Toa ST-800 User Manual
ST-800
1
2
3
1
2
3
Input
Shield
Hot
Cold
Output
Shield Hot
Cold
Body earth
MICROPHONE STAND
INSTRUCTION MANUAL
日本語の取扱説明書は裏面をご覧ください。
Thank you for purchasing TOA's Microphone Stand.
Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.
CAUTION
Indicates a potentially hazardous situation which,
if mishandled, could result in moderate or minor
personal injury, and/or property damage.
1. SAFETY PRECAUTIONS
• Avoid installing or mounting the unit in unstable
locations, such as on a rickety table or a slanted
surface. Doing so may result in the unit falling
down and causing personal injury and/or property
damage.
• Do not lay the connection cable where it can be
walked on or tripped over, causing personal injury.
2. GENERAL DESCRIPTION
The ST-800 is a desk-top microphone stand base
designed for use with a gooseneck condenser microphone.
It features compact and stable design.
3. HANDLING PRECAUTIONS
To clean, be sure to first disconnect the connection cable,
then wipe with a dry cloth. When the unit gets very dirty,
use a cloth damped in a neutral cleanser. Never use
benzene, thinner, alcohol, or chemically-treated cleaning
cloth because such volatile liquids could deform or discolor
the unit.
4. CIRCUIT DIAGRAM
133-05-460-20
URL: http://www.toa.jp/
5. APPEARANSE
Traceability Information for Europe (EMC directive 2004/108/EC)
Manufacturer:
TOA Corporation
7-2-1, Minatojima Nakamachi, Chuo-ku, Kobe, Hyogo, Japan
Authorized representative:
TOA Electronics Europe GmbH
Suederstrasse 282, 20537 Hamburg, Germany
To remove the microphone,
press this locking button.
115 (4.53)
Input connector
(XLR-3-31 or equivalent)
40 (1.57)
124 (4.88)
Unit: mm (in)
Weight: 715 g (1.58 lb)
Finish (Main body): Die-cast zinc, black, paint, mat
Output connector
(XLR-3-32 or equivalent)
Loading...