9000M2 Series
Modular Digital Matrix Mixer
and Mixer/Amplifiers
Unparalleled DSP mixer ideal for multi-zone paging,
music distribution and room-combining applications.
The 9000 Series Modular Digital Matrix Mixer
and Mixer/Amplifiers redefine the conventional
mixer/amplifier category by combining a
modular matrix mixer, digital signal processor
and amplifiers in a compact, two rack space
package. The versatile series is ideal for multizone paging, music distribution and roomcombining applications.
The series allows for easily configured,
custom systems with up to eight mic/line
inputs and eight outputs. Each 9000 Series
chassis has two output channels with builtin DSP, including ten band parametric EQ,
compressor, delay and more. Input and
output modules include additional DSP.
An integrated operating mode provides
powerful functionality for both simple mixing
and complex multi-zone paging applications.
Features include telephone zone paging,
automatic microphone mixing and ambient
noise control.
Features Applications
• Combination of Matrix and Mixer Mode
• 8 slots for modules
• 4 priorities selectable
• 2 DSP output channels included
• 10-band parametric equalizer
• Ducker-function (priority)
• Restaurants & bars
• Hotels
• Conference & board rooms
• Auditoriums
• Offices
• Museums
• Fitness clubs
• Theme parks
• Houses of worship
M-9000M2 Digital Mixer
Features:
• Flexible modular design - up to 8 mic/line inputs and 8 outputs
• Any combination of inputs may be routed to any combination of outputs
• Detailed GUI software screens make even complex settings intuitive and easy to understand
• Use up to 16 dedicated RS-485 wall-mount remote controls, or control from 3rd party systems using RS-232
• 32 scene memories and 32 paging memories
• Accepts 9000 and 900 series modules (9000 modules are dual input and include DSP, except for the ZP-001T)
• 2 built in line level outputs on frame
• Requires at least one input module
Specifications
Power Source 120 V AC, 60 Hz
Power Consumption 40W
Audio Input Max. 8 channels, modular construction (modules optional)
Audio Output Preamplifier output 1, 2: 0 dB, 600 Ω, balanced, removable terminal block (3 pins)
Module Slot
Digital Audio Signal Reference Level -20 dBFS
Power Bandwidth 20 - 20,000 Hz, 0.008% THD
Frequency Response 20 - 20,000 Hz, +1, -3 dB
Total Harmonic Distortion 0.008% (at 22 kHz LPF, 1 kHz, +10 dB output)
S/N Ratio
Cross Talk Over 64 dB (at 20 kHz)
Tone Control Bass: ±12 dB (at 100 Hz), Treble: ±12 dB (at 10 kHz)
Parametric Equalizer
High-pass Filter
Low-pass Filter
Compressor Depth: 1 - 5
Delay 0 - 40 ms (1 ms steps), maximum 40 ms (CH 1 + CH 2) (mixer mode only)
Scene/Event Memory 32
Auxiliary Function Key lock function
Control Input/Output
Operating Temperature -10
Operating Humidity 35% to 80% RH (no condensation)
Finish Panel: Aluminum, hair-line, black; Case: Surface-treated steel plate, black, paint
Dimensions 16.54” (W) x 4.24” (H) x 13.9” (D) / 420 (W) × 107.6 (H) × 353 (D) mm
Weight 13.23lbs / 6kg
Included Accessories
M-9000M2
Analog input (slot 1 - 8): -10 dB, 10 k Ω, unbalanced; Digital input (slot 1 - 4): 24 bit/48 kHz;
MIX output (slot 1 - 8): -14 dB, 330 Ω (CH 1 prefader output), unbalanced; Digital output (slot 5 - 7): 24 bit/48 kHz;
Power supply (slot 1 - 8): +24 V, -24 V, +6 V DC
At Input short, 20 - 20,000 Hz, set to ALL FLAT or OFF setting; Output volume min.: 90 dB;
Output volume max.: 61 dB (Input 1 volume: 0 dB, Other Inputs: OFF)
10 bands, Freq: 20 - 20,000 Hz, 31 points, various range: ± 12 dB, Q: 0.3 - 5
-12 dB/oct, Variable frequency range: 20 - 20 kHz, 31 points
RS-232C, D-sub connector (9P, female); Control input: 4 inputs, no-voltage make contact input, open voltage: 3.3 V DC, short-circuit
current: Under 1 mA, removable terminal block (14 pin); Control output: 4 outputs, open collector output, with stand voltage: 27 V DC,
control current: 50 mA, removable terminal block (14 pin); Remote volume: 2 channels, connect a 10 kΩ/linear taper variable resistor (AT-10K) or
input DC voltage of 0 to +10 V, removable terminal block (14 pin)
o
C to +40oC / 14°F to 104°F
Power cord (6.56ft [2m]) x 1, Rack mounting bracket x 2, Bracket mounting screw x 4, Blank panel x 7, Blank panel mounting screw x 14,
Removable terminal plug (3 pin) x 2, Removable terminal plug (14 pin) x 1 , CD x 1
A-9000 Series Digital Matrix Mixer/Amplier
The TOA A-9000M2 Series Digital Matrix Mixer/Amplifier redefines the conventional mixer/amplifier by combining a
modular frame, matrix mixer, digital signal processor (DSP) and amplification in a compact, two rack space package.
