Infrared
Wireless
Conference
System
TS-900/800 Series
Installation made easier than
ever thanks to infrared system
coupled with clear sound
amplification.
Wireless conference system
provides flexible adaptation to
diverse styles of conference.
Infrared communication system
contributes to smoother management
of medium to small-scale conferences
■
Higher security with infrared communication
The system’s infrared communication method is not only resistant to
radio interference and eavesdropping, but it also permits simultaneous
use of systems in adjacent conference rooms with no crosstalk.
■
Easy installation
Infrared communication system eliminates the need of connecting the
conference units. Installation can be done quick and smart without
cumbersome cable arrangements.
■
Easy connection with a single coaxial cable
Central unit and Infrared Transmitter/Receiver unit can be connected
using a single coaxial cable.
■
Flexible adaptation to change of the number of participants or layout
Up to 96 Chairman and Delegate units can be used per system for TS-900 Series (up to 64 Chairman and Delegate units for TS-800 Series).
Cordless and easy-to-relocate feature makes the system ideal for any conference apt to change the number of participants or layout.
■
Compact light-weight Chairman/Delegate units
Microphone, monitor speaker, Talk key and Speech indicator are totally integrated.
When the unit’s Talk key is pressed, the Microphone indicator lights up to enter the mode accepting a speech. Microphone is removable for compact
storage.
■
Clear sound amplification and recording
The Chairman and Delegate units have a built-in monitor speaker which makes talker’s voice clearly audible at seat.
When recording equipment is connected to the Central unit, clear recording is possible which is indispensable in preparing conference minutes.
■
Selectable power supply system
Both Chairman and Delegate units can be operated on either their built-in rechargeable lithium-ion batteries (for approx. 10 hours use) or AC power supply.
Battery charger can recharge up to 8 lithium-ion batteries at a time in about 5 hours.
■
Adjustable to broader area use
Up to 16 Infrared Transmitter/Receiver units can be connected to expand the area of infrared communication coverage using a distributor.
* Up to 4 Infrared Transmitter/Receiver units can be directly connected to the Central unit. Distributors are needed in order to connect 5 or more Infrared Transmitter/Receiver units.
■
Capability of manipulation from PC or console (customized)
Using the customized software, it is possible to control the system from PC or console to perform recording, giving permission of speech, and
other operations.
● Other features
■
The Chairman units features a priority speech key which allows it to take precedence over
Delegate units when speaking.
■
Sounds from a wired microphone or sound source equipment can be heard from the Chairman
and Delegate units' speakers.
■
Two types of dedicated microphones are made available for the Chairman and Delegate units:
“standard” (368 mm long) and “long” (518 mm long).
■
Besides ceiling or wall mounting, the Infrared Transmitter/Receiver unit can also be tentatively
installed on a microphone stand (applicable thread size: W 5/16").
Remarkable Functionality
Six features addressing various
conference management needs
Features common in TS-900/800 series
Speaker restriction function to
1
The number of conference units
can be set for any of one, two
or four persons allowed to talk
at a time, preventing possible
disorder that could result from
simultaneous speeches by
participants.
2
When the Talk keys on the
conference units are pressed
beyond the restricted number
of talkers, the microphone
ON/OFF operation can be set
to any of the following; firstin-first-out, last-in-first-out, or
last-in-first-out after 2nd unit
(the microphone stays ON for
the unit whose Talk key was
first pressed).
prevent speech interruption
Speech system selection function
to set priority of speech
*Top of the Central unit
*Top of the Central unit
Features in TS-900 series only
Threefold choice vote function for
5
TS-900 series Chairman and Delegate units feature the
Vote key for threefold choice to enable easy balloting by
participants. The result is indicated on the Central unit,
allowing a quick vote.
• Vote result indicator of central unit TS-900
instantaneous voting and
totalization
• Vote key of
TS-902
Auto Mic-Off function to prevent
3
When this function is set to ON,
the microphone automatically
turns off if duration of silence
lasts for 30 seconds after it is
ON by pressing the Talk key.
4
When operated on the Central unit, the microphone
indicators on the Chairman and Delegate units light up.
In TS-900 series, the Central unit can indicate the number
of units. This feature allows the prior system check to
see if all units are capable of infrared communication.
inadvertent microphone shutoff
failure
*Top of the Central unit
Installation status checkup
function to show communicable
units at a glance
Main/Sub audio function to allow
6
TS-900 series system is capable of providing two types of
audios (main and sub) besides the conference unit’s
speech voice.
