User ’s manual
IP Wall-mounted Speaker BS-P678IP1
Thanks for your purchase of TOA products IP-1000 series.
Please read the manual carefully to ensure the machine operating in long time and fault-free.
TOA Corporation
Chapter 1
Safety precaution
Chapter 1: safety precaution
Please abide by the warning and t he r elevant safety tips.
Please place this manual in convenient place after you reading the guide for future reference.
Warning
The sign means there is potential safety hazard, when operate wrong may result in
death or serious injury.
The sign is used to remind the user that attached is the important operation and
maintenance data.
（1）Avoid getting wet by water.
Do not make the machine wet or expose to ra in wate r or other l iquid cont amin ation of t he environ ment,
or lead to fire or electric shock.
（2）Do not use unspecified voltage.
Using the marked voltage on the machine.
Using more than the logo of voltage could lead to fire or shock.
（3）Do not scratch the power cor d.
Do not scratch the power cord or cut it.
Simultaneously, keep the power line far way from heated objects, put heavy things on it will lead to
fires or electric shock.
Using machine
（1）In case of the anomalies
Please turn off the power supply imme diately when finding the abnormal phenomena. Please connec t
with the agency. If continu e t o using t he equip ment , it is likely t o catch fire or resulted in electri c shock.
·The smoke or smell of the machine.
·The inside of the machine is floo ded by water or external intrusion.
·Machine falling or machine case damage.
·The power cord damage ( w ire cor e is exposed of broken, etc)
·Malfunction (e.g no network connection, no sound etc. )
（2）Do not open the machine inter nal or modify the machine.
Do not let external substance getting into the equipment.
Please do not put any metallic or inflammable objects into the machine, otherwise it may cause fire or
electric shock.
（3）Please do not touch it during thundering
To avoid elect ric shock, please do not touch the machine and the plug during lightning, etc.
（4）Please do not place containers with liquid or sma l l metal objects on the machine.
If containers drop and liquid get int o t he m achine, that will li k ely catch fires or cause electric shock.
（5）Do not open the machin e internal or modify the machine.
The machine contains high voltage parts, once open the cover or modify the machine, it may result in
fires or cause shock. All the maintenance and other machine modification should be operated by
professional personne l.
（6）Maintenance and the precautions for not using in a long t i m e.
While maintenance, if the ma chine is not been used for 10 days or more, pl ease turn off power supply
switch for safety. If do not co mp ly with this provision, it will likely caus e electric shock or fires.
1-1
Chapter 2
Products description
Chapter 2: produc ts description
2.1Summary
2.1 Summary
BS-P678I is an IP wall-mounted speaker, which can receive broadcast from other devices or servers. It
supports system setting via browser with loop detection function to check the speaker, and to select
sound source at the same t ime.
Line input
Spea ker c an c onnect to other audio signal devices for broadcasting sound so ur ce.
Loop detection
Speaker has self-detection function showi ng equipment status via loop detection.
Receiving broadcast
Spea ker c an r eceive broadcast from other devices or servers.
Program timer
Uploading every day sound source to the server, programming the broadcasting plan, the speaker
can automatically broadcast according to the server con fig ur at i on plan.
Working status i ndicator
Speaker has working status indicator, which shows the working status via the color and flash of the
indicator light.
System setting via browser
User can set network parameters, audio parameters, login password modification via browser to
realize personalized con f i gur ation.
2-1
Working st atus
Indicator light
Cable not connected
Green light flashes slowly, orange light off
Offline
Green light flashes slowly ,orange light always on
Free
Green light always on
Receiving broadcast
Green and orange light is flashes quickly
Chapter 2: products description
2.2 Connector description
①Amplifier output connector: connector color is black, specification is 3. 81-2P, connecting external
speaker, when the speaker receives the broadcasting, t he sam e sound can be heard from the spe aker.
The Rated impedance: 8Ω, the rated output power :10W
The "+" is positive pole of am pl ifier output, "-" is negative pole of amplifier output.