The A-9000M2 series is ideal for multi-zone paging, music distribution and room-combining applications. The A-9000M2
Series allows for easy configuration of custom systems with up to eight discrete mic/line inputs and eight discrete outputs. Each A-9000M2 Series chassis has two output channels (amplified or line level depending on model) with built-in
DSP, including ten band parametric EQ, compressor, and delay. Additional DSP is provided by adding input output cards
as required. The A-9000M2 system provides powerful tools for both simple mixing and complex multi-zone paging applications. Input modules include SIP-based multi-zone paging, analog (DTMF) telephone zone paging, and ambient noise
control. Dual-channel output modules are available (up to 3 per frame). Contact closure interface and RS-485 control
interface cards (for TOA ZM series remote controls) are also available.
Specifications
Power Source 120 V AC, 60 Hz
Power Consumption 150 W 250 W
Audio Input Max. 8 channels, modular construction (modules optional); Power amplifier input 1, 2: 0 dBV, 10k Ω, RCA pin jack
Audio Output
Module Slot
Digital Audio Signal Reference Level -20 dBFS
Power Bandwidth 20 - 20,000 Hz, 0.008% THD
Frequency Response Power amplifier section: 20 - 20,000 Hz, +0, -1 dB; Analog input module to speaker output: 20 - 20,000 Hz, +1, -3 dB
Total Harmonic Distortion
S/N Ratio
Cross Talk Over 64 dB (at 20 kHz)
Tone Control Bass: ±12 dB (at 100 Hz) Treble: ±12 dB (at 10 kHz)
Parametric Equalizer 10 bands, Freq: 20 - 20,000 Hz, 31 points, various range: ± 12 dB, Q: 0.3 - 5
High-pass Filter
Low-pass Filter
Compressor Depth: 1 - 5
Delay 0 - 40 ms (1 ms steps), maximum 40 ms (CH1 + CH2) (Mixer mode only)
Scene/Event Memory 32
Auxiliary Function Key lock function
Control Input/Output
Operating Temperature -10oC to +40oC (14°F to 104°F)
Operating Humidity 35% to 80% RH (no condensation)
Finish Panel: Aluminum, hair-line, black; Case: Surface-treated steel plate, black paint
Dimensions 16.54” (W) x 4.24” (H) x 15.55” (D) / 420 (W) × 107.6 (H) × 395 (D) mm
Weight 19.84lbs (9kg) 24.25lbs (11kg)
Accessory
A-9060DHM2 A-9120DHM2
Speaker output 1, 2: 60W, 70.7V line, 83Ω x 2, BTL output,
removable terminal block (4 pins)
Analog input (slot 1 - 8): -10 dB, 10 kΩ, unbalanced; Digital input (slot 1 - 4): 24 bit/48 kHz; MIX output (slot 1 - 8): -14 dB, 330Ω
(CH 1 prefader output), unbalanced; Digital output (slot 5 - 7): 24 bit/48 kHz; Power supply (slot 1 - 8): +24 V, -24V, +6V DC
Power amplifier section: 0.0008% (22 kHz LPF, 1 kHz, rated power); Analog input module to speaker output: 0.008% (22 kHz LPF,
At Input short, 20 - 20,000 Hz, ALL FLAT or OFF setting; Output volume min.: 90dB (preamplifier output); Output volume max.:
