Page 1
TOA Corporation C-CC704 1/3
C-CC704
Combination Camera
VP-1061/1121
VP-1241/1361
DESCRIPTION
FEATURES
The C-CC704 is a high-resolution, indoor-use, vandal-resistant 24V AC type surveillance camera with 360° coverage, a 10X optical
zoom lens, and a high-speed camera drive for 200° horizontal rotation and vertical tilting per second. A 12X electronic zoom works in
tandem with the 10X optical zoom lens for greatly enhanced 120X zooming. The unit's privacy masking feature enables user-selected
areas in a camera's field of view to be excluded from surveillance. A route tracing function enables the traces of joystick movement to
be recorded as a route for up to 120 seconds. Eight different routes can be programmed. A tour function allows users to program up to
60 steps out of 64 preset camera positions as a tour pattern to automatically monitor the preset positions in order. This allows a
camera to continuously repeat a travel pattern as a tour, for up to 8 tour patterns. Each tour program may be replaced by a different
travel pattern that has been activated by an alarm input or timer. This alarm function enables three desired camera operations -position replay, touring and tracing -- to be programmed to activate when the camera receives an alarm input. The camera is equipped
with a maximum of four alarm inputs and each alarm input can be set to respond with a different preprogrammed camera movement
pattern. Since the camera unit is constructed of diecast aluminum alloy and its dome cover is made of polycarbonate, the C-CC704 is
highly resistant to even powerful impacts.
C-RM700
Remote Controller
C-BC704U
Flush Ceiling Mounting Bracket
• High resolution: 470 TVL
• 1/4-inch CCD with a resolution of 380,000 pixels (NTSC)
• High sensitivity
Minimum Illumination:2 lx (High sensitivity mode off, 50 IRE)
0.1 lx (High sensitivity mode on, 50 IRE)
• 64 preset positions
• 120X zoom (optical 10X, electronic 12X)
•Auto-focus
• Tilt rotation range: +2° to -90°
•Pan rotation range: continuous 360°
• High speed pan/tilt: 200°/ second
•Four alarm inputs
• Dust and water-proof construction (IP66*)
*When C-BC704W or C-BC704PB is used.
• High resistance to strong impacts
•Privacy masking function (up to 8)
•Auto-pan, Auto-trace, and Auto-tour functions
• RS-485 protocol control
10X varifocal lens included
C-BC704W
Wall Mounting Bracket
C-BC704PB
Pendant Adapter
C-BC771PM
Pole Mounting Bracket
NTSC
Page 2
APPEARANCE AND DIMENSIONAL DIAGRAM
Cable entry hole
(*2)
83.6 (3.29")
Top View
ø99 (ø3.9")
ø157 (ø6.18")
Front View
ø95 (ø3.74")
4–M4
(*2) The pipe receptacle thread is compatible
with NPT3/4 as specified in ANSI/ASME
B1.20.1 (The American Standard Taper
Pipe Threads).
46 (1.81")
Cable entry hole (*2)
(with pipe screw cover)
159 (6.26")
Side View
C-RM700
Remote Controller
Rear View
323.6 (12.74")
Cable clamp
56.8 (2.24")
unit: mm
10
°
65 (2.56")
Bottom View
SPECIFICATIONS
Power Source 24V AC 50/60Hz
Power Consumption 11W
Control RS-485 communications system (applicable protocol: Type A, Type B)
Video Output VBS 1.0V(p-p), 75Ω
Camera Control Terminal RS-485 camera control connector
Alarm Input 4 channels, no-voltage make contact input, open voltage: 5V DC,
Synchronization Internal synchronization
ID 8 characters (alphanumeric and symbols)
No. of Preset Positions 64
Automatic Operation Auto-pan, Auto-trace (8 preset patterns (120s)), Tour (8 preset patterns)
Timer Refresh: Starts at the preset time every week by timer settings
Language English, Japanese
Camera
Image device 1/4 type CCD
Resolution Horizontal: 470 lines (at center)
Number of Effective Pixels 768 (H) x 494 (V) (380,000 pixels)
Scanning System 2 : 1 interlace
Scanning Frequency Horizontal: 15.734kHz, Vertical: 59.94Hz
S/N ratio 50dB
Minimum Illumination High-sensitivity function 0FF: 2 lx (50 IRE), 0.4 lx (20 IRE)
Backlight Compensation ON/OFF
High-Sensitivity Function Slow shutter mode (64 times max.)
