TMI Tek TCC 100BWU User Manual

Cloud Controller

TMI-Tek

INSTRUCTION MANUAL

Model : TCC-100BWU

Manual Ver1.0.0

2016-11-10

1. Introduction

Thank you very much for purchasing TMI-Tek TCC-100BWU. This operation manual provides

information about the TCC-100BWU, including instructions on how to operate it, a description of

its functionality, and precautions for handling. Before using the product, read this manual carefully

to ensure that you handle it properly. The TCC-100BWU is designed for industrial use and is an

auxiliary relay that is used to wirelessly control the heaters and lighting connected to the main

relay.

1.1 Safety consideration

The following section provides a list of instructions to observe for safely using the product and

avoiding property damage or physical injury to the user and individuals near the product. Do not

handle or operate the unit in a manner which is not described in this operation manual.

[Description of markings]

Marking Explanation

Failure to avoid or perform a specific action may result in property damage

or minor physical harm to the user.

Failure to avoid or perform a specific action may result in death or serious

physical injury to the user.

1 www.tmi-tek.com

a) Do not use this instrument in locations

subject to excessively high humidity, direct

sunlight, or extreme temperatures (lower

than -15°C or higher than 55°C). Doing so

can lead to malfunction.

Avoid using the instrument in the following

locations:

- Locations with an ambient temperature

lower than -15°C or higher than 55°C.

- Locations subject to extreme temperature

changes, or where dew accumulates..

- Locations full of corrosive gases and

combustible gases.

- Locations containing a large number of

conductive materials such as dust, salt,

and iron filings, or locations with a

significant amount of moisture, oil mists,

b) Mount the instrument securely. Avoid

mounting the instrument in an unstable

location, such as an incline or a place

subject to significant vibration.

c) Secure the instrument properly to prevent it

from vibrating.

d) Do not install in metal areas. It may cause

communication failure/disruptions.

e) Please be sure to ventilate properly. Do not

block the ventilation area.

f) Please be cautious of the following in regards

to the adapter

- Damage to the cables can be the cause of

fire and electric shock

- Please do not touch the adapter with wet

hands

- Please do not pull on the cable

and organic solvents.

- Locations subject to vibration.

- Locations exposed to direct sunlight.

- Locations exposed to water.

- Locations exposed to oils or chemicals.

- Locations where a strong magnetic field or

electric field is generated.

g) Failure to follow the instructions in this

operation manual can result in property

damage, serious bodily injury, or even death.

2 www.tmi-tek.com

a) When installing, please keep the power

separated. It may be the cause of electric

shock.

b) If the instrument is dropped or damaged,

switch it off and disconnect the power plug

from the receptacle. Continuing to use the

instrument after it is dropped may result in

fire or electrical shock.

c) If foreign materials, such as water or oils,

enter the instrument, switch off the power

immediately and unplug it from the

receptacle. Continued use may result in fire

or electrical shock.

d) Make sure to leave sufficient space behind

the instrument to allow for instant access to

the power plug in case of an emergency.

e) This instrument is not customer-serviceable.

Attempt to service the instrument on your

own may result in fire or electrical shock.

f) Discontinue using the instrument if any of

the following problems occur:

- The instrument generates unusual noises.

- The instrument produces smoke.

- The instrument develops problems that are

not covered in this manual.

- The instrument cannot be operated as

described in this manual.

1.2 Notes

a) The information in this document is subject to change without notice for the sake of

performance or functional upgrades.

b) This document may not be reproduced, in whole or in part, without prior approval of the

publisher.

c) This product is not responsible for the failure of surrounding equipments.

3 www.tmi-tek.com