RS-232C; D-sub connector (9P, female); Control input: 4 input, no-voltage make contact input, open voltage: 3.3V DC, short-circuit
current: Under 1 mA, removable terminal block (14 pins); Control output: 4 outputs, open collector output, withstand voltage: 27V
DC, control current: 50 mA, removable terminal block (14 pins); Remote volume: 2 channels, connect a 10k Ω/linear taper variable
Power cord (2 m (6.56ft)) x 1, Rack mounting bracket x 2, Bracket mounting screw x 4, Blank panel x 7, Blank panel mounting
61dB (preamplifier output, input 1 volume: 0 dB, other inputs: OFF); Power amplifier section: 110dB
screw x 14, Removable terminal plug (4 pins) x 1, CD x 1, Removable terminal plug (14 pins) x 1
Preamplifier output 1, 2: 0dBV, 300Ω, unbalanced, RCA pin jack
-12 dB/oct, variable frequency range: 20 Hz - 20 kHz, 31 points
register or input the DC voltage of 0 to +10 V, removable terminal block (14 pins)
Speaker output 1, 2: 120W, 70.7V line, 41Ω x 2, BTL output,
removable terminal block (4 pins)
1 kHz rated power)
A-9000 Series Digital Matrix Mixer/Amplier
• Flexible modular design - up to 8 mic/line inputs and 8 total outputs
• Intuitive GUI software
• RS-232 control for 3rd party control systems
• EQ presets for 30 TOA loudspeakers included
• Accepts TOA ZM series remote controls (RC-001T may be required)
• 32 scene memories and 32 paging memories
• Up to 12 filters plus compressor available for each input and output channel
Specifications
Power Source 120 V AC, 60 Hz
Power Consumption 100W 150W 250W
Audio Input
Audio Output Preamplifier output 1: 0 dB, 300 Ω, unbalanced, RCA pin jack
Module Slot Analog input (slot 1 - 8): -10 dB, 10 k Ω, unbalanced; Digital input (slot 1 - 4): 24 bit/48 kHz;
Digital Audio Signal Reference Level -20 dBFS
Power Bandwidth (D): 20 - 20,000 Hz, 0.02% THD
Frequency Response Power amplifier section: 20 - 20,000 Hz, +0, -1 dB
Total Harmonic Distortion Power amplifier section: 0.008% (22 kHz LPF, 1 kHz, rated power)
S/N Ratio At Input short, 20 - 20,000 Hz, set to ALL FLAT or OFF setting;
Cross Talk 64 dB or more (at 20 kHz)
Tone Control Bass: ±12 dB (at 100 Hz), Treble: ±12 dB (at 10 kHz)
Parametric Equalizer
High-pass Filter
Low-pass Filter
Compressor Depth: 1 - 5
Delay 0 - 40 ms (1 ms steps), maximum 40 ms per output
Scene/Event Memory 32
Auxiliary Function Key lock function
Control Input/Output RS-232C, D-sub connector (9P, female); Control input: 4 inputs, no-voltage make contact input, open voltage: 3.3 V DC, short-circuit
Operating Temperature -10
Operating Humidity
Finish Panel: Aluminum, hair-line, black; Case: Surface-treated steel plate, black, paint
