Toa TS-907 User Manual

INFRARED TRANSMITTER/RECEIVER
INSTRUCTION MANUAL
TS-907
Thank you for purchasing TOA's Infrared Transmitter/Receiver. Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.
1. GENERAL DESCRIPTION
The TS-907 Infrared Transmitter/Receiver is designed for the TOA Infrared Conference Systems. It is connected to the Central unit, and permits communications between the Central unit and Chairman/Delegate units in the systems. Communications between the TS-907 and Chairman/Delegate units are performed by means of infrared signals. Up to 12 TS-907 units can be installed in a system. For more information, refer to the instruction manual supplied with the Central unit.
3. SPECIFICATIONS
2. INFRARED SERVICE AREA
Note: The design and specifications are subject to change without notice for improvement.
Power Source 24 V DC (supplied from the optional TS-800 or TS-900)
Current Consumption Max. 180 mA
Wavelength 870 nm (AM: Brightness modulation)
Modulation Method Frequency modulation
Carrier Frequency Transmission: Audio channel 1: 7.35 MHz
Audio channel 2: 8.10 MHz Audio channel 3: 8.55 MHz Audio channel 4: 9.15 MHz Control channel: 6.45 MHz
Reception: Base language channel: 1.95 MHz
Translation language channel: 2.25 MHz
Acceptance Angle Vertical: 90° (45° + 45°), Horizontal: 360°
Emission Angle Vertical: 90° (45° + 45°), Horizontal: 360°
Communication Area Approx. 6 m in radius from the point underneath the unit
(ceiling height: 5 – 7 m)
Connection Terminal BNC jack
LED Indicator Power
Operating Temperature 0°C to 40°C
Finish Dome: PC resin, visible light cut filter
Base: ABS resin, black
Dimensions ø120 x 71.3 (h) mm
Weight 230 g (unit only)
Infrared Emitter/Detector
• Accessories
Mounting bracket .................................... 1
Stand mounting bracket .......................... 1
Screw M3 x 6 .......................................... 3
W5/16 – W5/8 thread adapter ................ 1
日本語の取扱説明書は裏面をご覧ください。
Notes
• Infrared signals cannot reach the Infrared Transmitter/Receiver unit if it is hidden behind the user or other objects. Install multiple Transmitter/Receiver units in line-of-sight from all Chairman and Delegate units.
• Install the Infrared Transmitter/Receiver units in such a way that each Chairman and Delegate unit can always communicate with two or more Transmitter/Receiver units. If installed in such a way that communication is only established with one Transmitter/Receiver unit, the infrared signal may be blocked by persons or other objects, possibly causing a momentary loss of signal reception.
Ceiling height
Radius of
communication area
5.0 m
5.5 m
6.0 m Approx. 6.0 m
6.5 m
7.0 m
This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.
URL: http://www.toa.jp/
Traceability Information for Europe (EMC directive 2004/108/EC)
Manufacturer:
TOA Corporation 7-2-1, Minatojima Nakamachi, Chuo-ku, Kobe, Hyogo, Japan
Authorized representative:
TOA Electronics Europe GmbH Suederstrasse 282, 20537 Hamburg, Germany
90°
Ceiling height
5 – 7 m
Radius of
communication area
Loading...