High Ceiling Speaker
Uniform Directivity Ceiling Speaker
AC-120 Dedicated Equalizer
DESCRIPTION
Two new speaker systems from TOA provide extensive
sound coverage for a variety of sound applications.
The F-101C/F-101 CM High Ceiling Speaker is designed to
provide full-range sound in areas with high ceilings at a low
cost.
The F-121 C/F-121 CM Uniform Directivity Ceiling Speaker
System is designed to provide a much wider dispersion
angle than standard ceiling speakers. Conventional 4" or 8"
ceiling mounted speakers have a severe sound quality and
intelligibility drop off outside the area directly underneath
the speaker.
Ceiling Speaker is equipped with a specially designed
sound diffuser, housed in a mesh cone, and uses the AC120 Dedicated Equalizer that ensures optimal frequency
response. The F-121CM is transformer equipped with mul-
tiple line taps for loudness selection. This speaker provides
higher sound quality for low ceiling mounted speaker installations in public spaces, restaurants, offices, or shopping
malls while requiring fewer units.
The F-121 C/F-121 CM Uniform Directivity
TOA
FEATURES
F-101 C/CM High Ceiling Speaker
◆ 80Hz to 18,000 Hz (-10dB) frequency response for
smooth sound.
◆
Powerful 40 watts power handling capacity.
◆ Built-in circuitry automatically activates to alleviate
low/mid frequency excessive input damage.
◆
Self aligning support flange for easy, screw-in installation.
◆ 100/70V line matching transformer for high
impedance applications.
◆
Tuned, ported, bass-reflex type enclosure.
◆
Convenient 24" safety cable with spring clip.
F-121 C/F-121 CM Uniform Directivity Ceiling Speaker
◆
Can be used with AC-120 Dedicated Equalizer.
◆
Housed speaker diffuser designed to expand high
frequency dispersion.
◆
Self aligning support flange for easy, screw-in installation.
◆ Non-conducting grille to prevent dust or discolorization
from static electricity buildup.
◆ Built-in circuitry automatically activates to alleviate
low/mid frequency excessive input damage.
◆ 100/70V line matching transformer for high
impedance applications.
◆
Tuned, ported, bass-reflex type enclosure.
◆
Convenient 24" safety cable with spring clip.
AC-120 Dedicated Equalizer
◆
Built-in equalization filtering provides even sound quality bal-
ance and wide-area intelligibility for F-121 C/F-121 CM.
◆
Low cut switch removes low frequencies during announcements.
◆
Built-in 100Hz, 12dB/octave crossover for use when
F-121/F-121 CM is used with a FB-10 subwoofer.
Page 2
F-101C/F-101CM
High Ceiling Speaker
SPECIFICATIONS
Model Number F-1O1C
Enclosure
Speaker
Nominal Impedance 8 ohms
Sensitivity
Frequency Response 80-18,000Hz (-10dB)
Power Handling
Capacity
Finish
Weight
Dimensions
Model Number F-101 CM
Enclosure
Speaker
Rated Input
(Impedance)5W (2k
Sensitivity
Frequency Response
Finish
Weight
Dimensions
Bass-reflex type
Full-range, 4.7" cone speaker
90dB (1W/1m)
Continuous Pink Noise: 40W
Continuous Program: 120W
Enclosure: Black
Front Grille: Off-white
5.5 Ibs.
Front Grille: 10.24" in diameter
Ceiling Hole: 8.58" in diameter
Ceiling Space: Over 6.3" max in height
Mountable ceiling tile thickness: .2"-1.4"
Bass-reflex type
Full-range, 4.7" cone speaker
100V taps at line: 20W (500W), 10W (1k
Ω),
3W (3.3k
70V: 20W (250
3W (1.7kΩ), 1W (5k
90dB (1W/1m)
80-18000Hz (-10dB)
Enclosure: Black
Front Grille: Off-white
6.2 Ibs.
Front Grille: 10.24" in diameter
Ceiling Hole: 8.58" in diameter
Ceiling Space: Over 6.3" max in height
Mountable ceiling tile thickness: .2"-1.4"
Ω),
Ω),
10W (500
1W (10
Ω),
Ω)
Ω)
5W (1k
Ω)
Ω),
APPEARANCE AND DIMENSIONAL DIAGRAM
*F-101C and F-121C transformer not included
F-101C/F-101 CM POLAR RESPONSE
OVERLOAD PROTECTION
To prevent damage from excessive low frequencies, the
F101C has a built-in overload protection circuit. During operation, if the overload circuit senses excessive low frequency,
it will attenuate the low frequency output of the speaker.
Once activated, the protection circuit will reset in approximately 10 seconds after turning the system volume down to
prevent reoccurrence.
ARCHITECT’S AND ENGINEER’S
SPECIFICATIONS
The speaker shall be the compactly designed TOA bass-reflex
full-range ceiling mount speaker, the F1O1C at 8 ohms low
impedance/F-101 CM with 70V/100V high impedance line
transformer. The speaker shall provide smooth frequency
response and high power handling capacity.
The F-101C/F-101 CM shall have a ceiling mount assembly
incorporating a 4.7" full-range speaker. Sensitivity shall be
90dB (1W, 1m) with a frequency response of 80Hz to
18,000Hz (-10dB).
Power handling capacity for the F-101C 8Ω impedance unit
shall be 40W continuous pink noise or 120W continuous program.