In TS-900 series, the Chairman and Delegate units are
equipped with the monitor selector key which enables
monitoring of desired main or sub audio.
bilingual conference
• Monitor selector key of TS-902
●
TS-900 Series System Example (Bilingual Conference System)
TS-900 Series
Transmitter/Receiver unit
High-end system with versatile functions to support sophisticated conference styles
Secretariat
Headphone
Headphone
Recording equipment
Sound source equipment
Operation PC
External control
Recording output
AUX3 input
Line output
MIC1 input
MIC2 input
Central unit
TS-900
Infrared
Transmitter/Receiver
input/output
Distributor
YW-1024
YW-1024
Infrared
TS-905/
TS-907
Connectable
up to 16 units
(TS-905)
and up to
12 units
(TS-907)
PA amplifier
Interpreter
(English
interpretation)
Wired microphone
(Japanese
interpretation)
Wired microphone
Audience
Standard
microphone
TS-903
Speaker
Chairman unit
TS-901
Chairman Delegate
Long microphone
TS-904
Delegate unit
TS-902
Long microphone
TS-904
Delegate unit
TS-902
Up to 96 units
*Chairman and Delegate units require lithium-ion battery BP-900 or AC adapter AD-0910.
Speaker
Secretariat
Chairman
Interpreter
(Japanese interpretation)
(English interpretation)
Delegate
Audience
System Features and Outline
• Bilingual conference system. Either English interpretation (main audio) or Japanese interpretation (sub audio) is selectable for
monitoring.
• Operations such as giving speech permission can be done from the operation PC. *Custom design.
• The number of conference units can be set for any of one, two or four persons allowed to talk at a time.
• All speeches during the conference can be recorded clearly. *Sub audio(Japanese interpretation) is not recorded.
• Threefold choice vote function enables the voting just at the press of a Vote key on each unit. The result can be instantly totalized
on the Central unit.
• Speeches can be addressed to audience via sound amplification. *The sub audio output is not amplified.
●
Parts Designation
TS-900 Series
Central Unit TS-900
■
Voting section
Simultaneous speaker
number setting key
Speech system selection key
Auto Mic-Off key
MIC1/AUX1 (main audio)
adjustment
MIC2/AUX2
(sub audio) adjustment
AUX3 adjustment
Headphone
adjustment
section
Volume control
Chairman Unit TS-901
■
(with standard microphone TS-903)
Indicator
Monitor speaker
Priority speech key
(PRIORITY)
Talk key (TALK)
Indicator
Vote key
Monitor selector key
(MAIN/SUB)
Headphone jack
(HEADPHONES)
Delegate Unit TS-902
■
(with long microphone TS-904)
Monitor speaker
Talk key (TALK)
Vote key
Monitor selector key
(MAIN/SUB)
Headphone jack
(HEADPHONES)
●
TS-800 Series System Example (Standard Conference System)
TS-800 Series
Simple style conference system with ultimate ease of use
Secretariat
Recording output
Recording equipment
Wired microphone
Sound source equipment
Chairman Delegate
Standard
microphone
TS-903
Chairman unit
TS-801
Up to 64 units
*Chairman and Delegate units require lithium-ion battery BP-900 or AC adapter AD-0910.
MIC input
AUX input
Long microphone
TS-904
Delegate unit
TS-802
Infrared
Transmitter/Receiver
input/output
Central unit
TS-800
Long microphone
TS-904
Delegate unit
TS-802
Distributor
YW-1024
Infrared
Transmitter/Receiver unit
TS-905/
TS-907
Connectable
up to 16 units
(TS-905)
and up to
12 units
(TS-907)
YW-1024
System Features and Outline
• Conference system for usual meetings
• The number of conference units can be set for any of one, two or four persons allowed to talk at a time.
•All speeches during the conference can be recorded clearly.
• As a custom feature, the operation of giving speech permission can be controlled from PC.
●
Parts Designation
TS-800 Series
Central Unit
■
Installation check
TS-800
button
MIC/AUX adjustment section
Headphone
adjustment
section
Chairman Unit
■
(with standard microphone TS-903)
Indicator
Monitor speaker
TS-801
Indicator
Delegate Unit
■
(with long microphone TS-904)
Monitor speaker
TS-802
Simultaneous speaker
number setting key
Speech system selection key
Auto Mic-Off key
Volume control
Priority speech key
(PRIORITY)
Talk key (TALK)
Headphone jack
(HEADPHONES)
Talk key (TALK)
Headphone jack
(HEADPHONES)
●
Notes on Installation of Infrared Transmitter/Receiver Unit
●
Notes on Installation of Infrared Transmitter/Receiver Unit
• Make sure to position the Chairman and Delegate units within the optimal coverage area of the Infrared Transmitter/Receiver unit.
