Toa SR-SA4 User Manual

4. SPECIFICATIONS

Steel plate, white, paint 165 (w) x 175 (h) x 220 (d) mm

1.7 kg (including accessories) ST-32

Hexagon head bolt M5 x 20 with washer ...... 8

Number of Speakers to be Mounted Finish Dimensions Weight Applicable Stand (option) Accessories

Note: The design and specifications are subject to change without

notice for improvement.

For step 3 and 4 below, refer to the instruction manual attached to the ST-32.

Step 1. Remove the screws on both sides of the speaker.

Note: The removed screws are not used.

Step 2. Install the SR-SA4 Stand Adapter to the speaker.

Step 3. Attach the bracket (included in the ST-32) to the

SR-SA4 Stand Adapter.

Step 4. Mount the bracket onto the stand.

3. SPEAKER MOUNTING

Note

When using the ST-32, set the inner pipe to its lowest position.

INSTALLATION MANUAL

STAND ADAPTER

SR-SA4

The SR-SA4 is designed to be used exclusively to mount the SR-S4L or SR-S4S Line Array speaker on the ST-32 Speaker Stand.

1. SAFETY PRECAUTIONS

• Before installation or use, be sure to carefully read all the

instructions in this section for correct and safe operation.

• Be sure to follow all the precautionary instructions in this

section, which contain important warnings and/or cautions regarding safety.

• After reading, keep this manual handy for future reference.

• Do not use other methods than specified to mount the unit.

Extreme force is applied to the unit and the speaker could fall off, possibly resulting in personal injuries.

• Tighten each nut and bolt securely. Ensure that the unit has

no loose joints after installation to prevent accidents that could result in personal injury.

• Use the ST-32 Speaker Stand in combination. Doing

otherwise may cause the unit or component to fall off, resulting in personal injury.

Indicates a potentially hazardous situation which, if mishandled, could result in death or serious personal injury.

WARNING

• Avoid touching the unit's sharp metal edge to prevent injury.

Indicates a potentially hazardous situation which, if mishandled, could result in moderate or minor personal injury, and/or property damage.

CAUTION

Printed in Japan 133-01-443-30

2. SPEAKER MOUNTING VIEW

Speaker

When installing the SR-S4L speaker

SR-S4L

SR-S4S

Screw (4 each on both sides)

Fixing bolt

When installing the SR-S4S speaker

Fixing bolt

Hexagon head bolt M5 x 20 with washer (included in the SR-SA4)

SR-SA4 Stand adapter

Bracket (included in the optional ST-32)

Plain washer (included in the ST-32)

Speaker mounting screw (included in the ST-32)

ST-32 Speaker Stand (optional)