TOA Q-RS180BZ Installation Guide

Q-RS180BZSUBSTATION

INSTALLATION MANUAL

1. GENERAL DESCRIPTION

The Q-RS180BZ is a substation of N-8000 network intercom system designed for Rescue Assistance applications and ADA compliance. It has Emergency and Braille signage, a red mushroom call button, waterresistant buzzer, LED indicator and control output. This substation can be connected with N-8000RS or N8010RS with a 2-core shielded cable.

Warning

This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.

2. CONNECTION

[Connection to the VS-900RS, N-8000RS, N-8010RS (for 25 V line)]

Open collector output: 24 V DC (max.), 30 mA.

[Connection to the external relay]

Thank you for purchasing Substation. Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.

Note: For operation of the units, refer to the N-8000 series operating instructions.

Note: Cut out the control cables if they are not used to avoid short-circuiting.

(VS-900RS, N-8000RS, or N-8010RS)

A B C

Q-RS180BZ

Blue (HOT)

Diode

Relay

Orange

Brown

Black

Call button

External power supply

24 V DC

Speaker/ Microphone

Blue (HOT)

White (COM)

Open collector output

Status indicator

White (COM)

GND

3. MOUNTING

Mount the substation to a 3-gang electrical box mounted to the wall.

Note: The design and specifications are subject to change without notice for improvement.

4. SPECIFICATIONS

[Dimensional diagram]

Accessory screws

The Q-RS180BZ come with 2 types of screws: M4 x 25 and UNC No. 6-32 x 18. For the electrical box provided with unified threads, use the UNC No. 6-32 x 18.

Note

When using the PA paging function, keep the station as far away from the PA paging speaker as possible to avoid acoustic feedback.

Rated Input 1 W Rated Impedance 625 Ω (1 W/ 25 V) Internal Speaker 4 cm cone type Buzzer Water proof type Control Output Open collector, Withstand voltage: 30 V DC, Control current: 30 mA

(The open collector output and the buzzer are kept turned on till the conversation is

finished after the call button was pressed.) Wiring Two-core shielded cable Transmission Range 0.5 km (546 yd)/ ø0.5 mm (AWG24), 0.8 km (874 yd)/ ø0.65 mm (AWG22)

1.3 km (1421 yd)/ ø0.9 mm (AWG19)

Operating Temperature –10 to +50°C (14 ºF to 122 ºF) (Temperature range not to freeze the speaker and switch) Finish Panel: Stainless steel, hairline

Braille: "EMERGENCY PUSH FOR HELP"

"FLASHING: CALL PLACED STEADY: CALL ANSWERED" Call button: Metal (RED Mushroom) Printed circuit board: Weather-resistant coating

Dimensions 115 (W) x 162 (H) x 668.8 (D) mm (4.53" (W) x 6.38" (H) x 2.63" (D)) Weight 700 g (1.54 lb) Accessory Box mounting screw (No.6-32 UNC x 8) ... 4, Box mounting screw (M4 x 25) ... 4 Applicable Box 3-gang electrical box : YC-150 or YS-13A (option)

Q-RS180BZ

Oval head combination screw M4 x 25 (accessory)

Wall surface

YC-150 Back box (option) or 3-gang electrical box

Unit: mm

162

83.5

115

15.75