•Infrared light will not reach the Infrared Transmitter/Receiver unit if it is located behind user or other obstacles. Install the
Infrared Transmitter/Receiver units in such a way that two or more units are visible from the Chairman and Delegate units.
•With only one Infrared Transmitter/Receiver unit used for communication, the reception can be interrupted if infrared signal is
obstructed by a person or an obstacle. Install two or more Infrared Transmitter/Receiver units
so that the Chairman and Delegate units can communicate with them at all times.
• Do not install the Infrared Transmitter/Receiver units close to the wall or an obstacle.
•Install the Infrared Transmitter/Receiver units at least 2-3 meters away from the nearest window.
Cover the windows with curtains or blinds to keep the units free from direct sunlight.
• Position the units at least 50 cm away from fluorescent lights.
• Keep away other infrared light sources.
Lighting equipment, LCD projectors, overhead projectors,
incandescent lamps, mercury-arc lamps, plasma displays, remote
controllers, infrared microphones, infrared equipment such as
infrared LANs, dimmers.
Optimal Coverage Areas
Tr anstmitter/ Ceiling Radius of
Receiver height coverage area
TS-905 3.5m
TS-907 6.0m Approx. 6.0m
2.5m
3.0m
4.0m
4.5m
5.0m
5.5m
6.5m
7.0m
Approx. 7.0m
Approx. 6.5m
● Infrared Transmitter/Receiver Units Arrangement Examples
[Conference room with 30 x 30 m area]
When the ceiling is lower than 7 meters, preferably arrange the
units 9 meters apart from each other as shown in the figure. A
service area covering every corner of the room can be secured.
Infrared transmitter/receiver
6m
9m9m
6m
6m
6m
9m
9m
*Choose the appropriate Transmitter/Receiver Unit according to the ceiling height.
● Notes on wiring
Infrared Transmitter/Receiver unit
L
[Conference room using a round table]
All Chairman and Delegate units are arranged around the table,
in which case only one Infrared Transmitter/Receiver unit may
suffice for complete coverage of conference communications.
Infrared Transmitter/Receiver unit
12 – 14m
Setup range of
Chairman and Delegate units
12 – 14m
● Distributor use
• Avoid connecting more than 2 distributors in series.
Connecting 3 or more distributors increases high frequency
signal loss, and could result in system malfunction.
• It is possible to mix Infrared Transmitter/Receiver units not
connected to any distributor, those connected to 1 distributor,
and those connected to 2 distributors in the same system.
Central Unit
B
AC
Distributor Distributor
D
D
D
D
If two or more Infrared Transmitter/Receiver units with different
connection cable lengths receive infrared signals from the
Chairman and Delegate units, the signal reception level may
decrease to cause malfunction.
• Ensure that the cable length between Infrared
Transmitter/Receiver unit and Central unit is identical.
Cable length between each Infrared Transmitter/Receiver
unit and Central unit: L=A+B=A+C+D
*This length must always be the same even if a distributor is in
Length between Infrared Transmitter/Receiver unit and distribut
Length between distributors (where two distributors are connected): C
Length between distributor and Central unit: A
cluded in the wiring.
or: D
●
Conditions for finding maximum cable length
The maximum cable length between each InfraredTransmitter/
Receiver unit and the Central unit differs depending on the type
of coaxial cable used. The following two requirements must be
met. The shorter length of the two results is considered to be
the maximum length allowed. Do not exceed the maximum
cable length.
1. Maximum allowable cable loss: 20 dB _ Total
distributor loss (varying with type of distributor and
the number of serially-connected distributors)
2. Maximum allowable cable DC voltage drop: 5 V
*For more details, please contact your dealer.
●
Dimensions / Specifications
TS-900/TS-800 (Central Unit)
■
*Appearance view of TS-900. TS-800 has the same dimensions.
