Page 1
Revised on : 05 .Jun .2018
SII Products
ANALOGUE QUARTZ
TECHNICAL GUIDE
&
PARTS CATALOGUE
Cal.VD59C
Page 2
[SPECIFICATION]
（φＤ） （
12H－6H
）
（φＤ） （
12H－6H
）
3 Hands ( Hour , Minute , Second )
Chronograph ( Minute , Second , 1/10 second )
Sun & Moon indicator disc
Two pole stepping motor
Step motor 3 pieces
Electronic circuit reset switch
Second setting device
[ Time ]
Indicated by the Hour , Minute , Second and Sun & Moon disc
[ Stop watch ]
Up to 1 minute in 1/10 second ( 2 seconds per round )
Up to 60 minutes in 1 second split time
SR920SW ( SEIZAIKEN ) Silver oxide battery
φ
9.5 × t 2.0 mm
Battery life is approximately 3 years
Use 10-second gate
*Set the winding stem with crown at the normal position
0 Jewel
Outside diameter
Casing diameter
Movement
Movement
size
( 3H - 9H )
φ29.50 mm
×
4.57 mm
26.00 mm
×
Measuring gate by
quartz tester
Battery
Accuracy
PARTS CATALOGUE / TECHNICAL GUIDE
VD59C
Cal. No.
Item
Cal.VD59C
Total height
Version-01
≧
1600 A/m
Additional mechanism
Driving System
Time
indication
Antimagnetic
1
SII Products
Less than ± 20seconds : Monthly rate at normal temperature range
Jewels
―
( 3H - 9H )
φ28.80 mm
× ― × ―
Page 3
Disassembling procedures Figs. Lubricating : Types of oil Oil quantity
Reassembling procedures Figs. Moebius 9010 Normal quantity
Moebius 9030
S-6
Hour, minute
second hands
1025 271
Chronograph minute, second Hour indicator plate ( Sun & Moon disc )
and 1/10 second hands
Dial
0012 079
Auxiliary train wheel bridge screw
0808 368
Support for dial side parts
0126 368
Auxiliary train wheel bridge
0802 368
Date driving wheel
0817 368
Intermediate date driving wheel
0885 002
Intermediate chronograph 0888 009
second wheel Chronograph second wheel
0886 003
0902 008 Intermediate chronograph
Chronograph minute wheel minute wheel and pinion (B)
0886 001
Intermediate chronograph
minute wheel and pinion (A)
0885 002 0271 407
Intermediate chronograph Hour wheel
second wheel
*All parts code are subject to change without notice.
2
SII Products
⑬
⑭
⑮⑪
Version-02
VD59C
PARTS CATALOGUE
①
①
⇒
㊼
㊼
⇒
⑦
⑧
⑫
⑪
⑨
⑩
①
②
③
④
⑤
⑥
Page 4
Battery
0351 177
Winding stem
0012 079
Switch spring screw
0012 079
Switch spring screw
4250 126
Switch spring
0012 079
Train wheel bridge (B) screw
4004 310
0125 331 Circuit block
Train wheel bridge (B)
4270 358
4146 177 Battery connection(-)
Step rotor (B)
4002 923
Coil block (B)
4239 357 0012 079
Rotor stator (B) Train wheel bridge (B) screw
0701 014
Fifth wheel and pinion(B) 0125 331
Train wheel bridge (B)
4146 177
Step rotor (B)
4002 923
Coil block (B)
4249 357
Rotor stator (B)
0701 014
Fifth wheel and pinion (B)
* All parts code are subject to change without notice.
㉓
㉑
㉗
㉙
㉔
㉕
㉖ ㉘
⑱
㉚
⑱
⑲
㉒
⑳
3
SII Products
㉛
㉜
㉝
Version-02
VD59C
PARTS CATALOGUE
⑯
⑰
Page 5
0125 248
Train wheel bridge (A)
0241 178
Fourth wheel and pinion
0701 904
Fifth wheel and pinion (A) 0231 904
Third wheel and pinion
4146 890
Step rotor (A)
0261 150
Minute wheel and pinion
0221 203
Center wheel and pinion
0281 904
Setting wheel
4002 904
Coil block (A)
4239 357
Rotor stator (A)
0391 368
Train wheel setting lever
0383 470
Setting lever
0384 470
Yoke
0282 890
Clutch wheel
*All parts code are subject to change without notice.
㊳
㊸
㊴
㊵
㊶
㊷
Version-04
VD59C
PARTS CATALOGUE
㉟
㉞
㊱
㊲
㊹
4
SII Products
㊺
㊻
㊼
*1
*1
Page 6
・
The explanation here is only for the particular point of Cal.VD59C Tweezers
1.REMARKS ON INSTALLING THE BATTERY
1) After the battery is replaced with a new one or after the
battery is reinstalled following the repairing procedures,
Be sure to touch the short-circuit the AC terminal of circuit
block and the switch spring with conductive tweezers
to reset the circuit as illustrated at right.
2) When the battery replaced with a new one, the time information stored in the built-in IC and
the time indicated by the stopwatch hands do not correspond with each other.
Reset the stopwatch hands to "0" position following the procedure below.
If the stopwatch hands should move improperly, also follow the same procedure.
ORDER
Pull out the crown.
