Toa PC-2268WP User Manual

INSTRUCTION MANUAL

Thank you for purchasing TOA Splash-proof Ceiling Speaker.
Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.

TABLE OF CONTENTS

SPLASH-PROOF CEILING SPEAKER

PC-2268WP

1. SAFETY PRECAUTIONS .................................................. 2

2. GENERAL DESCRIPTION AND FEATURES ................... 4

3. NOMENCLATURE ............................................................ 4

4. INSTALLATION

4.1. Installation Precautions ............................................... 5

4.2. Before Installation ....................................................... 5

4.3. Installation procedure ................................................. 6

4.4. Removing the Front Case ......................................... 11

5. WIRING DIAGRAM ......................................................... 12

6. SPECIFICATIONS ........................................................... 12

Accessories ..................................................................... 12

Speaker

Knob nuts
(accessory)

Speaker mounting panel
(accessory)

2

When Installing the Unit

• Refer all installation work to the dealer from whom the speaker was purchased. Installation work requires
extensive technical knowledge and experience. The speaker may fall off if incorrectly installed, resulting in
possible personal injury.

• Install the speaker only in a location that can structurally support the full weight of the unit and mounting
bracket. Doing otherwise may result in the speaker falling down and causing personal injury and/or property
damage.

• Do not use other methods than specified to install the speaker. Extreme force is applied to the speaker and
the speaker could fall off, possibly resulting in personal injuries.

• Attach the safety wire to the speaker. If not attached, the speaker could fall off, resulting in personal injury.

• Use screws that are appropriate for the ceiling's material and structure. Failure to do so may cause the
speaker to fall, resulting in material damage and possible personal injury.

• Ensure that all screws are securely tightened. If they are loose after installation, the speaker could fall down,
possibly resulting in personal injury.

• Do not mount the speaker in locations exposed to constant vibration. The speaker or its mounts can be
damaged by excessive vibration, potentially causing the speaker to fall, which could result in personal injury.

• Avoid installing the speaker near seaside or in locations exposed to corrosive gas. The speaker or its parts
may be subject to corrosion, that might cause it to fall or result in personal injury.

• Do not install the speaker in indoor swimming pools or such locations where liquid chemicals are used. The
parts deteriorate if corroded, causing the speaker to fall, which could result in personal injury.

• Do not install the speaker in kitchens or such locations where grease or oily smoke is generated. Failure to
follow this instruction could deteriorate the speaker mounting parts, causing the speaker to fall, which could
result in personal injury.

When the Unit is in Use

• If any of the following irregularities occurs, immediately switch off the amplifier's power, and inform the shop
from where the speaker was purchased. Further using the speaker may result in fire or electric shock.

· If you detect smoke or a strange smell coming from the speaker

· If water or any metallic object gets into the speaker

· If the speaker falls, or the speaker case breaks

• To prevent a fire or electric shock, never open nor remove the speaker case. Refer all servicing to your
nearest TOA dealer.

1. SAFETY PRECAUTIONS

• Before installation or use, be sure to carefully read all the instructions in this section for correct and safe
operation.

• Be sure to follow all the precautionary instructions in this section, which contain important warnings and/or
cautions regarding safety.

• After reading, keep this manual handy for future reference.

Safety Symbol and Message Conventions

Safety symbols and messages described below are used in this manual to prevent bodily injury and property
damage which could result from mishandling. Before operating your product, read this manual first and
understand the safety symbols and messages so you are thoroughly aware of the potential safety hazards.

Indicates a potentially hazardous situation which, if mishandled, could
result in death or serious personal injury.

WARNING

3

When Installing the Unit

• To avoid electric shocks, be sure to switch off the amplifier's power when connecting speakers.

• The speaker front and rear cases are secured with adhesive tape (2 points) at both sides when shipped from
the factory. Remove the tapes while placing the speaker on a stable surface or while supporting it with hand.
Failure to do so may cause the case to fall, resulting in material damage and possible personal injury.

When the Unit is in Use

• Do not operate the speaker for an extended period of time with the sound distorting. Doing so may cause the
speaker to heat, resulting in a fire.

• Do not stand or sit on, nor hang down from the speaker as this may cause it to fall down or drop, resulting in
personal injury and/or property damage.

• Have the speaker checked periodically by the shop from where it was purchased. Failure to do so may result
in corrosion or damage to the speaker or the mounts that could cause it to fall, possibly causing personal
injury.

Indicates a potentially hazardous situation which, if mishandled, could
result in moderate or minor personal injury, and/or property damage.

CAUTION

4

2. GENERAL DESCRIPTION AND FEATURES

The PC-2268WP is a splash-proof surface mount ceiling speaker with rated input of 6 W (100 V line
application).
It meets IPX4 water protection requirements and can be installed in locations where it may not be directly
exposed to wind and rain.

• Compact and attractive design to blend in with interior spaces.

• Rear-closed structure with a rear cover keeps performance and sound quality constant regardless of

installation location.

• The push-in type input terminal provides an easy cable connection and allows bridge wiring.

• The input power change can be made easily by changing the tap position of the transformer.

3. NOMENCLATURE

[Inside the rear case]

Cable entry opening
(ø30 mm)

Input terminal

Intermediate connector

Positioning mark ( )

[Side]

Reinforcement bracket

Knockout holes

Note

Open these holes when the cable
entry opening in the center of the rear
case cannot be used at installation.

Lock lever

Rear case

Front case

Positioning mark ( )

[Inside the front case]

Safety wire

Speaker unit

Matching transformer

Intermediate connector