Toa D-2012AS User Manual

Thank you for purchasing TOA's Console Case. Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.

D-2012ASCONSOLE CASE

ASSEMBLING MANUAL

Indicates a potentially hazardous situation which, if mishandled, could result in moderate or minor personal injury, and/or property damage.

CAUTION

1. SAFETY PRECAUTIONS

Be sure to follow all the precautionary instructions in this section, which contain important cautions regarding safety. After reading, keep this manual handy for future reference.

• Avoid touching the decorative panel's sharp metal edge to prevent injury.

2. GENERAL DESCRIPTION

The D-2012AS Console Case is a desk mount kit for the D-2012C Remote Console Unit, which includes an armrest, side and decorative panels.

3. COMPONENT PARTS

4. HOW TO ASSEMBLE

Step 1. Remove 3 screws on each side of

the D-2012C to detach the rack mounting brackets. The r emove d sc r e ws a r e no t used.

Machine screw M4 x 10:

Side panel L

Side panel R

Decorative panels

Armrest

4 pieces

Machine screw M4 x 25 (with washer): 11 pieces

Rubber foot: 4 pieces

D-2012C

Rack mounting bracket

5. SPECIFICATIONS

Note: The design and specifications are subject to change without notice for improvement.

Finish Side panels: MDF, paint, black, mat finish

Armrest: MDF, leather upholstery, black, mat finish

Decorative panels: Stainless steel, silver Dimensions 505 (w) x 127.5 (h) x 333.4 (d) mm or 19.88" x 5.02" x 13.13" (assembled) Weight 2.3 kg or 5.07 lb (this product only), 7.5 kg or 16.54 lb (assembled)

133-22-164-60

URL: http://www.toa.jp/

Step 2. Attach the 4 rubber feet to the bottom surface of the D-

2012C using the 4 supplied screws. Be sure to attach the rubber feet, as the air vents are provided at the bottom surface.

Step 3. Attach the side panel L to the left side of the D-2012C

and side panel R to its right side with 2 each screws.

Step 4. Fit each decorative panel into the holes on the side

panels L and R, then secure them with 2 each screws from the side panels inside.

Step 5. Attach the armrest to the D-2012C's front panel with 3 screws.

Decorative panel*

Machine screw M4 x 10*

Rubber foot*

Machine screw M4 x 25 (with washer)*

Side panel L*

Machine screw M4 x 25 (with washer)*

Armrest*

[Finished assembly]

Side panel R*

* Component parts of the D-2012AS.