Page 1
FEATURES
DESCRIPTION
TOA DSP Color Cameras are designed for high
performance, extending their capabilities to surpass
those achieved with human eyesight. The images that
these cameras provide are extremely natural-looking
and closely relate to how the human eye views images.
This high performance is maintained even with less
than perfect lighting conditions such as backlighting.
The cameras are also able to offer an enhanced night
vision function thanks to an electronic sensitivity
booster and B/W mode that is built-in. Even in poor light
conditions, images will always stay clear and visible,
facilitating effective monitoring.
New Wide Dynamic Range
Provides a new level of performance with natural
looking images even in backlight condition.
500-line high resolution (NTSC)
Minimum required illumination level of as low
as 0.5 lx (50 IRE)
B/W mode
Clear images are provided even in unsatisfactory light
by B/W mode.
Maximum 64X sensitivity booster
Enables increasing sensitivity to take color images
even in night conditions.
Privacy masking function
Allows privacy protection for up to 4 locations.
Can be controlled from a distant location
Using the C-RU10 Camera Remote Unit allows
convenient control of camera parameters.
Backlight compensation
Allows optimal viewing of dark areas in a
backlight condition.
Newly developed DSP
Easy focusing without using the ND filter
Alarm input
Motion detection
Fully automatic operation mode shift
Easy menu-driven setup
2X Electric Zoom
Screen Reverse function (Horizontal/Vertical)
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
C-CC364
WIDE DYNAMIC RANGE
COLOR CAMERAS
(Lens is optional)
Page 2
WIDE DYNAMIC RANGE COLOR CAMERA
C-CC364
New Wide dynamic range
New DSP
Electronically combining the images taken using both low-speed and
high-speed shutter gives single clear image.
Low-speed shutter creates whiteout
of outdoor.
High-speed shutter loses details of
indoor.
Conventional Method
CCD output
1/60sec
time
TOA Wide Dynamic Method
CCD output
1/120sec 1/120sec
time
variable
high-speed shutter
(1/120sec to 1/4000sec)
low-speed shutter
1/60sec
Wide dynamic range intensity can be set to
match the degree of backlighting present in the
monitored area.
As the screen is divided into a grid of 48 segments,
the desired target areas can be selected within this grid.
For areas that do not require backlight compensation or
have constant motion in them, the wide dynamic range
function can be disabled, allowing this function to
perform at its maximum. The wide dynamic range
function intensity can also be adjusted to suit the
degree of backlighting present.
The C-CC364 camera achieve a remarkable dynamic range .
The wide dynamic range allows optimizing an image by
automatically adjusting both dark and light areas to ensure
the targeted area has ideal contrast and visibility.
TOA Wide Dynamic Range Method
Crucial to achieving the extremely wide dynamic range
function is the new TOA proprietary DSP.
Using sophisticated digital video processing allows
electronically combining two separate images taken with
different shutter speeds to result in one perfect image.
Conventional cameras employ a single speed of 1/60sec.
when taking images. TOA’s Wide Dynamic Range Method
makes use of two shutter speeds, one set at 1/120sec. and
one that is variable from 1/120sec. to 1/4000sec. to take
two images which are electronically combined to produce
a single, high-quality image.
CCD
Memory circuit
Memory circuit
Gain control
Synthesis
Video output
Gain control
High-speed shutter output
Low-speed shutter output
User-definable target areas for wide dynamic
range function.
Page 3
WIDE DYNAMIC RANGE COLOR CAMERAS
C-CC364
48 segmented areas
Pattern 1
Pattern 2
Maximum 64 times sensitivity boost
Fully automatic operation mode shift
Magnification sensitivity can be increased as needed all the
way up to x64 in steps of x2, x4, x6, x8, x10, x16, x24, x32
and x64 to compensate for lighting conditions that may be
unsatisfactory. Sensitivity is boosted automatically to the
point where good images can be captured. The camera now
works well with a minimum illumination level of as low as
0.01 lx, enabling night video surveillance in color.
•B/W Mode
When an illumination level of the monitoring area becomes
too low for capturing clear images in color, the camera
automatically switches to the B/W mode. This function
makes it possible to monitor target and target areas that
cannot be seen in normal light.