White Balance ATW/AWB
Iris Automatic
Flicker Reduction Automatic correction
Electronic Zooming 12x zooming
Auto-Focus Stop AF
short-circuit current; Under 8mA (settable alarm action)
Camera, Position, Trace, Auto-pan, Tour, Sector
High-sensitivity function 0N: 0.1 lx (50 IRE), 0.03 lx (20 IRE)
Unit: mm
Top View
Bottom
View
Lens
Zooming 10X
Effective Focal Length f = 3.8 – 38mm (10X)
Effective Angle of View Horizontal: 50.7° (W) – 5.4° (T), Vertical: 39.1° (W) – 4.1° (T)
Maximum Aperture F 1.8 (W) – F 2.4 (T)
Zoom Speed WIDE end to TELE end Approx. 2.1s (preset operation),
Pan/Tilt Head
Rotating Range Panning: Endless 360° rotation, Tilting: +2° to –90°
Rotating Speed Panning/Tilting: Approx. 200°/s max. (preset operation),
Other Function Privacy Masking (up to 8),
Operating Temperature –10˚C to +50˚C (14°F to 122°F)
Operating Humidity Under 90% RH (no condensation)
Application Indoor used
Dust/Water Protection IP66*
Finish Case, decorative frame: Die-cast aluminium, light gray, paint
Dimensions Camera section external diameter: ø157 × 159 (H)mm (ø6.18" × 6.26"),
Weight 1.8kg (3.97 lb)
Accessory CD (manual (PDF)) × 1, Dome cover mounting screw (M4 × 10) × 3,
Option Wall mounting bracket: C-BC704W, Pole mounting bracket: C-BC771PM,
1
*
Provided that the optional C-BC704W Wall Mounting Bracket or C-BC704PB Pendant Adapter is used in combination.
Approx. 2.1s (manual operation)
Approx. 200°/s max. (manual operation)
(The power needs to be continuously kept on under 0°C (32°F))
1
Dome cover: PC resin (transparent)
Dome external diameter: ø99mm (ø3.9")
Composite cable × 1, TORX wrench × 1, Sealing tape × 1
Flush ceiling mounting bracket: C-BC704U, Pendant adapter: C-BC704PB
Side View
181 (7.13")
63.3 (2.49")
112.7 (4.44")
Figure of the unit installed
TOA Corporation C-CC704 2/3
Page 3
ARCHITECTURAL AND ENGINEERING SPECIFICATIONS
GENERAL REQUIREMENTS
The product specified shall be a motorized speed dome camera system
designed for indoor surveillance applications. The camera system
consists of a high resolution CCD camera using 1/4-inch type CCD
imager with a motorized 10X zoom, auto-iris, auto-focus lens; electronic
12X digital zoom; a high speed, continuous 360 degree/second, pan/tilt
mechanism; programmable privacy masking; internal CPU circuitry with
external programming via RS-485 from camera remote control unit or
RS-232 from PC with TOA camera setup software; compatible with
Pelco-D, Bosch and Panasonic protocols.
Alarm inputs: (4) Four channels shall be provided to trigger preset
selected targets.
Titling options: To facilitate camera use, various titles can be input and
displayed on the monitor.
In addition to camera and position titles, other titles for display include:
trace title (displayed while the trace function is on), tour title (displayed
when tour function is activated) and alarm title (displayed when an alarm
input is received).
Preset operation start with Timer program function: The camera shall
conveniently be set to begin operation at a preset time with a built-in
timer. The timer can be set for a specific date, day of the week or daily.
