Toa YP-M301 User Manual

Please follow the instructions in this manual to obtain the optimum results from this unit.
We also recommend that you keep this manual handy for future reference.

YP-M301HEADSET MICROPHONE

INSTRUCTION MANUAL

133-05-309-0A

Type Electret condenser type
Directivity Unidirectional
Sensitivity –41 dB (0 dB=1 V/Pa,

1 kHz, load: 2 kΩ)

Maximum Input Sound 117 dB SPL
Pressure

Terminal ø3.5 mm monaural plug
Cord Length 1.2 m
Finish Headband: ABS resin,

black

Weight 45 g (cable included)

4. SPECIFICATIONS1. GENERAL DESCRIPTION

The YP-M301 is a headset microphone designed to
be exclusively used with an optional WM-1100
Portable Transmitter.

3. HOW TO USE

• Put on the headset and adjust the slide arms so
that the head pads are positioned just over the
ears.

• Adjust a microphone boom, and position the
microphone (windscreen attached) at the mouth.

• Keep the microphone 3 – 5 cm away from the
mouth when using.

• Speaking loud or positioning the microphone too
close to the mouth could muffle sounds and make
them inaudible.

• The headset is not recommended for use in
aerobics or other vigorous performance
applications.

• Use the supplied case when storing the unit.

2. NOMENCLATURE

Note: The design and specifications are subject to

change without notice for improvement.

Storage case .............................................. 1

Windscreen (black) .................................... 2

• Accessory

Headband

Head pad

Slide arm

Microphone boom

Angle adjustable (360°)

3.5 mm-diameter monaural plug

Microphone

Windscreen

Maximum 60 mm