* boosting sensitivity may increase the afterimage phenomenon as
shutter speed is reduced.
*Using B/W mode requires dedicated lens.
TOA'S Wide Dynamic Range cameras have been designed
to overcome the problems encountered by conventional
CCD cameras. Most of these problems originate from trying
to accurately focus when the area of coverage includes
areas with varying brightness. Because cameras in some
cases are affected by the bright areas they are monitoring,
there are some hard-to-see dark areas. When backlight
compensation mode is selected, the camera divides an
image into 48 segmented areas and compares the
brightness in each area, to automatically adjust the required
amount of backlight compensation for the desired segments.
The user selects the image area that is most important for
viewing by segments. The backlight function then works to
adjust light conditions concentrating on the selected image
area, providing optimal view for effective monitoring.
The 3 segment selection options for compensation are:
Pattern 1 that selects segments located in the center and
lower half of the screen. Pattern 2 for a user-defined single
area. Manual for precise user-defined control for selecting
one or more segments that will be backlight-compensated.
* Backlight compensation is switched off when the wide dynamic
range function is used.
TOA wide dynamic range cameras allow shifting between modes
automatically, smoothly transitioning from mode to mode.
Backlight compensation
High resolution images
TOA cameras provide a high horizontal resolution level of
500 lines for excellent image quality.
Privacy masking function
For privacy protection, users are allowed to select up to 4
locations to be masked in a camera's field of view.
Motion Detection Function
A screen is divided into 48 segments, and motion detection
is performed in each of the segmented areas. When motion
is detected, motion-detection signals can be output from the
remote unit C-RU10 via the coaxial cable used for sending
image signals from the camera.
*This function is possible only when the camera is used together with the
C-RU10.
Output of both image and alarm signals via
a single cable
The camera is equipped with a terminal for input of sensor
signals. The alarm signals from a sensor can be
superposed on the coaxial cable used for transmitting
images captured by the camera. This feature reduces
cumbersome cabling.
*This function is possible only when the camera is used together with the
C-RU10.
Minimum required illumination of 0.5 lx
Featuring high sensitivity that is minimum required
illumination of 0.5 lx (50 IRE), TOA cameras deliver clear
color and full motion images even under poor lighting
conditions.
Focus adjustment switch for easy focusing
To simplify focusing even
without using the ND filter, an
adjustment switch is provided
for foolproof focusing.
ON OFF
B/W mode.
(color image)
(B/W image)
Sensitivity boost allows
cameras to provide good
color image quality for
dark areas.
Sensitivity
Boost
AGC
Normal
Wide Dynamic
(Backlight condition)
Backlight
Compensation
(Backlight condition)
(standard condition)
(Low-light condition)
B/W
Mode
(Low-light condition)
(Low-light condition)
Video signal level
detection
video signal level
detection
Contrast difference
detection
Page 4
SPECIFICATIONS (NTSC)
Power Source 24V AC, 50/60Hz or 12V DC
Power Consumption 4W
Image Device 1/3 type IT-CCD
Number of Effective Pixels 768 (H) × 494 (V) (380,000 pixels)
Scanning System 2:1 interlace
Scanning Frequency Horizontal: 15.734kHz, Vertical: 59.94Hz
Video Output VBS 1.0V (p-p) 75Ω, BNC
Synchronizing System Internal/Line lock (phase adjustable)
Resolution Horizontal: 500 lines (at center), Vertical: 350 lines (at center)
S/N Ratio 50dB (AGC OFF)
Minimum Required Illumination 0.5 lx (50 IRE), 0.1 lx (20 IRE) (F1.0) (sensitivity up: OFF) (color operation)
0.01 lx (F1.0) (sensitivity up: ON) (Black-and-white operation, incandescent lamp)
