Toa CR-413 User Manual
INSTALLATION MANUAL
CABINET RACKS CR-273 (27-UNIT SIZE)
CR-413 (41-UNIT SIZE)
Thank you for purchasing TOA's Cabinet Racks.
Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.
CR-413
Be sure to read this installation manual thoroughly before installing this Cabinet Rack. For the
mounting procedures of the components and the relevant wirings, refer to the instruction manual
attached to each component.
H33-05-001-0A
2
TABLE OF CONTENTS
1. SAFETY PRECAUTIONS ................................................................................. 3
2. CONFIRMING INCLUDED PARTS
2.1. Complete Parts .................................................................................................. 4
2.2. Screws ............................................................................................................... 4
2.3. Accessories Other Than Screws ........................................................................ 4
3. DIMENSIONAL DIAGRAMS
3.1. CR-273 (27-Unit size) ........................................................................................ 5
3.2. CR-413 (41-Unit size) ........................................................................................ 6
4. RACK ASSEMBLY
4.1. Cabinet Rack Assembly ..................................................................................... 7
4.2. YA-706 Supporting Runner (option) Installation ............................................... 12
4.3. BU-412 Blower Unit (option) Installation .......................................................... 13
4.4. Screw Cover Installation .................................................................................. 13
4.5. 2202 Microphone Hanger (option) Installation ................................................. 14
4.6. Cable Duct (commercial item) Installation ........................................................ 15
4.7. Cable Binding ................................................................................................... 16
5. CABINET RACK INSTALLATION
5.1. Installation ........................................................................................................ 17
5.2. Securing to Floor .............................................................................................. 17
5.3. Securing to Wall ............................................................................................... 18
5.4. Securing Multiple Racks in Line ....................................................................... 18
5.5. Installing Eyebolts for Rack Suspension .......................................................... 19
5.6. Making Fine Height Adjustment of Rack .......................................................... 19
5.7. Grounding ........................................................................................................ 19
3
When Installing the Unit
• Avoid installing or mounting the unit in unstable locations, such as on a rickety table or a slanted surface.
Doing so may result in the unit falling down and causing personal injury and/or property damage.
• Install the unit only in a location that can structurally support the weight of the unit and the mounting bracket.
Doing otherwise may result in the unit falling down and causing personal injury and/or property damage.
When Installing the Unit
• Secure the rack to the floor with anchor bolts and to the wall with steel brackets to prevent it from being
toppled over by earthquakes, etc. If it falls down or moves, this may cause personal injury and/or property
damage.
• When unpacking or moving the unit, be sure to handle it with two or more persons. Falling or dropping the
unit may cause personal injury and/or property damage.
• Avoid touching the unit's sharp metal edge to prevent injury.
When the Unit is in Use
• Do not place heavy objects on the unit as this may cause it to fall or break which may result in personal
injury and/or property damage. In addition, the object itself may fall off and cause injury and/or damage.
• Do not stand or sit on, nor hang down from the unit as this may cause it to fall down or drop, resulting in
personal injury and/or property damage.
1. SAFETY PRECAUTIONS
• Before installation or use, be sure to carefully read all the instructions in this section for correct and safe
operation.
• Be sure to follow all the precautionary instructions in this section, which contain important warnings and/or
cautions regarding safety.
• After reading, keep this manual handy for future reference.
Safety Symbol and Message Conventions
Safety symbols and messages described below are used in this manual to prevent bodily injury and property
damage which could result from mishandling. Before operating your product, read this manual first and
understand the safety symbols and messages so you are thoroughly aware of the potential safety hazards.
Indicates a potentially hazardous situation which, if mishandled, could
result in death or serious personal injury.
WARNING
Indicates a potentially hazardous situation which, if mishandled, could
result in moderate or minor personal injury, and/or property damage.
CAUTION
4
2. CONFIRMING INCLUDED PARTS
Refer to the tables below to check quantity of each part before assembling the cabinet rack.
Notes
• Assemble the parts into a complete rack while checking the name label attached to each part and screw.
For covers, the name labels are on their backsides.
• Be sure to use the specified screws to mount the components in the rack.
2.1. Complete Parts
2.2. Screws
2.3. Accessories Other Than Screws
Quantity
CR-413
1
1
1
1
1
1
4
2
1
1
1
1
1
3
Part name
Top plate
Base
Front right frame
Front left frame
Rear right frame
Rear left frame
Side reinforcement bracket
Rear reinforcement bracket
Top cover
Side cover (right)
Side cover (left)
Base cover (front)
Base cover (rear)
Rear cover
CR-273
1
1
1
1
1
1
2
1
1
1
1
1
1
2
Quantity
CR-413
60 (56)
20 (14)
30 (24)
Screw type
Bind head taptite screw type B 5 x 12
Bind head taptite screw type B 4 x 10
Bind head screw M4 x 8
CR-273
50 (44)
20 (14)
20 (16)
( ) = Quantity to be actually used.
Quantity
CR-413
2 (190 cm)
8
20
Accessory
Screw cover
Screw cover rail
Cable tie
CR-273
2 (130 cm)
6
12
5
3. DIMENSIONAL DIAGRAMS
3.1. CR-273 (27-Unit size)
Mountable depth from the panel mounting surface is 410 mm (16.14"). (402 mm or 15.83" to rear
reinforcement bracket)
ø6.5 (0.26) Knockout hole for fixing to a wall
33 (1.3)
4-ø17.5 (0.69) Eyebolt mounting hole (with a hole plug)
338 (13.31)
4-ø12 (0.47) Knockout hole for multiple rack support
69 (2.72)
1364 (53.7)
89 (3.5)
470 (18.5)
566 (22.28)
1013 (39.88)
175
(6.89)
33 (1.3)
435 (17.13)
10 (0.39)
40 (1.57)
20 (0.79)
200
(7.87)
280
(11.02)
Height adjustment screw
(accessible from inside)
Cable entry
opening
360
(14.17)
440 (17.32)
220
115
(4.53)
(8.66)
100
(3.94)
4-ø15 (0.59) for anchor bolt
Cable entry opening
Unit: mm (inches)
6
3.2. CR-413 (41-Unit size)
Mountable depth from the panel mounting surface is 410 mm (16.14"). (402 mm or 15.83" to rear
reinforcement bracket)
ø6.5 (0.26) Knockout hole for fixing to a wall
33 (1.3)
4-ø17.5 (0.69) Eyebolt mounting hole (with a hole plug)
338 (13.31)
4-ø12 (0.47) Knockout hole for multiple rack support
470 (18.5)
33 (1.3)
82 (3.23)
2000 (78.74)
89 (3.5)
280
(11.02)
566 (22.28)
Height adjustment screw
(accessible from inside)
Cable entry
opening
360
(14.17)
220
1649 (64.92)
175
(6.89)
435 (17.13)
115
(4.53)
(8.66)
100
(3.94)
4-ø15 (0.59) for anchor bolt
40 (1.57)
10 (0.39)
20 (0.79)
200
(7.87)
Cable entry opening
Unit: mm (inches)
440 (17.32)
Loading...