Dimensions
Weight
Accessory Power cord
A-9060SM2 A-9120SM2 A-9240SHM2
Max. 8 channels, modular construction (modules optional); Power amplifier input 1, 2: 0 dBV, 10k Ω, RCA pin jack
Preamplifier output 2: 0 dB, 600 Ω, unbalanced, removable terminal block (3 pins)
Removable terminal block (7 pins); Direct: 60W,
4Ω, unbalanced, Transformer: 60W, 8Ω 25V and
70V, balanced
MIX output (slot 1 - 8): -14 dB, 330 Ω (CH 1 prefader output), unbalanced; Digital output (slot 5 - 7): 24 bit/48 kHz;
(T): 50 - 20,000 Hz, 0.5% THD
Analog input module to speaker output: 0.008% (22 kHz LPF, 1 kHz, rated power)
Output volume min.: 90 dB (preamplifier output); Output volume max.: 61 dB
(preamplifier output, input 1 volume: 0 dB, other inputs: OFF); Power amplifier section: 110 dB
10 bands, Freq: 20 - 20,000 Hz, 31 points, various range: ± 12 dB, Q: 0.3 - 5
current: Under 1 mA, removable terminal block (14 pins); Control output: 4 outputs, open collector output, with stand voltage: 27 V DC,
control current: 50 mA, removable terminal block (14 pins); Remote volume: 2 channels, connect a 10 kΩ/linear taper variable resistor or
16.54” (W) x 4.24” (H) x 13.98” (D) / 420 (W) × 107.6 (H) × 355 (D) mm
24.25lbs (11kg) 28.66lbs (13kg) 24.25lbs (11kg)
Removable terminal plug (3 pins) x 1, Removable terminal plug (4 pins) x 1, Removable
Speaker output: Removable terminal block (7
pins); Direct: 120 W, 4Ω, unbalanced; Transformer: 120 W, 8Ω 25V & 70V, balanced
Power supply (slot 1 - 8): +24 V, -24 V, +6 V DC
Analog input module to speaker output: 20 - 20,000 Hz, +1, -3 dB
-12 dB/oct, Variable frequency range: 20 - 20 kHz, 31 points
input DC voltage of 0 to +10 V, removable terminal block (14 pins)
(2 m / 6.56ft) x 1, Rack mounting bracket x 2, Bracket mounting screw x 4,
Blank panel x 7, Blank panel mounting screw x 14,
o
C to +40oC (14°F to 104°F)
35% to 80% RH (no condensation)
terminal plug (14 pins) x 1 , CD x 1
Speaker output: 240 W (70 V) removable terminal block (4 pins)
20 - 20,000 Hz, 0.008% THD
16.54” (W) x 4.24” (H) x 15.55” (D)
420 (W) × 107.6 (H) × 395 (D) mm
P-9000 Series Power Ampliers
Features
• 2-Channel Power Amplifiers with 70.7V outputs
• Power Amplifier models feature flexible output power allowing up to 50% power from
one amplifier channel to be allocated to the second amplifier channel
• Channel 1 & 2 inputs balanced with selectable input sensitivity: 0dB or -20dB
• Channel 1 input may be routed to both channels
• 2 RU Rack Mounting hardware included
• Front panel LED indicators for: Protect, Peak, Signal and Power
Specifications *0 db
Output Power 2x 60W @ 70.7V 2x 120W @ 70.7V
Input
Power Bandwidth 20 – 20,000 Hz, 0.08% T.H.D.
