T-Mobile 4G LTE CellSpot Quick Start Manual

Attention: Important Information
This device must be installed at your registered address with T-Mobile. Failure to maintain this address could affect your ability to contact emergency services and result in device deactivation. Visit https://my.t-mobile.com or call CARE at *611 from your handset or 1-800-937-8997 to update the device use address. Don't install this device in a location where there is already strong T-Mobile network coverage.
4G LTE CellSpot
Quick Start Guide
You now have a powerful, simple way to create your own personal T-Mobile 4G LTE mini-tower in your home or small business office. It can provide full bars indoor 4G LTE coverage, more dependable voice calls and more consistent data speeds.
To watch the step-by-step setup video or download the latest quick start guide, scan the QR code or visit http://www.T-Mobile.com/4GLTECellSpotSetup
Reset
1. Press and hold for 5 seconds for reboot
2. Press and hold for 30 seconds for factory setting reset and software update
Yellow WAN Port
(Connect to Wi-Fi router or Wi-Fi cable modem router)
Grey LAN Port
(Connect to other devices if needed)
Power
(Power on when AC Adaptor is plugged in)
Round GPS Port
(Connect to GPS Antenna & Cable)
Stand/Wall Mount
Wall Mounting Kit
CellSpot Device in Stand
GPS Cable Bracket
(Wrap GPS antenna cable here after installation is complete. Leave GPS cable plugged in)
GPS Cable Bracket
What’s Inside
Getting to know your 4G LTE CellSpot
®
Quick Start Guide
(This document)
Stand/Wall Mount
Ethernet Cable GPS Cable Bracket
4G LTE CellSpot Device
AC Power Adaptor
GPS Antenna & Cable (15 ft)
Wall Mounting Kit
(2 Cheese Screws and
2 Wall Anchors)
CellSpot Device with Wall Mount
2
Loading...
+ 2 hidden pages