User’s Manual
Network Control Input Unit IP-1000CI
Thanks for your purchase of TOA products IP-1000 series.
Please read the manual carefully to ensure the machine operating in long time and fault-free.
TOA Corporation
Chapter 1
Safety precaution
Chapter 1: safety precaution
Please abide by the warning and t he r elevant safety tips.
Please take this manu al i n convenient place after you reading the guide for futur e r eference.
Warning
The sign means there is potent i al saf et y hazard, when operate wron g m ay result in death or
serious injury.
The sign is used to remind the user that attached is the important operation and
maintenance data.
（1）Avoid getti ng t he device wet.
Do not make th e m ac hi ne wet or expose to rain water or other liquid contamination of the environment, or
lead to fire or get an electric shock.
（2）Do not use unspecified volt age.
Using the marked voltage on the machine.
Using more than the logo of voltage could lead t o fir e or shock.
（3）Do not scratch the power cord.
Do not scratch the power cord or cut it.
Simultaneously, keep the power line far way from heated objects, put heavy things on it will lead to fires or
electric shock.
Using machine
（1）In case of the anomalies
Please turn off the power supply immediately when finding the abnormal phenomena, please connect with
the agency. If you continue t o us in g the equipment, it is likely to catch on fire or resulted in electric shock.
·The smoke or smell of the machine.
·The inside of the machine is floo ded by water or external intrusion.
·Machine falling or machine case damage.
·The power cord damage ( w ire cor e is exposed of broken, etc)
·Malfunction (e.g. no network conn ection, no sound etc.)
（2）Do not open the machin e internal or modify the machine.
Do not external subst ance getting into the equipment.
Please do not put any metallic or inflammable objects into the machine, otherwise it may cause fires or
electric shock.
（3）Please do not touch it during thundering
To avoid electr i c shock, please do not touch the mac hin e and t he plug during lightni ng, et c .
（4）Please do not place containers with liquid or small metal objects on the machine above.
If containers drop an d l iquid get into to the machine that will likely catch fires or cause electric shock.
（5）Do not open the machin e internal or modify the machine.
The machine internal cont ains high v olt age par t s, on ce open the cov er or modi fy t he machine, it may resul t
in fires or cause shock. All the maintenance and other machine modification should be operated by
professional personne l.
（6）Maintenance and the precautions for not using in a long time.
While maintenance, if the machine is not been used for 10 days or more, please turn off power supply
switch for safety. If do not co mp ly with this provision, it will likely c ause electric shock or fires.
1-1
Chapter 2
Products description
Chapter 2: produc ts description
2.1Summary
2.1Summary
IP-100CI is an IP control input unit, which is used for receiving alarm signal from fire center and trigger to
broadcasting warning announcement.
High speed industrial grad e dicaryon ARM+DSP chip, starting time ≤3s.
32 alarm input interfaces, 8 shor t circuit output interfaces.
Using any network control input unit to extend the interface of the system.
Automatically sending alarm signal to the server and executing broadcasting task (support one zone/ all
zones alarm).
Alarm sound files are pre-recorded in the server, without “the alarm generator" is ok.
Accessing to the Ethernet, and it is supporting crossi ng net work segment and router.
2-1
2.2 Interface descripti o n
2.2.1 Front view
① POWER: power switch and power indicator light.
Chapter 2: products description
2.2 Interface description
2-2
2.2.2 Rear view
1、2：Alarm out 1
①DATA PORT: data upgrade int er fa ce, it ’s used for firmware upgr ade.
②LAN：RJ45 network interface, and it connect with Ethernet switch.
③Alarm output terminal: provide 8-way switching value (Stem node) signal, the interface is normally
open contact, the contact capacity is DC24V/1A.
Chapter 2: products description
2.2 Interface description
9、10：Alarm out 5
3、4:Alarm out 2 11、12:Alarm out 6
5、6:Alarm out 3 13、14:Alarm out 7
7、8: Alarm out 4 15、16:Alarm out 8
④Alarm input terminal: provide 32-way alarm signal input ,the interface can be setting as switching
value input/ voltage input by the “INPUT SWITCH”, when it pill to “SHORT CIRCUIT IN” is switching
value input; When pull to “24DC” is voltage input, the cont r ol voltage range is DC12V~DC24V.
1-4: Alarm input 1-4 17-20: Alarm input 17-20
5-8: Alarm input 5-8 21-24:Alarm input 21-24
9-12: Al arm input 9-12 25-28: Alarm input 25-28
13-16: Alarm input 13-16 29-32: Alarm input 29-32
C: Negative terminal of com m on por t / voltage input
⑤Change-over switch: to control the alarm input terminal, it can directly converting between the
switching value and voltage input .
⑥220AC IN: power input inter face, suitable voltage range is AC185~260V/50HZ.
⑦GND port
2-3
Chapter 3
Wiring
3.1 IP-1000CI Wiring diagram
Chapter 3: wiring
3.1 Wiring
3-1
3.2 Reference size (unit: mm)
Chapter 3: wiring
3.2 Reference size
3-2
Chapter 4
Operating description
Chapter 4: operating description
4.1 Fire alarm
4.1 Fire alarm
After adding the fire alarm task in the server, and after the task was triggered, it will automatically broadc ast
the specified audio program by server.
Please add the fire alarm task to the server according to the following steps.
4-1
Chapter 5
Appendix
5.1.1 Network C ont rol Input Unit IP-1000CI
Model number
IP
Suitable voltage
AC185V～260V
Suitable m a ins frequency
50～60Hz
Functional unit
Alarm output
Alarm input
Power input
Da
Network input
Network protocol
TCP/IP、UDP、ARP、ICMP、IGMP protocol
Network chip rate
10/100Mbps self
Color
Black
accessories
4P connecting terminals(4PCS)
5P connecting terminals (8PCS)
Power line （3*1.0mm2/1.5m
1PC）
Chapter 5: appendix
5.1Specification
terminal
-1000CI
terminal
terminal
terminal
ta upgrade terminal
terminal
-adaption
）（
5-1
TOA Corporation 201611
Loading...