Toa PJ-200W User Manual
Thank you for purchasing TOA's Projection Speakers.
Please carefully follow the instructions in this manual in order to ensure long, trouble-free use of your equipment.
1. SAFETY PRECAUTIONS
• Before installation or use, be sure to carefully read all the
instructions in this section for correct and safe operation.
• Be sure to follow all the precautionary instructions in this
section, which contain important warnings and/or
cautions regarding safety.
• After reading, keep this manual handy for future
reference.
PJ-100W, PJ-200WPROJECTION SPEAKERS
INSTRUCTION MANUAL
Factory-preset
values
Line Voltage
Imp.
50 V 70 V 100 V
250 Ω 10 W
––
500 Ω 5 W 10 W
–
1 kΩ 2.5 W 5 W 10 W
2 kΩ 1.25 W 2.5 W 5 W
4 kΩ 0.63 W 1.25 W 2.5 W
[PJ-100W]
[PJ-200W]
Detach the black input cable (HOT) and connect it to the
terminal of the desired input impedance/wattage according
to the tables below.
4. IMPEDANCE CHANGE
When changing impedance, follow the procedure below
after unscrewing and removing the cover.
• Install the speaker only in a location that can structurally
support the weight of the speaker and the mounting
bracket. Doing otherwise may result in the speaker falling
down and causing personal injury and/or property damage.
• Do not stand or sit on, nor hang down from the speaker
as this may cause it to drop, resulting in personal injury
and/or property damage.
• Do not operate the speaker for an extended period of
time with the sound distorting. This is an indication of a
malfunction, which in turn can cause heat to generate
and result in a fire.
2. GENERAL DESCRIPTION
The PJ-100W and PJ-200W Projection Speakers are
designed for indoor use. The built-in terminal board
provides an easy cable connection and allows bridge
wiring. Its wide frequency range makes it suitable for use
in both paging and BGM applications.
3. FEATURES
• Maximum input: 15 W (PJ-100W), 30 W (PJ-200W).
• Built-in transformer for 50 V, 70 V and 100 V speaker
line.
• Two grommets for parallel (bridge) connection.
WARNING
Indicates a potentially hazardous situation which,
if mishandled, could result in death or serious
personal injury.
CAUTION
Indicates a potentially hazardous situation which,
if mishandled, could result in moderate or minor
personal injury, and/or property damage.
Factory-preset
values
Line Voltage
Imp.
50 V 70 V 100 V
125 Ω 20 W
––
250 Ω 10 W 20 W
–
500 Ω 5 W 10 W 20 W
1 kΩ 2.5 W 5 W 10 W
2 kΩ 1.25 W 2.5 W 5 W
Note: The black input cable has been connected to the
terminal of 1 kΩ impedance for the PJ-100W and
500 Ω for the PJ-200W.
Cabinet
Grommet B
Cover
Screws
Bracket
Grommet A
Cable clump A
Speaker cable
Speaker cable
COM
Grommet A
Black input cable (HOT)
Terminal board
[Back side view of cover removed]
8. SPECIFICATIONS
Note: The design and specifications are subject to change without notice for improvement.
7. WIRING DIAGRAMS5. BRIDGE CONNECTION
Route the speaker cable through grommet B and clump it
with a cable clump B as illustrated below.
533-06-004-9A
URL: http://www.toa.jp/
Rated Input 10 W (50 V, 70 V, 100 V Line)
Input Impedance 100 V Line : 1 kΩ (10 W), 2 kΩ (5 W), 4 kΩ (2.5 W)
70 V Line : 500 Ω (10 W), 1 kΩ (5 W), 2 kΩ (2.5 W), 4 kΩ (1.25 W)
50 V Line : 250 Ω (10 W), 500 Ω (5 W), 1 kΩ (2.5 W), 2 kΩ (1.25 W), 4 kΩ (0.63 W)
Preset Impedance 1 kΩ
Sound Pressure Level 92 dB (1 m, 1 W) at 1 kHz
Speaker Diameter 12 cm (5")
Frequency Range 65 Hz – 15 kHz
Finish Cabinet, Cover : ABS resin, off-white
Bracket : SPCC, off-white
Dimensions 160 (w) x 200 (h) x 195 (d) mm (6.3" x 7.87" x 7.68")
Weight 1.8 kg (3.97 lb)
Rated Input 20 W (50 V, 70 V, 100 V Line)
Input Impedance 100 V Line : 500 Ω (20 W), 1 kΩ (10 W), 2 kΩ (5 W)
70 V Line : 250 Ω (20 W), 500 Ω (10 W), 1 kΩ (5 W), 2 kΩ (2.5 W)
50 V Line : 125 Ω (20 W), 250 Ω (10 W), 500 Ω (5 W), 1 kΩ (2.5 W), 2 kΩ (1.25 W)
Preset Impedance 500 Ω
Sound Pressure Level 95 dB (1 m, 1 W) at 1 kHz
Speaker Diameter 16 cm (6.5")
Frequency Range 50 Hz – 20 kHz
Finish Cabinet, Cover : ABS resin, off-white
Bracket : SPCC, off-white
Dimensions 200 (w) x 255 (h) x 250 (d) mm (7.87" x 10.04" x 9.84")
Weight 2.5 kg (5.51 lb)
[PJ-100W]
[PJ-200W]
Traceability Information for Europe (EMC directive 2004/108/EC)
Manufacturer:
TOA Corporation
7-2-1, Minatojima Nakamachi, Chuo-ku, Kobe, Hyogo, Japan
Authorized representative:
TOA Electronics Europe GmbH
Suederstrasse 282, 20537 Hamburg,Germany
[PJ-100W]
[PJ-200W]
6. SPEAKER MOUNTING DIMENSIONS
Unit: mm (in)
Cable for parallel connection
(not supplied)
Speaker cable
Grommet A
Factory preset
Cable clump A Cable clump B
(COM)
Grommet B
(HOT)
Terminal board
[Back side view of cover removed]
51 (2.01) 51 (2.01)
11 x 20 (0.43 x 0.79)
2-ø11 (2-ø0.43)
8 Ω
0
8 Ω
0
4 kΩ
2 kΩ
1 kΩ
500 Ω
250 Ω
COM
(Factory-preset values)
2 kΩ
1 kΩ
500 Ω
250 Ω
125 Ω
COM
(Factory-preset values)
100 V Line
Black
White
100 V Line
Black
White
70 V Line
50 V Line
70 V Line
50 V Line
Loading...