②Network connector: the specification is RJ -45, inserting cable to connec t w it h ser ver, the network
connector with green and or ange indicator light, which can indicate the speaker wor k ing status.
③Power connector: D C2 4V/1A, supplying power for speaker.
④Line input connector: connector is green, the specification is 3.81-2P, the audio signal of other devic e s
can be accessed as audio sound source.
Rated audio input (unbalance):1Vrms(Max:2Vrms), the max audio input 2Vrms, audio input
impedance:10KΩ；
The "+" is the signal end, "-" is ground signal end;
The line input sound source as local one, it can interrupt the audio program of network sound source, it
needs audio priority con fig ur at ion in the web page.
2-2
Chapter 3
Wiring
Chapter 3: wiring
(1) Separating the cov er and t he back shell, the
3.1 .1 BS-P678IP1 W ir i ng diagr am
Note: 2P green conntector is for line input, 2P black conntector is for amplifier output.
3.1.2 BS-P678E wirin g diagram
3.1 Wiring
specific steps pleas e refer to P3-2.
(2) Please refer to the picture to insert the cable
into the connector according, and connecting BS
-P678IP1 and BS-P678E.
3-1
：
Chapter 3: wiring
3.2 Installation description
3.2 Installation description
[Required accessories]
The required parts are included in accessories.
Screw M4*3 ......................................................................... 2
Step 1:o pen the IP wall-mounted speak er’s
mask, loosen the two torsion spr i ngs ,
separating the mask and the shell.
Step2: the speaker is installed with t he
attached tapp ing screw(M4*35)
Note:
The speaker can be inst al led in hori zontal
or vertical direction. No matter it is
concealed wiring (wall wiri ng) or open
wire ( outside wall wiring) all suitable for
IP wall-mounted speaker.
ACable inlet
○
( it suitable for open wire horizontal
installation)
BCable inlet
○
(it suitable for horizontal concealed wiring)
CCable inlet
○
(it suitable for vertical open wire and
concealed wiring).
Step 3: the mask is re-installation on the
shell.
Note: When the angle of the speaker and
trademark is differ ent, pl e ase pull up it ge ntly
and turning it to the appropr iate location.
Note
same installat i on.
BS-P678E and BS-P678IP1 is in the
3-2
3.3Reference size (unit: mm)
Chapter 3: wiring
3.3 Reference size
3-3
Chapter 4
System setting via browser
Chapter 4: system setting via browser
4.1 Entering browser
4.1Entering the browser
Step 1: Please input: IP address of the speaker (factory defaults is 192.168.1.101), then press
Enter.
Step 2: Please input the user name and password in the login window of the Web page ( the
defaults is admin).
Note: there is different letter of the user name and password.
Step 3: It can enter into the Web page after pressing Enter.
4-1
4.2 Network parameters
Identify the unique number of the speaker and it can’t be repeated with
IP address
IP address of spea ker
The defaults port number is 2046, please don’t modify it if not in
Subnet mask
please setting subnet mas k(the defaults to :255.25 5. 255. 0)
Defaults gateway
The gateway of the speaker ( t he d efa ults is :192.168.1.1)
DNS server 1
The IP of preferred dom ain interpreter in the speaker’s networ k.
DNS server 2
The IP of standby domain interpreter in the speaker’s network.
System server
IP address of IP br oadcast server
The defaults server number is 2048, please don’t modify it if not in
The Web page of the speaker’s application segment procedure
(Firmware) is support for switchover of English and Chinese, but the
ure (BIOS) isn’t support for
switchover of English and Ch inese.
Handshake
Chapter 4: system setting via browser
4.2 Network parameters
Device number
Device port
System server port
Language
other devices or hosts.
specially situation.
specially situation.
Web page of bottom segment proced
interval
Setting the interval time b etween the speaker and the serv er.