Keep the buttons "A" and "B" pressed at the same time
for 2 seconds, and then, release the buttons.
The stopwatch second hand move back and returned
to where it was.
Press button "A" or "B" to reset the stopwatch second
and minute hands to"0" position.
* By pressing button "A" , set the stopwatch 1/10 second hand.
* By pressing button "B", set the stopwatch second and minute hands.
Turn the crown to set the hour, and minute hands to
the desired time, and push the crown back
to the normal position.
5
SII Products
Version-01
VD59C
TECHNICAL GUIDE
①
②
③
④
A
B
Page 7
1.REMARKS ON INSTALLING THE BATTERY
(1) HAND
・
How to install the hands
Please put on the metal plate so as to
avoid 6 protrusions.(Right figure: place of red circle)
* Install the hour , minute and second hands at the
"12"o'clock position.
* Install the chrono minute and second hands at the
"0"o'clock position.
*Install the Sun & Moon disc so that a moon display
may come to "24" position.
[ Reference ]
The power of press hands
Minute & Hour Hands < 5kg
Second Hand < 5kg
Chrono Minute & Second < 3kg
(2) Battery
・
How to install the battery
Remove the hook of the switch springs battery
clamp portion.
Insert the battery sideways, and have the hook of
the switch springs battery clamp portion catch
the main plate.
Battery clamp position
Hook Main plate
Hook
(3) Winding stem
・
How to remove
While pushing the indented portion of the arrow pull out
the winding stem. Push
②
6
SII Products
Version-02
VD59C
TECHNICAL GUIDE
①
Metal plate
Page 8
Stopwatch 1/10 second hand Sun & moon disc
(Move in 1/10 second increments) (Indicates the time on a 24-Hour basis)
Button "A"
Minute hand In stopwatch function
Hour hand Start / Stop
Stopwatch minute hand First click
(Move in minute increments) Time setting
Second hand Crown at normal position
Stopwatch second hand Button "B"
(Move in second increments) In stopwatch function
Split / Slit release / Reset
*The measurement time indicated by the stopwatch hands that move independently of center hands.
*Stopwatch 1/10 second hand moves for a first minute.
After one minute , it indicates the measurement time when it is stopped.
*If the stopwatch is in use , press the button in the following order to reset it , and then , check if the hands
return to "0" position. (For details , see "HOW TO USE THE STOPWATCH")
* If the stopwatch is counting :
* If the stopwatch is stopped :
* If the split time is displayed :
If either of the stopwatch hands are not in the "0" position , reset them following the procedure below.
Stopwatch 1/10 second hand
Stopwatch minute hand
Crown
Stopwatch second hand
1.Pull out the crown. 2.Press button A or B to reset the 3.Push the crown back to
stopwatch 1/10 second , second
the normal position.
and minute hands to "0"position.
*By pressing button A set the
Stopwatch 1/10 second hand.
*By pressing button B set the
Stopwatch second and minute
hands.
*The stopwatch minute hand moves correspondingly with the stopwatch second hand.
*The hands move quickly if the respective buttons are kept pressed.
B A
B
Before setting the time , check if the stopwatch 1/10 second , second and minute hands are in the "0"(12 o'clock) position.
7
SII Products
B
B
Version-01
VD59C
OPERATION
DISPLAY AND CROWN / BUTTON OPERATION
ADJUSTING THE STOPWATCH HAND POSITION
A
A
B
Page 9
1.Pull out the crown when 2.Turn the crown to set the hour, 3.Push the crown back in to the
the second hand is at the minute hands to the desired time. normal position in accordance
12 o'clock position. As the hour hand moves, the with a time signal.
The second hand will stop Sun & Moon disc also moves
on the spot. correspondingly.
When setting the hour hand,
*Do not press any button. check that the Sun & Moon
Otherwise, the chronograph disc is set property.
hands will move. (Check that AM / PM is set correctly)
・
The measurement time is indicated by the stopwatch hands that move independently of the center hands.
・
The stopwatch can measure up to 60 minutes in second.
(Standard measurement)
Ex) 100m race (Press the buttons in the following order )
Stopwatch minute hand Stopwatch 1/10 second hand
Stopwatch second hand
START STOP (Finish)
8
SII Products
9.8/10 second
RESET (Reset to "0'00")
HOW TO USE THE STOPWATCH
A A B
Version-01
VD59C
OPERATION
TIME SETTING
A A
B
MIN.
Page 10
(Accumulated elapsed time measurement)
Ex) Basketball game (Press the buttons in the following order A / A
･･･
B )
(Start of game) (Time out) (Restart of game) (Game over)
5 minutes 10,8/10 seconds 20 minutes 00 seconds
*Restart and stop of the stopwatch can be repeated as many times as necessary by pressing button A.
(Split time measurement)
Ex) 5,000m race (Press the buttons in the following order B / B
･･･
B )
2 minutes 50 seconds 15 minutes 10,8/10 seconds
* Measurement and release of the split time can be repeated as many times as necessary
by pressing button B.
START STOP RESET
START
SPLIT /
SPLIT RELEASE
A
STOP
RESTART
・・・
A
STOP RESET
9
SII Products
Version-01
VD59C
OPERATION
A A
A A
B
B
A
B
A A
・・・
Loading...