Automatic Electric Shutter Range
1: 2000 (F1.4 – 63)
Dynamic Range 46dB (wide dynamic ON)
Shutter Speed 1/60, 1/100, 1/125, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000
Backlight Compensation WIDE DYNAMIC/ON/OFF
AGC Auto/Fixed/OFF
Sensitivity Up OFF, 2, 4, 6, 8, 10, 16, 24, 32, 64 times
White Balance Mode ATW/AWB/Manual
Character Display Up to 16 characters (alphanumeric and symbols)
Other Function Privacy Masking, Electronic Zooming (2X), Up-and-down, flip horizontal,
Sync position switching (DIP switch), Flicker Reduction (DIP switch),
Control switch (DIP switch), Chroma Level: Normal/Manual (MIN – MAX),
Enhancer Level: Normal/Manual (soft –sharp)
Alarm Input 1 channel, no-voltage make contact input, open voltage: 10V DC,
short-circuit: Under 5mA,
loop resistance: Under 200Ω (alarm output from the camera remote unit),
screwless connector,
motion detector (alarm output from the camera remote unit)
Color/B&W Switching Input 1 channel, no-voltage make contact input, open voltage: 10V DC,
short-circuit: Under 5mA, loop resistance: Under 200Ω
Lens Mount CS mount
Auto-Iris Lens Output DC input type/VIDEO input type (4-pin connector)
Operating Temperature –10˚C to +50˚C
Operating Humidity Under 90% RH (no due condensation produced)
Application Indoor use
Finish Case: Surface-treated steel plate, sand gray
Dimensions 69.5 (W) × 65.1 (H) × 137.1 (D)mm
Weight 450g
APPEARANCE AND DIMENSIONAL DIAGRAM
•New Wide Dynamic Range
Provides a new level of performance with natural looking
images even in backlight condition.
• 500-line high resolution (NTSC)
• Minimum required illumination level of as low as 0.5 lx
• B/W mode
Clear images are provided even in unsatisfactory light
by B/W mode.
• Maximum 64X sensitivity booster
Enables increasing sensitivity to take color images even in night
conditions.
• Privacy masking function
Allows privacy protection for up to 4 locations.
• WDR cameras can be controlled from a distant location.
Using the C-RU10 Camera Remote Unit allows convenient
control of camera parameters.
• Backlight compensation
Allows optimal viewing of dark areas in a backlight condition.
•Newly developed DSP
• Easy focusing without using the ND filter
• Alarm input
• Motion detection
• Fully automatic operation mode shift
• Easy menu-driven setup
• 2X Electric Zoom
• Screen Reverse function (Horizontal/Vertical)
WIDE DYNAMIC RANGE COLOR CAMERA
C-CC364
(Lens is optional)
18
34.8
2–1/4–UNC
unit: mm
69.5
68
65.1
56.4
137.1
129.3
Front View
Top View
Side View
Bottom View
Rear View
Page 5
APPEARANCE AND DIMENSIONAL DIAGRAM
SYSTEM EXAMPLE
SPECIFICATIONS
Power Source 120V AC, 50/60Hz
Power Consumption 1W
Control Input 1 channel, VBS 1.0V (p-p), 75Ω, BNC
Video Output 1 channel, VBS 1.0V (p-p), 75Ω, BNC
Alarm Output 1 output, open collector output, withstand voltage: 24V DC,
maximum current: Under 0.3 A
Cable Compensation Function 3-step switch (S, M, L) (only when AC/DC drive camera is connected)
Function Maximum Camera 5C-FB, 7C-FB: 1.2km
Cable Length 7C-2V: 1.0km
5C-2V: 800m
3C-2V: 600m
Vertical External Synchronization ON (when AC drive camera is used)
OFF (when one cable camera is used)
Switch Function MENU, CLEAR, SET, UP, DOWN, RIGHT, LEFT
Operating Temperature –10˚C to +50˚C
Finish Panel: Aluminum extrusion, black, 30% gloss, paint
Case: Pre-coated steel plate, black, 30% gloss
Dimensions 210 (W) × 54 (H) × 295.5 (D)mm
Weight 1.6kg
Accessory BNC (T type) × 1, Power cord (2m) × 1
Application Camera (option) C-CC354A, C-CC364
Option Rack mounting bracket: MB-15B-BK (for rack mounting one C-RU10 unit)
MB-15B-J (for rack mounting two C-RU10 units)
Monitor
Sensor
C-CC364 with lens
C-RU10
Alarm output
Alarm input
CAMERA REMOTE UNIT
CAMERA MOUNTING
BRACLETS
C-RU10
Camera function settings, and color and brightness adjustments
can be remotely controlled with ease by connecting the C-RU10
to a camera featuring camera remote function.
