Toa XRS-101SCS Specifications

TOA INSTITUTIONAL COMMUNICATION SYSTEM

CORRECTIONAL/SECURITY SUB-STATION

XRS-101SCS

DESCRIPTION

The XRS-101 SCS security loudspeaking station

is designed to withstand damage caused by abuse,
moisture, corrosion, dust, vibration, and temperature
extremes from +150 to -30 degrees F. The station is
available in a (1) watt configuration, with a call origination
pushbutton, and a faceplate with an attached cone
speaker. The (8) ohm speaker is water and fungus
resistant and also functions as a microphone to provide
remote station communication, when included in a
centrally located master control system. The heavy­duty call origination switch is momentary action with
contacts that are rated at (3) amps., and is mounted
semi-flush to the plate for added security. The station is
available with (1) watt speakers, 25 volt transformers,
and 4-1/2" SQ faceplates.

FEATURES

1. Damage resistant intercom and paging
loudspeakers for indoor or outdoor installation,
providing protected high intelligibility communication.

2.

Durable mar-resistant 11 gauge stainless steel faceplate.

3. Vandal-resistant, weather-resistant call switch.

4. Environmentally resistant cone speaker.

5. Mounting hardware (included).

DIMENSIONAL DIAGRAM

APPLICATIONS

XRS-101 SCS

BACKBOXES

FLUSH: Standard 2-gang electrical box

(RACO #239 4” SQ box & #778, 2-gang ring;
or equivalent.)

CORRECTIONAL INSTITUTIONS
PARKING STRUCTURES
BUILDING STAIRWAYS AND HALLWAYS
SCHOOLS AND UNIVERSITIES
HOSPITAL ACCESS POINTS

ARCHITECTS’ AND ENGINEERS’ SPECIFICATIONS

The indoor and/or outdoor intercom sub-station shall be a
TOA model XRS-101SCS, or approved equal. The station
shall be comprised of an (8) ohm water and fungus

resistant cone speaker, mounted on an 11 GA. stainless
steel plate. The driver shall function as a microphone with a
minimum sensitivity of -26 dBm. The station equipped with
a call switch shall include a tamper-resistant, weather-

resistant, flush-mounted, momentary action pushbutton
switch with a contact rating of (3) amps. The station shall
have a power rating of (1) watt with a frequency response
of 400-4K Hz. The assembly shall include a 25 volt
transformer with 1, 1/2 watt taps. The station shall mount
with #6-32 flathead, tamper-resistant screws.

MODEL

XRS-101SCS

(1) BUTTON

STAINLESS STEEL

POWER TAPS

1, 1/2 watts

SOUND PRS LEVEL

93 dBm

FREQ. RES

400-4K Hz -26 dBm

SENS AS MIC

601 GATEWAY BOULEVARD, SUITE 300

SOUTH SAN FRANCISCO, CA 94080

415/588-2538 FAX [phone]