cord Instructions

A short power-supply cord is provided to reduce the risk resulting from becoming entangled in or tripping over a longer cord.

Do not use an extension cord with this product.

Electric Power

If the electric circuit is overloaded with other appliances, your Toaster may not operate properly. It should be operated on a separate electrical circuit from other appliances.

Under-Cabinet Can Opener Use and Care Guide

How To Install Your Under-Cabinet Can Opener

1. This can opener is designed to be installed under a cabinet (see Figure 1). The hardware for installation is packaged in a separate plastic bag. To select a location for installation please consider the following:

A) An electrical outlet should be within easy reach of the cord so

that it will not drape over heating appliances or get in the way of your normal work area.

B) Do not install above a cooking or heating area such as a stove.

2. Position the mounting bracket at least 4 inches from the wall and leave sufficient room behind the can opener to insert a knife for sharpening. Use the included mounting template to mark the location of the screw holes.

3. Re-check that the unit is positioned in the desired area before drilling the holes in the cabinet. Using a 4 holes in the cabinet.

NOTE: If the cabinet has an overhang (Figure 1) you must use a spacer. The spacer should be the same thickness as the amount of overhang. The outside dimensions of the spacer are provided on the template. If a spacer is used, longer #8 x 32 machine screws are required. The screws should be 1 7⁄8inches under the head plus the thickness of the spacer.

4. The four screws may be installed from the top down or from the bottom up (see Figure 2). If installed from the top, be sure the bottom of the screw does not interfere with the body of the can opener and prevent assembly. If this occurs you will need to trim off the excessive screw length or you may place a spacer under the screw head. Place the hex nuts in the hex shaped recess of the mounting bracket and hold in place with the end of a pencil until you engage the threads.

NOTE: Do not tighten the screw all the way until you have inserted all 4 screws. Tighten all four screws. Insert the unit into the bracket (see Figure 3). Lock can opener into place by turning Removable Locking Knob clockwise (see Figure 4). Do not over-tighten.

⁄16inch drill bit, drill the

+ 8 hidden pages