INFRARED TRANSMITTER/RECEIVER
Ch4
VOTING
RS-232CAUX1 MIC1
LEVEL
359
FUNCTION SETTING
EXTERNAL
DATA
PRIORITY
PRIORITY
MAX MIC UNIT
TIME OUT
A124 B
COFFON
A:FIRST
B:LATEST
C:FIRST:FIXED; NEXT:LATEST
START/END
CHIME
AUX3
LINE OUT
REC OUT
A
117
MAIN+SUB
MAIN SUB
AUX1
AUX2
AUX3
100
100
100
MIC UNIT MIC UNIT
MIX
MIXCUT CUT
MIC1 MIC2
010 100
MIC UNIT INPUT
MAIN SUB LINE
0 10
179.8 118.8
HEADPHONES
0 10
20 140
100.3
21.2
70
AUX3 AUX2 MIC2
DC24V 3A(MAX)
SHORT
Figure as viewed from point A
CENTRAL UNIT TS-900
MIC UNIT
Ch1
Ch2 Ch3
DATA
BATTERY
POWER
1
23
CUT
MIX
Figure of the unit installed
TS-901/TS-801 (Chairman Unit), TS-902/TS-802 (Delegate Unit)
■
*Appearance view of TS-901/902. TS-801/802 have the same dimensions.
TS-901 TS-902
PUSH
TS-905/TS-907 (Infrared Transmitter/Receiver Unit)
■
Power indicator
LED
TS-903 (Standard microphone), TS-904 (Long microphone)
■
CHAIRMAN UNIT TS-901
213
POWER
PRIORITY TALK
210
3-M3
ø66
120°
10.8
ø120 60.5
15265.9
Top View
Front View
28
90
90
PUSH
210
1
2
0
°
ø108
1.6
Mounting Bracket
368
ø7
518
ø7
CHAIRMAN UNIT TS-902
213
POWER
TALK
2-ø4.5
(ceiling, wall, stand mounting)
ø66
3-M3
83.5
4.6
Mounting bracket (accessory)
Ceiling or Wall
Mounting Example
320
160
ø7
ø9
470
310
ø7
ø9
15265.9
80
Stand Mounting Brakcet
138.2
Microphone(option)
PHONEMONITOR
Right Side View
HEADPHONES
Left Side View
2-M3(bracket mounting)
100
83.5
13
22
W5/16(stand mounting)
Mounting bracket
(accessory)
Stand mounting bracket
(option)
Microphone stand
(option)
Model No.
Power Source
Power Consumption
Input
Output
Number of Connectable
Chairman/Delegate Units
Number of Connectable
Infrared Transmitter/Receiver Units
Infrared Transmitter/Receiver
I/O Terminal
External Control Terminal
LED Indicator
Microphone Mix/Cut Switch
(118.8)
(for the Base Language)
Microphone Mix/Cut Switch
(for the Translation Language)
AUX 3 Mixing Select Switch
Operating Temperature
Finish
Weight
Accessory
Option
Model No.
Power Source
Current Consumption
Wavelength
Modulation Method
Carrier Frequency
MIC1 (Base Language): –60 dB
MIC2 (Translation Language): –60 dB
AUX1 (Base Language): –20 dB
AUX2 (Translation Language): –20 dB
(Base and Translation Language): –20 dB
AUX3
LINE:–20 dB*,10 kΩ,unbalanced, phone jack
REC:–20 dB*,10 kΩ,unbalanced, phone jack,RCA pin jack
HEADPHONE: Mini jack
Voting result indicators 1-3 (7-segment LED, double-digit number),
Audio signal receiving indicators 1-4 CH, Data signal receiving indicator,
External control priority indicator, External control communication indicator,
Power indicator, Battery indicator (flashes when a Chairman/Delegate unit's battery nears complete discharge)
Simultaneous speaker No. setting switch: 1/2/4 Mic-off setting switch: TIME OUT ON/OFF
Speech priority selector switch: A/B/C
(A: First-in-first-out priority, B: Last-in-first-out priority, C: Fixed for the first unit, and last-in-first-out for the
subsequent units)
MIC/CUT (Mix): Chairman/Delegate units + MIC 1 + AUX 1 + AUX 3
➝
Base Language (Cut): MIC 1 + AUX 1 + AUX 3 ➝Base Language
MIC/CUT (Mix): Chairman/Delegate units + MIC 2 + AUX 2 + AUX 3
➝
Translation Language (Cut): MIC 2 + AUX 2 + AUX 3
MIC/CUT (Mix): AUX 3 input is relayed to the line output.
(Cut): AUX 3 input is not relayed to the line output.