Fully automatic operation mode shift includes sensitivity boost, AGC,
normal condition and backlight compensation to smoothly transition as
lighting conditions change.
Route tracing function: The traces of joystick movement can be recorded
as a route for up to 120 seconds. (8) Eight different routes can be
programmed.
Tour function: Among 64 preset positions, up to 60 steps can be
programmed as a tour pattern to automatically monitor preset points in
order. Up to (8) eight tour patterns can be programmed. Any tour
program is able to have a different travel pattern that can be activated by
an alarm input or timer.
Programmable Alarm function: Desired camera operations such as
position replay, touring and tracing can be programmed to activate when
the camera receives an alarm input. The camera is equipped with (4)
four alarm inputs and each alarm input can be set to respond with
different preprogrammed operation.
Outdoor Installation: The camera shall fully conforms to IP66 standards.
Other functions shall include 64 preset positions, automatic positional
correction (automatic positional deviation) and refresh function (slip-ring
cleaning).
The camera shall have flexible installation options utilizing the wide
range of mounting brackets available.
CAMERA SPECIFICATIONS
Image device: 1/4 type CCD
Horizontal Resolution: 470 TVL (at center) NTSC
Signal to Noise Ratio: 50dB
Minimum Illumination:
High-sensitivity function OFF: 2 lx (50 IRE), 0.4 lx (20 IRE)
High-sensitivity function ON: 0.1 lx (50 IRE), 0.03 lx (20 IRE)
Backlight compensation: ON/OFF
High-Sensitivity Function: Slow shutter mode (64 times max.)
White Balance: ATW/AWB
Flicker Reduction: Automatic correction
Electronic Zooming: 12x zooming
Auto-Focus: Stop AF
LENS SPECIFICATIONS
Zooming: 10x
Effective Focal Length: f=3.8-38mm (10x)
Effective Angle of View: Horizontal: 50.7° (W) – 5.4° (T)
Ver tical: 39.1° (W) – 4.1° (T)
Maximum Aperture: F 1.8 (W) – F 2.4 (T)
Zoom Speed: WIDE end to TELE end
Approx. 2.1 sec (preset operation)
Approx. 2.1 sec (manual operation)
PAN/TILT HEAD SPECIFICATIONS
Rotating Range: Panning: Endless 360°
Tilting: +2° to -90°
Rotating Speed: Panning/Tilting: 200°/sec max. (preset operation),
200°/sec max. (manual operation)
ELECTRICAL SPECIFICATIONS
Power Source: 24V AC 50/60 Hz
Power Consumption: 11W
Control: RS-485
Video output: VBS 1.0V(p-p), 75Ω
MECHANICAL SPECIFICATIONS
Dimensions: Camera section external diameter: ø157 x 159 mm (H)
(ø6.18” x 6.26”)
Dome external diameter: ø99mm (ø3.9”)
Weight: 1.8 kg (3.97 lb)
Rotating range: Panning: Endless 360° rotation,
Tilting range: +2° to -90°
Rotating speed: Panning/Tilting: 200°/sec max. (preset operation),
200°/sec max. (manual operation)
Finish: Case, decorative frame: Die-cast aluminum, light gray, paint
Dome cover: PC resin (transparent)
ENVIRONMENTAL SPECIFICATIONS
Operating temperature: -10° C to +50° C (14° F to +122° F)
Operating humidity: Under 90% RH (no dew condensation)
CERTIFICATIONS AND RATINGS
Dust/Water protection: IP66
This device complies with part 15 of FCC rules.
Safety: UL Listed
The speed dome camera shall be TOA model C-CC704.
The remote controller shall be TOA model RM-700.
The wall mounting bracket shall be TOA model C-BC704W.
The flush ceiling mounting bracket shall be TOA model C-BC704U.
The pole mounting bracket shall be TOA model C-BC771PM.
The pendant-mount adapter shall be TOA model C-BC704PB.
TOA Corporation C-CC704 3/3
TOA Corporation
www.toa.jp
Specifications are subject to change without notice.
(0906) 833-52-402-10 u
Loading...