4-2
t coding, PCM means no data be compressed, ADPCM
means packed data (low network data v alue).
Line input volume
The volume of audio line input
Line input
circuit and sound source noise, when the line input
s smaller than the value (line input thre shol d value), it will
turn off the amplifier automatically within 1min. Line input threshold
value is divided into to 3 levels, 20mV, 30mV, 50mV respectively,
20mV audio range is the low est, 50mV audio range is the highest.
Network loop
The speaker will detect the voice according to the level of IP loop
detection threshold valu e of the device, whe n there is no sound output,
The sensitivity of the first level detection is the highest, and the
sensitivity of the five stage detection is the lowest.
sampling rate
cast output
volume
mounted speaker total output volume in broadcasting
( 0~15,level 6 is 0dB )
It can select local and network priority, the defaults is network priority.
：
line input>IP broad cast >PTT broadcast.
4.3 Audio parameter s
Chapter 4: system setting via browser
4.3 Audio parameters
Coding mode
threshold value
detection
threshold value
Broadcasting
Broad
Audio priority
Broadcas
In order to avoid
audio range i
the server will have pop up display for the fault information.
IP circuit detection function can be disabled;
IP wall-mounted speaker sampling rat e in broadcasting
IP wall-
Network priority: I P br oadcast>PTT broadcast>ling input；local priority
4-3
Chapter 4: system setting via browser
4.4 Web management
4.4 Web manageme nt
You can modify the account number and pa ssw or d in the Web management parameters.
4-4
Chapter 4: system setting via browser
4.5 Restartin g device
User can click “restart device” to restart the speaker.
4.5 Restarting device
4-5
Chapter 4: system settings via browser
4.6 Resetting to defaults
resetting to defaults: all the parameters w il l reset t o defaults.
4.6 resetting to defaults
4-6
Chapter 4: system setting via browser
4.7Firmware upgrade
4.7Firmware upgrade
clicking “into the firmware upgrade mode” t o ent er t he fir mware upgrade interface.
Click browse in the upgra de f irmware interface, please select the correct upgrade files , cl ick on
"upgrade", it will automat i c al ly restart after comp leted the upgrade.
4-7
Chapter 4: system setting via browser
4.8 System log
4.8 System log
Browser the log of the spea ker in the Web page, clicking “delete all logs”, all lo gs can be deleted in the
Web page.
4-8
Chapter 5
Appendix
5.1.1 IP Wall-mounted Speaker BS-P678IP1
Model number
BS-P678IP1
Loudspeaker assembly
6 "(16 cm) double cone type
Power
DC24V / 1A
Power consumption (static
power)
1.85W
Load impedance
8Ω
10W
SPL （1m/1w）
94dB
Frequency response
150-20,000Hz
Input terminal
European standard 2P
Line input
Range: 1Vrms (Max:2Vrms), unbalance, 10KΩ
Network I/F
10BASE-T/100BASE-TX,automatic determination
Network protocol
UDP,ARP,ICMP,HTTP,IGMP
Working temperature
-20 ℃~+40℃
Working hu m idity
Lower than 90%RH(No dew point)
A
Box: wood ,gray white col or
Grid: steel mesh surface treatment, gray white color
Accessories
Retaining screw M4× 35 (2PC S),2P conn ection ter minal (2 P CS), Networ k port
cover (1set)
Model number
BS-P678E
Loudspeaker assembly
6”(16cm) double cone type
Load impedance
8Ω
10W
SPL（1m/1w）
94dB
Frequency response
150-20,000Hz
Working temperature
-20℃~+40℃
Working hu m idity
Lower than 90%RH(No dew point)
Appearance
Box: wood ,gray white col or
Grid: steel mesh surface treatment, gray w hit e color
Accessories
Screw M4x35 (2pcs)
，
ppearance
Chapter 5: appendix
5.1 Specification
5.1.2 Wall-mounted speaker BS-P678E
，
TOA Corporation 201611
Loading...