AC adapter (Cord length: 1.8 m DC cord, and 2 m detachable AC cord) × 1
7.4 V DC (battery), 9 V DC (AC adapter)
(supplied from BP-900 battery (option) or AD-0910 AC adapter (option))
MAX. 270 mA
870 nm (AM: Brightness modulation)
Frequency modulation
Transmission: Audio channel 1: 7.35 MHz
Reception:
Acceptance Angle
Infrared Emitter/Detector
Emission Angle
POWER
ON
OFF
Covering Range
Input
Output
LED Indicator (TS-901/9029
Battery Life
Operating Temperature
Finish
Dimensions
Weight
Option
Model No.
Power Source
Current Consumption
Wavelength
Modulation Method
Carrier Frequency
2
Acceptance Angle
Infrared Emitter/Detector
Emission Angle
Covering Range
Communication Area
Connection Terminal
LED Indicator
Operating Temperature
Finish
Dimensions
Weight
Accessory
Option
Model No.
Type
Directivity
ø25
Rated Impedance
Rated Sensitivity
LED Indicator
Frequency Response
Output Connector
Finish
Weight
Applicable Unit (Option)
ø25
Vertical: 90°, Horizontal: 120°
Vertical: 90°, Horizontal: 120°
7 m (radius)
Microphone terminal: Combined type of XLR-4-31 (dedicated for connecting the optional TS-903 or TS-904)
Monitor speaker: 8Ω, 0.2 W
Headphone: Mini jack × 2
Speech indicator (flashes when the unit is out of communications range),Voting status indicators 1 -3 (flashes when the unit is out of communications
range or when the battery level is low), Power indicator (flashes when the unit is out of communications range or when the battery level is low)
Speech indicator (flashes when the unit is out of communications range), Power indicator
(flashes when the unit is out of communications range or when the battery level is low)
Approx. 10 hours (when the fully-charged BP-900 battery is used with "During Speech" to "Standby" ratio of 1:2)
0°C to +40°C
Top panel: ABS resin, gray metallic, paint, semi-gloss
210 (W) × 65.9 (H) × 152 (D) mm
Microphone: TS-903, TS-904 (Select either one.)
Lithium-ion battery: BP-900 AC adapter: AD-0910
24 V DC (supplied from the optional TS-900 or TS-800)
Max.100 mA Max.180 mA
870 nm (AM: Brightness modulation)
Frequency modulation
Transmission: Audio channel 1: 7.35 MHz
Reception: Base language channel: 1.95 MHz
Vertical: 150° (75° + 75°), Horizontal: 360°
Vertical: 150° (75° + 75°), Horizontal: 360°
7m —
— Approx. 6m in radius from the point
BNC jack
Power
0°C to +40°C
Dome: PC resin, visible light cut filter
Base: ABS resin, black
ø120 × 71.3 (H)mm
230 g (unit only)
Mounting bracket × 1, Stand mounting bracket × 1
Microphone stand (The mounting thread size must be W 5/16.)
TS-900
100-240 V AC, 50/60Hz (supplied from AC adapter (accessory))
*
, 600Ω,unbalanced, phone jack
*
, 600Ω,unbalanced, phone jack
*
,10 kΩ,unbalanced, phone jack
*
, 10 kΩ,unbalanced, phone jack
*
,10 kΩ,unbalanced,phone jack
72W
96 units
4 units (up to 16 units by using four Distributors)
4 BNC jacks
D-sub connector (9 P, male)
➝
Translation Language
Panel: Surface-treated steel plate, gray metallic, paint, semi-gloss
2.8kg
0°C to +40°C
Rack mounting bracket: MB-TS900
TS-901/902 TS-801/802
Audio channel 2: 8.10 MHz
Audio channel 3: 8.55 MHz
Audio channel 4: 9.15 MHz
Control channel: 6.45 MHz
Base language channel: 1.95 MHz
Translation language channel: 2.25 MHz
640g 630g
TS-905
Audio channel 2: 8.10 MHz
Audio channel 3: 8.55 MHz
Audio channel 4: 9.15 MHz
Control channel: 6.45 MHz
Translation language channel: 2.25 MHz
Vertical: 90° (45° + 45°), Horizontal: 360°
Vertical: 90° (45° + 45°), Horizontal: 360°
underneath (Ceiling height: 5 – 7m)
TS-903 TS-904
Electret condenser microphone
Undirectional
1.8kΩ
–37dB (1kHz, 0dB = 1V/Pa)
Speech indicator (ring type)
100 – 13,000Hz
Combined type of XLR-4-32
Gooseneck: Stainless steel, black
Other: ABS resin, black
90g 105g
Chairman/Delegate units: TS-801, TS-802, TS-901, TS-902
TS-900
MIC: –60 dB*, 600Ω,
unbalanced, phone jack
AUX: –20 dB*, 10 kΩ,
unbalanced, phone jack
REC: –20 dB*, 10 kΩ,
unbalanced, phone jack, RCA pin jack
HEADPHONE: Mini jack
64 units
Audio signal receiving indicators 1-4 CH,Data signal receiving
indicator, External control priority indicator, External control
communication indicator, Power indicator, Battery indicater
(flashes when a Chairman/Delegate unit's battery nears
complete discharge)
—
—
—
2.7kg
*0dB=1V
TS-907
■
Peripheral Equipment / Specifications
LITHIUM-ION BATTERY BP-900 (CE)/BP-900 (UL)
■
The BP-900 is a rechargeable lithium-ion battery designed for exclusive use with the
conference units TS-801, TS-802, TS-901, and TS-902.