Frequency Response 20 – 20,000 Hz (–3 dB, +1 dB)
Total Harmonic Distortion 0.008% (22 kHz LPF, 1 kHz, rated output, input level selector switch in 0 dB* position)
S/N Ratio
Function Output disconnected for approx. 5 s after switching power on
LED Indicator Power (blue) x 1, Protect (red) x 2, Peak (red) x 2, Signal (green) x 2
Ventilation System Forced air cooling (fan speed: variable with temperature)
Power Source 120 V AC, 60 Hz
Power Consumption 225W (rated output), 106W (UL60065) 404W (rated output), 208W (UL60065)
OperatingTemperature 14° to 104° F (-10° to 40° C)
Operating Humidity 35% to 80% RH (no condensation)
Finish Panel: Aluminum, hair-line, black; Case: Surface-treated steel plate, black paint
Dimensions (W x H x D) 16.54" x 4.24" x 15.98"
Weight (without modules) 18.08 lbs (8.2 kg) 22.05 lbs (10kg)
P-9060DH P-9120DH
CH 1, CH 2 input: –20 dB* or 0 dB* (switchable), 10 kΩ, electronically-balanced, removable terminal block (3 pins),
CH 1 mode ON/OFF switch (ON: CH 1 to All ch, OFF: Each ch)
At Input short, 20 – 20,000 Hz, Input level selector switch in 0 dB* position
Output volume min.: 105 dB, Output volume max.: 97 dB
9000M2 Series Modules
AN-001T
Ambient Noise Controller Module
• Automatically adjusts output gain to
compensate for changes in ambient noise
level
• Each input can be assigned to control a
specific output
• 24VDC phantom power for condenser mics
• 14 preset gain ratios
• Use with model AN-9001 sensing
microphone (not included)
• Maximum two per chassis
C-001T
Input/Output Control Module
• Eight assignable control inputs for activating
event volume, up/down, mute, power on/off,
emergency mute or synch on/off
• Eight assignable control outputs for
activating external relays
• Removable terminal block
• Maximum one per chassis
D-001T
Dual Mic/Line Input Module with DSP
• Two balanced Mic / Line inputs
• Digital signal processing (10-Band
Parametric EQ, Bass/ Treble, Loudness,
High and Low Pass Filters, Compressor)
• Adjustable sensitivity (-60 to -10 dBV)
• Phantom power (24 VDC)
• Maximum four per chassis
SP-11NPS
SIP Module
• Allows zone paging from SIP phone systems
• Onboard browser provides easy set up from
a PC
• Five dry contact outputs can be assigned to
control contact inputs on the 9000 to route
calls by zone
• Priority function is available
RC-001TPS
Control Module
• Supports up to 8 ZM Series remote control
panels per port (2 ports per card)
• Bi-directional RS-485 communication provides
control and status feedback for each remote
function
• May be used in combination with C-001T
• Supports ZM-9011, ZM-9012, ZM-9013, ZM9014 remote controls
• AD-246 - AC adapter supplied (qty 1 supplied
additional AD-246 required for 2nd port)
T-001T
Dual Line Output Expansion Module with DSP
• Two balanced line level outputs
• Digital signal processing (10-Band Parametric
EQ, Bass/ Treble, Loudness, High and Low
Pass Filters, Compressor, TOA speaker EQ
presets)
• Maximum three per chassis
D-001R
Dual Line Input with DSP
• Two RCA phono inputs per channel provides
stereo summing
• Digital signal processing (10-Band
Parametric EQ, Bass/ Treble, Loudness,
High and Low Pass Filters, Compressor)
NM-01
Noise Generator
• Generates band-limited pink noise for use in
sound masking applications
• In/Out processor loop for external EQ
• Uses 1 9000 Series dual input slot
ZP-001T
Telephone Zone Paging Module
• Analog telephone paging to up to eight zones
• Requires DTMF
• Dial up to eight output zones in one operation
• Analog extension or page port compatible
• Page port operation requires contact closure
activation
• RJ-11 telephone jack and removable terminal
blocks
• Maximum one per chassis
9000M2 Series Accessories
AN-9001
Ambient Noise Sensing Microphone
• Ceiling or wall-mount condenser microphone
• Fits one gang electrical box
• Use with AN-001T module or DP-L2
processor
SS-9001PS
4-Zone Speaker Selector
• Switch up to four speaker lines on one
amplifier output
• Two speaker amplifier inputs provide
uninterrupted BGM for unpaged zones
• Works with built in 9000M2 I/O control output,
optional C-001T module or Q-RM9012PS
• Wall-mount bracket included
• Supplied with AD-246 AC Adapter
ZM-9001
Remote Panel
• Six buttons to activate preset selection or
volume up/down
• Wiring: one pair to chassis remote volume
terminals
• Max. loop resistance: 100 ohms (3000 ft.
