Toa ST-304A User Manual
Thank you for purchasing TOA's Microphone Stand.
Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.
ST-304AMICROPHONE STAND
INSTRUCTION MANUAL
Indicates a potentially hazardous situation which, if mishandled, could
result in moderate or minor personal injury, and/or property damage.
CAUTION
1. SAFETY PRECAUTIONS
• Before installation or use, be sure to carefully read all the instructions in this section for correct and safe
operation.
• Be sure to follow all the precautionary instructions in this section, which contain important warnings and/or
cautions regarding safety.
• After reading, keep this manual handy for future reference.
• Avoid installing the stand in the following locations.
Otherwise, the stand may fall, resulting in personal injury.
· Doorway or other high traffic area where people may trip on the stand.
· Unstable locations, such as on a rickety table or a slanted surface.
· Locations where the unit is exposed to a strong wind.
Important: Even in locations other than the above, if the stand may fall down, take appropriate fall
preventive measures.
2. NOMENCLATURE 3. HOW TO USE A CABLE
CLIP
4. ABOUT A THREAD
ADAPTOR
133-05-464-80
URL: http://www.toa.jp/
Microphone cable
Pipe
Cable clip
U5/16
NS5/8
After putting a microphone cable
in the supplied cable clip, attach
the clip to the pipe.
Removing a thread adaptor
(U5/16) permits installation of
a NS5/8 microphone holder.
Thread adaptor
Pipe
890 – 1530 mm
ø250 mm
Cable clip
(accessory)
Weight: 3.6 kg
Loading...