Toa BA-800, BA-806, BA-823 Specifications

TOA BA-800 SERIES
DOUBLE CASSETTE PLAYER
BA-800/806/823
BA-800 Stereo Double Cassette Player
DOLBY SYSTEM
DESCRIPTION
TOA’s BA-800 Series of stereo dual cassette players/player amplifiers is ideally suited for locations where enjoyable background or foreground music is desired, including shopping centers, offices, supermarkets and restaurants. The series consists of three models: the BA-823 with a 2 x 30W, 4Ω stereo output; the BA-806, featuring 60W of monaural output at 4Ω, or 10 the BA-800 dual cassette player. Each model is ruggedly constructed to provide dependable performance and extended frequency response, for full-range, natural­sounding playback. The BA-800 Series delivers endless playback of up to two pre-recorded cassettes. A track sequence switch adds variety to double cassette playback. A no-voltage pulse contact is provided for timer control operation. When used with two C-90 tapes, 180 minutes of uninter­rupted BGM/FGM is possible. In addition, four BA-800 units may be linked to provide continuous eight-cassette playing time of 720 minutes. All models are equipped with two CU-800 auto-reverse cassette play modules, which feature Dolby B-type noise reduction and deliver up to 2,000 hours of play time. Each unit houses a switchable AGC (Automatic Gain Control) to
;
25V/83
;
70V outputs; and
BA-806 60W Monaural Double Cassette Player Amplifier BA-823 30W+30W Stereo Double Cassette Player Amplifier
FEATURES
1. Two auto-reverse cassette player modules ensure easy servicing and replacement.
2. Dolby B-type noise reduction.
3. Pulse contact for timer-controlled operation.
4. Track Sequence switch adds playback variety.
5. Units cycle automatically or via external timer for continuous play.
6. Full-range, natural sounding playback. (frequency response: 50—15,000Hz)
7. Built-in AGC circuit maintains constant output levels.
8. Blank Skip function quickly and automatically advances tape to next recorded selection.
9. Rack-mountable with optional bracket kit.
Dolby noise reduction manufactured under license from Dolby Laboratories Licensing Corporation.
Dolby and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.
SPECIFICATIONS
Model No. Power Requirements Power Consumption Output Power Distortion
Frequency Response
Tone Controls
Inputs
Outputs Speaker Output
Line Output
S/N Ratio
Usable Tape Tape Speed Wow and Flutter Playing System Finish
Dimensions Weight Optional Accessory
BA-806
120V AC, 50/60Hz
60W
Less than 1% (1kHz at rate d
output on AUX 2 input)
4Ω/10Ω; 25V/83Ω; 70V
600
Front Panel: Aluminum, alumite process (black)/ABS resin Case: Steel color plate (black)
16.6"(W) x 3.8" (H) x 13.8" (D) (420(W) x 97(H) x 350(D)mm) Approx. 22.7 lbs. (10.3kg) Model MB-25B rack-mounting kit
100W
TAPE: 50—15,000Hz AUX2: 50—20,000Hz (±3dB)
BASS: 100Hz ± 10dB TREBLE: 10,000Hz ± 10dB
MIC: 200 AUX1: 50k AUX2: 600Ω 1V, unbalanced LINK IN (signal): 10 kΩ 150mV, unbalanced
1V, unbalanced
TAPE: 50dB (Dolby NR: OFF), AGC OFF
60dB (Dolby NR: ON), AGC OFF
MIC: 60dB
Compact cassette tapes
4.76cm/sec. Less than 0.2% (WRMS)
Auto Reverse
BA-823
30W+30W
Less than 0.5% (1kHz at rated output on AUX 2 input)
1mV, balanced
100mV, unbalanced
L; 4Ω/R; 4
600
Approx. 19.2 lbs. (8.7kg)
1V, unbalanced
Model No. Power Requirements
Power Consumptio n 8W
Distortion Frequency Response Outputs
S/N Ratio TAPE
Usable Tape
Tape Speed
Wow and Flutter Playing System
Finish
Dimensions
Weight Optiona l Accessory Model MB-25B rack-mounting kit
*Specifications are subject to change without notice
BA-800 120V AC, 60Hz
Less than 3% (Mono line out: 1kHz/1V) 50–15,000 Hz
Mono line out: 60 0Ω 1V, unbalanced Stereo line out: 10 KΩ300mV, unbalanced (L/R)
50dB (Dolby NR: OFF), AGC OFF 60dB (Dolby NR: ON), AGC OFF
Compact cassette tape s
4.76cm/sec Less than 0.2% (WRMS) Auto Reverse Front Panel: Aluminum, alumite prossess
Case: Steel color plate (black)
16.6"(W) x 3.8"(H) x 11.9"(D)
(420(W) x 97(H) x 300(D)mm)
Approx. 13.7 lbs. (6.2kg)
(black)/ ABS resin
APPEARANCE AND DIMENSIONAL DIAGRAM
BA-806
16.54"(420mm)
BA-800
I-
16.54"(420mm)
-i
ARCHITECT’S AND ENGINEER’S SPECIFICATIONS
The equipment for endless playback of pre-recorded cassettes shall be the TOA Stereo Double Cassette Player (BA-800) or Player Amplifiers (BA-806/823). Either one or two cassette tapes shall be used to provide endless play­back. A Track Sequence switch shall select the playback order of tape sides when two tapes are used. A no-voltage momentary contact timer control shall be provided. Two C­90 tapes shall provide up to 180 minutes of uninterrupted playback. In addition, four BA-800 units may be linked to provide continuous eight-cassette playing time of up to 720 minutes. The BA-806 shall have a 60W monaural output,
and the BA-823 shall have 2 x 30W stereo output. The players shall accept Normal, Chrome or Metal cassette tapes. A built-in AGC feature shall reduce variations in the audio output level, and Dolby B-type noise reduction shall reduce tape background noise. A Blank Skip function shall be included to automatically bypass periods unrecorded
1 0
sections more th n deck units shall be designed for easy maintenance and replacement. By using optionally available kits, the TOA BA-800/806/823 shall be able to be mounted on a standard EIA 19" cabinet rack.
seconds long. Removable cassette
16.54"(420mm)
Notes:
1. The recording head’s appro x
(8 hours per day for 500 days) by using two units alternatively.
2. The C-120 tapes (120 minutes’ recording time for both sides) and endless tapes are not recommended because their tapes are extremely thin and can often be slack or twist, leading to unstable operation. The C-90 (90 minutes) and C-60 (60 minutes) are most commonly used.
TOA Corporation
2,000-hour effective playing Iife, expandable to 4,000 hrs
Printed in Japan (502) 833-62-374-40
Loading...