Page 1
Thank you for purchasing TOA wall mounting
bracket.
Please carefully follow the instructions in this
manual to ensure long, trouble-free use of your
equipment.
WALL MOUNTING BRACKET C-BC511W
INSTALLATION MANUAL
1.SAFETY PRECAUTIONS
• Before installation or use, be sure to carefully read all the instructions in this section for correct and safe
operation.
• Be sure to follow all the precautionary instructions in this section, which contain important warnings and/or
cautions regarding safety.
• Keep this instructions handy for future reference.
Indicates a potentially hazardous situation which, if mishandled, could
result in death or serious personal injury.
WARNING
• Install the unit only in a location that can structurally support the weight of the unit and the mounting bracket.
Doing otherwise may result in the unit falling down and causing personal injury and/or property damage.
• Do not use the bracket for mounting any camera other than the combination camera. Failure to follow this
instruction could cause the camera to fall and result in personal injury.
• Ensure that all screws and fixing mechanism are securely tightened. If they are not tightened or firmly
secured after installation, the unit could fall down, possibly resulting in personal injury.
Page 2
When Installing the Unit
• Avoid installing the unit in unstable locations, such as on a rickety or slanted surface. Failure to do so may
result in the unit falling and possibly causing personal injury.
• Only use the unit's dedicated mounting bracket. The use of mounting bracket not designated could result in
the unit falling and possibly causing personal injury.
• Do not use any methods other than specified to mount the bracket. Extreme force is applied to the unit and
the unit could fall off, possibly resulting in personal injuries.
• Attach the safety wire to the unit. If not attached, the unit could fall off, resulting in personal injury.
• Use nuts and bolts that are appropriate for the ceiling's or wall's structure and composition. Failure to do so
may cause the unit to fall, resulting in material damage and possible personal injury.
• Tighten each nut and bolt securely. Ensure that the bracket has no loose joints after installation to prevent
accidents that could result in personal injury.
• Avoid installing the unit in locations exposed to sea breeze or corrosive gas. Mounts may become corroded,
eventually causing the unit to fall off, which could result in personal injury.
• Do not mount the unit in locations exposed to constant vibration. The mounting screws and/or bolts may be
loosened by excessive vibration, potentially causing the unit to fall, which could result in personal injury.
When the Unit is in Use
• Do not touch the unit during thunder and lightning, as this may result in electric shock.
Indicates a potentially hazardous situation which, if mishandled, could
result in moderate or minor personal injury, and/or property damage.
CAUTION
When Installing the Unit
• Leave the installation of the unit to your TOA dealer because the installation requires expert experience and
skills. Incorrect installation may cause an electric shock or personal injury.
• Avoid installing the unit in locations exposed to sea breeze or corrosive gas. Mounts may become corroded,
eventually causing the unit to fall off, which could result in personal injury.
• Avoid touching the unit's sharp metal edge to prevent injury.
• To avoid electric shock, be sure to switch off the power before power supply wiring work.
When the Unit is in Use
• Do not stand or sit on, nor hang down from the unit as this may cause it to fall down or drop, resulting in
personal injury and/or property damage.
• Be sure to inspect the unit periodically for safety use. Damage or corrosion of the mounting bracket may
cause dropping of the unit, resulting in personal injury and/or property damage. Contact your TOA dealer as
to the periodical inspection.
Page 3
2. GENERAL DESCRIPTION
The wall mounting bracket is designed to be used exclusively for mounting TOA's Combination Camera (CCC514, C-CC564 and C-CC574) and/or Network Combination Dome Camera (N-CC2564) on a wall.
By using this bracket in conjunction with the C-BC511C or C-BC511C-S Ceiling Mounting Cover, cameras can
be installed on a wall.
3. HANDLING PRECAUTIONS
• Fix the camera to the bracket using the designated mounting screws and ensure that the camera does not
rattle.
• Mount the bracket to a heavy-duty ceiling surface (such as concrete ceiling).
• Bolts and nuts used to install the unit on a wall are not supplied with the unit. Be sure to prepare bolts and
nuts separately keeping the wall’s structure and material, gross weight, etc in mind.
• Do not install the unit in locations exposed to constant vibration. The unit is not designed for vehicle or ship
use. Do not install the unit in a vehicle or ship.
• To prevent the unit falls off, be sure to hang the safety wire first when installing the unit.
• The Combination Camera is solely designed for suspended installation. The dome of the mounting bracket
must be mounted facing down and perpendicular to a horizontal ceiling surface. Take special care not to
install the dome at a tilted angle.
• Do not give the unit a great shocks or vibration, as the unit may fall off and cause damage.
Page 4
Pipe : Stainless-steel pipe
Top cover : PC/ ABS resin, cool gray
Metal part : Surface treated steel plate, black, paint
150 (W)x 203 (H)x 203 (D)mm (5.9 (W)x 8.0 (H)x 8.0 (D)inch)
1.1 kg (2.4 lb)
C-CC514, C-CC564, C-CC574, N-CC2564
C-BC511C, C-BC511C-S
Finish
Dimensions
Weight
Applicable camera
Applicable cover
Note: The design and specifications are subject to change without notice for improvement.
• Accessories
Top cover ................................................... 4
Safety wire ................................................. 1
Pattern paper ............................................. 1
1. Mount the wall mounting bracket on a
wall.
• Mounting anchor bolt (female screw): M4
• Cable entry hole : ø50 – 60 mm
(ø2.0 – 2.4 inch)
2. Attach the base unit equipped with
footings to the wall mounting bracket.
Note
To attach the base unit to the bracket,
use the camera mounting screws
supplied with the combination camera.
3. Connect the cables and attach the
camera unit to the base unit.
4. Align the camera installation cover's
positioning mark and that on the base
unit and insert the cover to the base unit.
5. Rotate the camera installation cover
clockwise until it locks into place.
6. Attach top covers to the camera side
and wall side as well.
Be sure to carefully read the installation
manual supplied with the camera.
[ Wall mounting bracket base
dimensional diagram ]
[ Main body mounting view ]
4. INSTALLATION
5. SPECIFICATIONS
133-05-396-4A
Wall Mounting Bracket
C-BC511W
6
Top cover
(accessory)
Combination
Camera
(optional)
C-CC514
C-CC564
C-CC574
Network
Combination Dome
Camera (optional)
N-CC2564
2
1
3
Safety wire
(supplied with
the combination
camera)
Footing
Base unit
Camera unit
Wall
Ceiling Mounting
Cover (optional)
C-BC511C
C-BC511C-S
4
5
40 (1.6)
81 (3.2)
46 (1.8)
70 (2.8)
Unit: mm (inch)
Loading...