7.4 V DC
1700 mAh
0°C to +40°C
71.6 (W) × 20.4 (H) × 37.6 (D) mm
95 g
Terminal protection cover (pre-installed at the factory)
×
1
BATTERY CHARGER BC-900
■
Nominal Voltage
Nominal Capacity
Operating Temperature
Dimensions
Weight
Accessory
The BC-900 is a dedicated battery charger for the BP-900 (optional) used in the Chairman Units, and
Delegate Units. It permits up to 8 batteries to be simultaneously charged within up to 5 hours.
Power Source
Current Consumption
Charging Time
Charging Capacity
LED Indicator
Operating Temperature
Finish
Dimensions
Weight
Accessory
RACK MOUNTING BRACKET MB-TS900
■
100 – 240V AC, 50/60 Hz (supplied from AC adapter (accessory))
Max. AC2A
Approx. 5 hours
8 BP-900 batteries (option)
Charging status (Green: Full charge, Red: On charge),
Power indicator
0°C to +40°C
Case: Steel, black, paint
Battery receptacles: PPO resin, black
240 (W) × 70 (H) × 115 (D) mm
Unit: 1.1 kg, AC adapter: 520 g
AC adapter (Cord length: 1.5 m DC cord, and 2 m detachable AC cord)
×
1
AC ADAPTER AD-0910
■
The AD-0910 is an AC adapter to operate the Chairman units TS-801 and TS-901,
and the Delegate units TS-802 and TS-902 on AC.
DISTRIBUTOR YW-1022 (to 2 outputs), YW-1024 (to 4 outputs)
■
The YW-1022 . YW-1024 is a distributor that can work in the frequency range of 1.6 to
1,000 MHz (except 50 to 70 MHz). Power passing type permits easy power supply.
The MB-TS900 Rack Mounting Bracket is designed for exclusive use with the Central units TS-800
and TS-900 of the TOA Infrared Conference Systems.
The MB-TS900 is a 4-units size that can be mounted in an EIA Standard equipment rack.
Finish
Dimensions
Weight
Accessory
Surface-treated steel plate, gray metallic, paint,
semi-gloss
65.5 (W) × 177 (H) × 61 (D) mm
680g
Rack mounting screw
×
4, Rack mounting washer
×
4
YW-1022
YW-1024
Power Source
Output
Ripple Voltage
Power Consumption
Cord Length
Plug
Operating Temperature
Finish
Weight
Accessory
Model No.
Frequency Range
Distribution Loss
Input/Output Impedance
Coaxial Connector
Operating Temperature
Finish
Dimensions
Weight
100 – 240V AC, 50/60Hz
9V DC, 1 A
100mV (p-p)
400mA AC, Input 100V
1.8m
RC6705, center “+”
0°C to +40°C
Case: PC/ABS alloy, black
190g
AC power cord (2 m) × 1
4.5dB ±3dB (between the Mixing
and each Distribution terminals)
Mixing terminal: BNC jack, power passing type (under 30 V DC, under 2 A)
Distribution 1 and 2(YW-1022), 1-4(YW-1024) terminals: BNC
jack, power passing type (under 30 V DC,under 1 A)
YW-1022
1.6 – 1,000 MHz (excluding 50 – 70 MHz)
–10°C to +50°C
ABS resin, gray
75 (W) × 122 (H) × 34 (D) mm
105g 120g
YW-1024
8.5dB ±3dB (between the Mixing
and each Distribution terminals)
75Ω
TOA Corporation
URL:http://www.toa.jp/
Specifications are subject to change without notice.
Printed in Japan (0601) 833-52-319-6A U
Loading...