TOA H-2WP EX, H-2 EX Instructions
OPERATING INSTRUCTIONS
SPEAKER SYSTEMS
Please follow the instructions in this manual to obtain the optimum results from this unit.
We also recommend that you keep this manual handy for future reference.
H-2
H-2WP
TABLE OF CONTENTS
1. SAFETY PRECAUTIONS .................................................................................... 2
2. GENERAL DESCRIPTION .................................................................................. 3
3. FEATURES ............................................................................................................... 3
4. NOMENCLATURE ................................................................................................. 4
5. INSTALLATION
5.1. Direct Wall/Ceiling Mounting ................................................................................. 5
5.2. Mounting the Speaker Using an Electrical Box ..................................................... 8
5.3. Mounting the Speaker Using Supporting Rails ..................................................... 8
5.4. Removing the Front Grille ..................................................................................... 8
6. OUTDOOR USE (H-2WP ONLY)
6.1. Waterproofing ....................................................................................................... 9
6.2. Speaker Mounting Angle ....................................................................................... 9
7. REPAINTING THE GRILLE ................................................................................. 9
8. PROTECTION CIRCUITRY INFORMATION ............................................... 10
9. EQUALIZATION .................................................................................................... 10
10. SPECIFICATIONS ................................................................................................ 11
Accessories ................................................................................................................ 11
2
1. SAFETY PRECAUTIONS
• Before installation or use, be sure to carefully read all the instructions in this section for correct and safe
operation.
• Be sure to follow all the precautionary instructions in this section, which contain important warnings and/or
cautions regarding safety.
• After reading, keep this manual handy for future reference.
Safety Symbol and Message Conventions
Safety symbols and messages described below are used in this manual to prevent bodily injury and property
damage which could result from mishandling. Before operating your product, read this manual first and
understand the safety symbols and messages so you are thoroughly aware of the potential safety hazards.
• Install the unit only in a location that can
structurally support the weight of the unit and the
mounting bracket. Doing otherwise may result in
the unit falling down and causing personal injury
and/or property damage.
• Use nuts and bolts that are appropriate for the
ceiling's or wall's material and structure. Tighten
each nut and bolt securely. Ensure that the bracket
has no loose joints after installation to prevent
accidents that could result in personal injury.
• (Applicable to H-2 only)
Since the unit is designed for in-door use, do not
install it outdoors. If installed outdoors, the aging of
parts causes the unit to fall off, resulting in
personal injury. Also, when it gets wet with rain,
there is a danger of electric shock.
• Do not apply lubricant and rust inhibitor. If it
contacts resin or rubber parts, they could
deteriorate and cause the unit to fall, possibly
resulting in personal injury.
• (Applicable to H-2WP only)
Avoid installing the unit in locations close to the
seashore, or in indoor swimming pools or
bathrooms. In such locations, the bracket may be
vulnerable to corrosion, eventually allowing the
unit to fall resulting in personal injury.
• Avoid touching the unit's sharp metal edge to
prevent injury.
• Do not operate the unit for an extended period of
time with the sound distorting. This is an indication
of a malfunction, which in turn can cause heat to
generate and result in fire.
WARNING
Indicates a potentially hazardous situation which, if mishandled, could
result in death or serious personal injury.
Indicates a potentially hazardous situation which, if mishandled, could
result in moderate or minor personal injury, and/or property damage.
WARNING
CAUTION
CAUTION
3
2. GENERAL DESCRIPTION
TOA's H-2 and H-2WP are small, dome-shaped 2-way speakers featuring high sound quality. The H-2 is
designed for indoor use, and the H-2WP is designed for outdoor use.
Note: Protect the H-2WP from rain when installing. (Refer to P. 9 "6.1. Waterproofing".)
3. FEATURES
• The speaker’s smooth curved surface allows it to blend in with the interiors of most modern buildings.
• A 10 cm woofer featuring high input capacity produces powerful low frequency sound despite its small size.
• The one-inch balanced dome tweeter features ferro-fluid to ensure superb transient response characteristics
for clear, high frequency sound output and high power-handling capabilities.
• The speaker's built-in crossover network circuitry features sharp cut-off characteristics that realize uniform
energy radiation while suppressing unwanted input signals to the woofer or tweeter.
• The speaker is designed with an emphasis on installation ease and safety, as well as easier conduit wiring
when an electrical box is installed.
• The speaker's round mounting base frame allows the speaker to be installed at any mounting angle.
Note: When mounting the H-2WP speaker to a wall, to ensure its watertightness it must not be tilted any
more than 45 degrees up from its downward-facing position.
• A built-in matching transformer permits the speaker to be used for both high- and low-impedance
applications. For low-impedance applications, either the 4 Ω or 16 Ω terminal can be selected. Impedance
can be easily changed from outside the unit.
• Detachable screw terminals facilitate connection. Dual positive and negative terminals also facilitate bridge
connections.
• The H-2's enclosure and front grille are made of fire-resistant ABS (UL Standard 94: V-0 Grade).
• The structure of the speaker's front grille is specially designed for ease of refinishing and repainting.
4
111
φ268
Front grille (grille frame)
Anti-slip piece
Aiming marker
Lock tab
Detachable input connector
Connector for impedance selection
Front grille (Grille)
5.6
76.4 (3")
φ21.6
φ181
69.9
(2
3
/4")
88.9 (3 1/2")
(For mounting to
an electrical box)
(For mounting to
a wall, ceiling or
supporting rail)
(For mounting to
an electrical box)
83.3 (3 9/32")
(For mounting
to an electrical
box)
4. NOMENCLATURE
• Accessory (Base frame)
[Front Panel]
[Side Panel]
[Side Panel]
[Rear Panel]
[Installation Example]
Unit: mm
Loading...