The C-RU10 permits control signals to be superimposed over the
camera video signal when connected to AC or DC power cameras
using a single coaxial cable, and motion detection or alarm
signals from the camera to be received. With the use of an
optional rack mounting bracket, it can be mounted in an EIA
Standard equipment rack (1 unit size).
210
284.8
unit: mm
295.5
44
54
Front View
Side View
Rear View
WH-4
Wall Camera Mounting Bracket
• Maximum load: 10kg
• Angle adjustment: V; 90°, H; 360°
C-BC11
Ceiling Camera Mounting Bracket
• Maximum load: 4kg
• Angle adjustment: V; +90° to –15°, H; 360°
• Length: 305mm (max. 465mm)
C-BC21
Ceiling/ Wall Camera Mounting Bracket
• Maximum load: 4kg
• Angle adjustment: V; +90° to –15°, H; 360°
C-BC31
Ceiling Camera Mounting Bracket
• Maximum load: 4kg
• Angle adjustment: V; +90° to –15°, H; 360°
• Length: 130mm
C-BC41
Ceiling Camera Mounting Bracket
• Maximum load: 4kg
• Angle adjustment: V; +90° to –15°, H; 360°
• Length: 617mm (max. 1004mm)
Page 6
Specifications are subject to change without notice.
Printed in Japan (0503) 833-52-328-40 U
TOA Corporation
URL : http://www.toa.jp/
Setup for Camera
Setup Screen
Conveniently allows setting up a camera and making adjustments
and parameter changes through a menu-driven setup procedure.
IR
IS
L
E
V
E
L
0
P
E
A
K
0
S
H
U
T
TE
R
S
P
E
E
D
N
O
R
M
A
L
W
H
IT
E
B
A
L
A
N
C
E
A
TW
0
C
H
R
O
M
A
N
O
R
M
A
L
E
N
H
A
N
C
ER
N
O
R
M
A
L
A
G
C
S
L
O
W
S
H
U
T
T
E
R
A
U
T
O
M
A
X
+1
4
D
A
Y
/N
IG
H
T
M
A
X
X
64
N
E
X
T P
A
G
E
O
F
F
P
A
G
E
(1/2
)
P
A
G
E (2
/2)
B
A
C
K
L
IG
H
T
O
F
F
P
R
IV
A
C
Y
M
A
S
K
O
FF
E
-Z
O
O
M
O
F
F
R
E
VE
R
S
E
HO
F
F
VO
F
F
C
A
M
E
R
A
ID
O
F
F
A
LA
R
M
O
U
T
P
U
T
M
O
T
O
FF
E
X
T
O
F
F
P
R
E
S
E
T
P
R
E
V
IO
U
S
P
A
G
E
IRIS
Setting Item
LENS SELECT
Sets the lens type.
SHUTTER SPEED
Sets the shutter speed.
WHITE BALANCE
Sets the camera's white balance
(ATW/AWB/Manual).
CHROMA
Adjusts the chroma level.
ENHANCER
Sets the enhancer.
AGC
Set the AGC (Auto/Fixed/OFF).
SLOW SHUTTER
Sets the maximum sensitivity
boost level.
DAY/NIGHT
Sets the B/W mode.
BACKLIGHT
Setting Item
MANUAL/
PATTERN 1/
PATTERN 2
WIDE DYNAMIC
Sets the wide dynamic range
cover area and the sensitivity level.
Sets the backlight compensation
area.
Sets the backlight compensation.
MOTION DETECTION
Sets motion detection
(LEVEL/AREA).
EXTERNAL
Sets external alarm inputs.
PRIVACY MASK
Sets privacy masking area (four areas).
E-ZOOM
Sets the electronic zoom (X2) area.
REVERSE
Sets the H-REVERSE/V-REVERSE.
CAMERA ID
Sets the camera's title.
ALARM OUTPUT
Sets alarm operations.
PRESET
Allows resetting all functions and
controls to default settings.
Sets the iris level.
Loading...