TOA DP-K1 CU Specifications
DIGITAL AUDIO PROCESSOR
DP-K1
DESCRIPTION
The TOA DP-K1 is an easy-to-operate digital audio
processor equipped with gain, equalizer, crossover,
compressor, noise gate, matrix, delay and Automatic
Resonance Control functions. The advanced new Automatic
Resonance Control (ARC) function enables the DP-K1 to
automatically measure and process the acoustic response
characteristics of complex environments and provide
compensatory parameter settings to improve speech
intelligibility and sound quality. This latest addition to the TOA
line of digital audio processors makes it easy to bring optimal
sound enhancement even to acoustically challenging venues
such as houses of worship, sports facilities, convention
centers, airports, and many other venues. The DP-K1's
modular design supports up to eight mic/line inputs and eight
line outputs with flexible contact-closure remote control.
FEATURES
●
Advanced new Automatic Resonance Control (ARC)
function improves system intelligibility.
• The ARC function automatically measures frequency
characteristics of the broadcast area and finds resonant
frequencies.
•Automatically creates a filter curve that curbs unwanted
resonant frequencies for the measured room response.
•Improves speech intelligibility and sound quality in facilities with
challenging acoustic environments.
• Room mode compensation
• Unlike earlier, time-consuming manual adjustment methods that
required electroacoustic engineers, operation is quick and easy.
• Fully comprehensive operating capability means no dedicated
device is required
●
Digital audio processor has built-in rack-mount brackets (3
RU, EIA standard 19 inch rack mount width) for
commercial sound applications such as houses of
worship, sports facilities, convention centers, airports, and
many others.
●
Cost-effective modular design — up to 8 inputs and 8
outputs
• Users can choose from among a variety of optional modules.
●
Up to 16 different user-created combination configurations
are possible.
●
Built-in gain, equalizer, crossover, compressor, noise gate,
matrix and delay audio processor functions
●
Eight bus matrix allows flexible input-to-output signal
routing for zoning or room combining.
●
PC software for offsite programming and settings
●
Network interface for remote programming and
maintenance
●
Network ports are available on both front and rear panels.
●
8 internal memories for storage and recall of different
signal routing and parameter configurations.
●
Preset knob-lock function prevents accidental errors during
operation.
●
Input and output channel indicators
●
Cooling fan ensures continuous, reliable operation.
DP-K1
DIGITAL AUDIO PROCESSOR
APPEARANCE AND
DIMENSIONAL DIAGRAM
Rear View
482.6
466
420
57.3
132.6
Modules
Modular design allows you to configure the most costeffective design for each application.
TOA offers a range
of modules to suit
a variety of input and
output requirements.
Mic/Line Input Modules
Monaural type
A/D
Converter
24 bit
20 bit
D-921F
2-Channel input module for mic
and line inputs (selectable) with
XLR connectors, adjustable
input sensitivity, and phantom
power.
D-922F
2-Channel input module for
mic and line inputs (selectable)
with XLR connectors and DIP
switches for input sensitivity,
phantom power and ground lift.
XLR Connector
D-921E
2-Channel input module for mic
and line level inputs
(selectable) with removable
terminal block connectors,
adjustable input sensitivity and
phantom power.
D-922E
2-Channel input module for mic
and line level inputs (selectable)
with removable terminal block
connectors, input sensitivity
DIP switches, phantom power
and ground lift.
Removable Terminal
Block Connector
Front View
320
Side View
Stereo type
D-936R
4 stereo input
module equipped
with standard RCA
jacks. This module
features two stereo
transmission
mode:
1) Selection of one
of the four stereo inputs.
2) Mixing of all four stereo inputs,
transmitting the mixed signal to the
D-901 though left/right channel
outputs.
37.7
Digital Input Modules
Applicable AES/EBU Format
D-923AE
2-Channel digital input module. With
the use of this module, digital signals
can be input, permitting direct
connection of the D-901 to equipment
having a digital output. Owing to the
built-in sample rate converter, the
module can handle signals of various
sampling frequencies.
Applicable S/PDIF Format
D-937SP
Single channel stereo digital input
module. With the use of this module,
digital signals can be input, permitting
direct connection of the D-901 to
equipment having a digital output.
Owing to the built-in sample rate
converter, the module can handle
signals of various sampling frequencies.
Loading...