22AWG)
• Fits one gang electrical box
• Maximum one ZM-9001/ZM-9002/ZM-90003
per remote volume terminal (2 terminals per
chassis)
ZM-9011
Assignable Remote Button Panel
• Fits in a standard 1-gang electrical box
• Four assignable buttons each with LED status
indicator
• Controls Xpoint settings (on/off, select),
paging activation, scene and relay activation
• Supplied matching decor plate
• Requires RC-001T
ZM-9012
Assignable Volume Controller
• Fits standard 1-gang electrical box
• Multi-segment LED indicator provides visual
volume level status
• Rotary encoder can be assigned to control
any input or output volume
• Multiple input or outputs may be “ganged” for
master volume control
• Supplied matching decor plate
• Requires RC-001T
ZM-9013
Assignable Remote Button Panel
• Fits in a standard 2-gang electrical box
• Eight assignable buttons each with LED
status indicator
• Controls Xpoint settings (on/off, select),
paging activation, scene and relay activation
• Supplied matching decor plate
• Requires RC-001T
ZM-9002
Remote Panel
• Volume control knob
• Wiring: one pair to chassis remote volume
terminals
• Max. loop resistance: 100 ohms (3000 ft.
22AWG)
• Four push buttons to activate preset
selection or volume up/down
• Fits one gang electrical box
• Maximum one ZM-9001/ZM-9002/ZM-90003
per remote volume terminal (2 terminals per
chassis)
ZM-9003
Contact Closure Remote
• Fits in a standard 2-gang electrical box
• Two momentary buttons and four latching
buttons
• Requires C-001T for full functionality
• May be assigned to control program
change, volume up/down, channel on/mute,
emergency mute, power and paging prohibit
function
• Maximum one ZM-9001/ZM-9002/ZM-90003
per remote volume terminal (2 terminals per
chassis)
ZM-9014
Assignable Remote Button Panel with Volume
Control
• Fits in a standard 2-gang electrical box
• Four assignable buttons each with LED status
indicator
• Controls Xpoint settings (on/off, select),
paging activation, scene and relay activation
• Assignable ID rotary adjustment on box
• Supplied matching decor plate
• Requires RC-001T
Corporate Office
PM-660U
PBX
Phone
9000M2 Paging Applications
A -9 12 0 D HM 2C U
Digital Ma trix Mixer / Amplifier
DA -5 50F CU
Power Amplifier
Hall A
Hall B
PC-580RU AM
Cafeteria
PE-304
Auditorium
HX- 5B
Security office
Retail
CD play er
Satellite recei ver
Phone
PBX
A -9 12 0 D HM 2C U
Digital Ma trix Mixer / Amplifier
DA -250FH CU
Power Amplifier
DA -250DH CU
Power Amplifier
F-1000BT
C S -15 4
F-2322CU2
SC-615T
PE-304
F-1000BT
F-2322CU2
F-2322CU2
Z M- 9 012
Entrance/
Parking
Warehouse/
Storeroom
Cashier s
Dressi ng
rooms
De pt .A
De pt .B
F-2322CU2
Restuarant
DM -13 0 0US (P a gin g)
9000M2 Music Distribution Applications
F-1000WTWP
Volume & s our ce
selec tion
ZM- 90 14
Entrance/
Wating
area
BGM Pla y er
CD /MP3 Pl a yer
CATV
DVD Player
Fitness Club
Inst ructor
WS-5325H
Digital Ma trix Mixer / Amplifier
3rd-p arty
touch-panel controller
A -9 12 0 D HM 2C U
RS-232
DA -250DH
Power Amplifier
PC-580R
F-122CU2
F-2000BT
F-2322CU2
F-2322CU2
Ki tchen
Dining
area
Bar
area
Volume & s our ce
selec tion
ZM- 90 14
Fr ont
Desk
Locker
room s
WT-5800
DT-930 UL AM/FM Tuner
Satellite recei ver
CD /MP 3 Pl a ye r
MP3 Pla y er
Docking Station
M-9000M2 CU
Digit al Matrix Mixer
P-9120DH CU
Power Amplifier
DA -250DH
Power Amplifier
DA-550F
Power Amplifier
Cycle
room
F -13 00 BT
Wor k-out
room
F-2000BT
Dance
HX- 5B
F B -12 0B
studio
TOA Electronics, Inc.
Specifications are subject to change without notice.
www.toaelectronics.com
9000M2-063017 - BH2
Loading...