The F-101 C/F-101 CM shall have 5 transformer taps. The taps
shall be 20W, 10W, 5W, 3W and 1W. The F-101C also shall
have a built-in protective circuit that prevents low-mid frequency overload by reducing only the low-mid frequency signals.
The enclosure shall be a tuned, ported, bass-reflex type molded from a flame-resistant polymer. It shall incorporate four
spring swing arms and two spring-loaded clips to facilitate
easy installation of both the enclosure and front grille, respectively. It shall include a 24" safety cable with spring clip for
easy anchoring to support structure. It shall also accommodate separately supplied T-bars and is sized to fit inside an
appropriate metal back can, if desired.
The finish shall consist of an off-white front grille. Front grille
dimensions shall be 10.24" outer diameter. The ceiling hole
shall be 8.58" in diameter.
Required ceiling space shall be at least 6.30" in height, and
ceiling tile thickness shall range from .02"-1.4".
The assembly’s weight shall not be more than 5.5 Ibs. for the
F-101C and 6.2 Ibs. for the F-101CM with a transformer.
5.6 Ibs.
Front Grille: 10.24" in diameter
Ceiling Hole: 8.58" in diameter
Ceiling Space: Over 6.3" max in height
Mountable ceiling tile thickness: .2"-1.4"
70V: 20W (250
3W (1.7kΩ), 1W (5k
90dB (1W/1m)
80-18000Hz (-10dB) (70-18,000 Hz w/AC-120)
Enclosure: Black
Front Grille: Off-white
6.2 Ibs.
Front Grille: 10.24" in diameter
Ceiling Hole: 8.58" in diameter
Ceiling Space: Over 6.3" max in height
Mountable ceiling tile thickness: .2"-1.4"
Ω)
, 10W
Ω)
(500Ω) ,
Ω)
5W (1k
Ω)
Ω)
,
APPEARANCE AND DIMENSIONAL DIAGRAM
*F-101C and F-121C transformer not included
F-121C/F121 CM POLAR RESPONSE
OVERLOAD PROTECTION
To prevent damage from excessive low frequencies, the
F121C has a built-in overload protection circuit. During operation, if the overload circuit senses excessive low frequency,
it will attenuate the low frequency output of the speaker.
Once activated, the protection circuit will reset in approximately 10 seconds after turning the system volume down to
prevent reoccurrence.
ARCHITECT’S AND ENGINEER’S
SPECIFICATIONS
The speaker shall be the compactly designed TOA bassreflex, wide-dispersion, ceiling mount speaker, the F121C at 8
ohms low impedance/F-121 CM with 70V/100V high impedance line transformer. The speaker shall provide smooth frequency response, high power handling capacity, and, due to
the unique diffuser incorporated into the grille, extremely wide
high frequency dispersion.
The F-121 C/F-121 CM shall have a ceiling mount assembly
incorporating a 4.7" full-range speaker. Sensitivity shall be
90dB (1W, 1m) with a frequency response of 80Hz to
18,000Hz (-10dB).
Power handling capacity for the F-121C/F-121CM 8
shall be 40W continuous pink noise or 120W continuous program.
The transformer taps on the F-121 C/F-121 CM shall be 20W,
10W, 5W ,3W and 1W. The F-121C also shall have a built-in
protective circuit that prevents low-mid frequency overload by
reducing only the low-mid frequency signals.
The enclosure shall be a tuned, ported, bass-reflex type mold-
ed from a flame-resistant polymer. It shall incorporate four
spring-loaded clips to facilitate easy installation of both the
enclosure and front grille, respectively. It shall include a 24"
safety cable with spring clip for easy anchoring to support
structure. It shall also be sized to accommodated mounting
within a separately supplied standard metal back can if
desired.
The 10.24" diameter ceiling grille/diffuser shall have a nonconducting off-white finish to prevent discoloration or dust
build-up due to static.
The bass-reflex enclosure shall mount in ceiling tiles up to 1.4"
and shall not extend above the tile more than 6.3". The
assembly’s weight shall not be more than 5.6 Ibs for the
F-121C or 6.2 Ibs. for the F-121 CM with a transformer.
Ω
unit
F-121C/F121CM FREQUENCY RESPONSE
F-121C/F121CM FREQUENCY RESPONSE
Page 4
AC-120 Equalizer
SPECIFICATIONS
Model Number AC-120
Power Requirements
Power Consumption
Distortion
Hum & Noise
Channel Input
Channel Output
Low Frequency
Output
Low cut
Finish
Weight
Dimensions
*odB=0.775V RMS
**Specifications are subject to change without notice
AC Mains, 50/60Hz
9W
Less than 0.05% (+4B*, 1kHz)
Less than -94dB* (20Hz-20kHz)
Nominal Input Level: +4dB*, 10K
balanced, 1/4" jack
Max Output Level: +20dB*
Nominal Output Level: +4dB*, 600K
electronically balanced, 1/4” jack
Max Output Level: +20dB*
Filter Cutoff Frequency: 100Hz, 12db/oct
Nominal Output Level: +4dB*, 600K
electronically balanced, 1/4" jack
Max Output Level: +20dB*
Filter Cutoff Frequency: 100Hz, 12dB/oct
100Hz, 6dB cut (only with F-121C)
Panel: Aluminum in Black
8.2 Ibs.
19"(W) x 1.37"(H) x 11.71"(D)
Ω,
electronically
Ω,
Ω
APPEARANCE AND DIMENSIONAL DIAGRAM
BLOCK DIAGRAM
TOA
Printed in U.S.A. 4/97 BL
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.