TMEC 125-1, 200-1 Driver Manual

W

ffi

.DRIIVER-

IUI]AN]UAt

FORWARD

Congratulations on having purchased

or being

interested in

our TMECIZ5-I|Z}0-I

motorcycle, a deci-

sion which you

will appreciate more and more as

you

enjoy the style,

economy and reliability of this well-

engineered machine.

This book has been

prepared

to

help you

to understand

the operation,

safety

and maintenarce of TMEC125-1/

200-1.

Please follow the commended check and maintenance method,

as conect usage and maintenance means that

you.

will

be

riding

more safely and enjoy ttre benefits of optimun

performance

while extending the service life. In order

to achieve the best operation

performance,

the vehicle should be checked

and maintenanced by experienced

special maintenance man.

Thank

you

for

your

concerning TMEC125-1/200-1 again.

1. STRUCTURE

AND

PERFORMANCE

FRAME

NO AND ENGINE

NO INSTRUCTION

The

frame No

and the engine

No

are used to

get

motorcycle

license,

register.

The

ftame

no is engraved

on the

profile

of front

pipe.

engraved

on

the lower left

side of crankcase.

SPARE PARTS

LOCATION

mrror

Tuming

signal

indicator

Ignition

Throttle lever

Shift bar

Fr.

pedal

Side stand

helmet

lock

Oil ruler

Fr.

pedal

Rr. Brake

pedal

ACCESSORIES

FLTNCTION
METER AND INDICAIOR
(1).

Speedometer: indicate

the current

speed of vehicle under Km/h

(2).

Tachometer:

record the

collective mileage

of

driving under

Km

(3).

Winker's

indicator

(green):

if open the winker, the indicator

begins

to flash.

(4).

Light-change

indictor

(blue):

when the front light change to

long-distance

lighr, rhe light-change

light

shines.
(5).

Neurral lamp's indicator

(green):

when the engine is at neutral

speed,

the neutral indictor

shine.

(6).

Short-distance meter:

used to record the mile usage of

short-distance

under Km.

(7).

Short-distance reset button:

used to return short-distance meter

to zero.

(3) (4)

(5)

(2)(1)

IGNITION LOCK

Ignition lock is under the

indicator

panel,

three

position:

LOCK, OFF, ON.

When

put

the lock in

ON

position,

the headlight and tail

light

flash. If

your

vehicle stop

and the ignition lock

is in ON

position,

the engine can not run, now

,the

headlight

and taillight remain shine, it will

get

the battery

release

power.

POSITION

FUNCTION REMARK

LOCK

The handlebar is locked, engine
and light can not work

Key

can

be

pulled

out

OFF

Engine and the light can not
work

Key can be

pulled

out

ON

Engine and the light

work

Key can not

be

pulled

out

When the ignition lock is in LOCK

position,

the steering

bar can

be locked.

HELMET LOCK
The helmet lock is under left side cover.
Insert the key, revolve cathode,

hang

the

helmet to hook,

revolve

anode

to lock it,

pull

out the key.

p

Only can use helmet lock after stopping,

Do not

drive when

the helmet

is locked

in the vehicle.

SWITCH ASSY

Left

Switch

Ass)'

Headlight

switch

Push

the light

switch

to

position

to choose

dim light

or high

beam.

Turning

signal

switch

Push

switch le[r

or right. left

or righr

indicator flash.

Horn

Button

Press

horn

button, horn

will sound.

Risht

Switch Assv

Engine

flameout

Switch

Flameout

switch

of engine

is near

throttle bar.

Staft

button

Start

button is

under engine

flameout

switch,

Press

this start

button to

start engine,

now,

the headlight close

automatically,

but the taillight

remain

in

shine.

Head

dim light

u

t.!
.r_l

tr

H

H

FUEL

TANK,

FUEL LOCK

FUEL

TANK The

fuel tank's

max

capacity

is 12L.

including

spare

fuel.

Inset ignition

key,

revolve

anode

to open

the fuel

tank.

After

the fuel

lock open,

pull

it.

After

filling

oil, close

it.

Use

petrol

(90#)

or

above.

V

Gasoline

is inflame.

When adding

oil,

check

engine

whether is switched

off

and fill

at ventilation.

The oil should

be

not exceed

limit

level.

The overflowed

oil should be

cleaned

out'

Oil lock

is under

the left

of fuel

tank, total

three

position.

oFF:If

the oil switch

is in

oFF

position, the

fuel

can not flow into

calbuletol

from

fuel tank.

8

Lay

the oil switch

in OFF position

if

the vehicle is not in

use.

Main fuel

tank: when

the

oil switch in this position,

the fuel

will

flow

into carburetor

from

main oil

path.

Second fuel

tank: when

the

oil switch in this posiiton,

the fuel

will flow

into carburetor

from

the spare oil

path.

Only can

use spare

oil when

the main

oil finished.

User should

add fuel I

time, the

spare oil's

max capacity is 1.5L.

Please check

that whether

the

oil switch is in the main

tank's position

every

time after

you

finish

adding.

If in

second position, you

will use

all without spare

oil.

Check

engine

oil level

Check

engine oil level

before

operating.

Keep center stand

and

the capacity

should be between

upper and

lower

limir.

l.start

engine for

3-5 mins

without loading.

2.stop

engine,

keep motor parking

in horizontal

road.

3.after

2-3 mins, put

out

oil

gauge,

clean it, insert again

but do

not fasten, put

out again,

observe the

oil level,

the level

should

between

the upper and

lower limits.

4.if necessary,

fill

oil to upper

limit, should

not exceed.

5.reinsert

oil

gauge.

6.check the

oil leakase.

TYRE
In order to make sure

of

your

safety

driving,

the tire should adopt

available type

and size.

Correct tyre

pressure will keep the

best driving.

Make sure

of the credibil-

ity of

valve cock, replace

it if necessary.

Should check

tyre

pressure

under

normal

temperature,

if thermal, the de-

gree

will be

higher than normal,

though

you only drive

for few miles

Commended

cold tyre

pressure:

Mend and

Replace tube

Please replace

tyre if the tyre

thread reach

the limit

as follows.

Minlimit

Front:

2mm

rear:

2mm

If the tube is damaged,

please mend it as soon

as

possible. The tube is

not as

good as the new one.

Replace
Commended tyre

type:
Fronr: 110/70-17
Rear:

140/70-17

10

2.

OPERATION

SAFE

DRTVING

l.Before

starting the

engine,

the vehicle

should be checked

to

avoid

components

damage

or accident.

2.The

driver

must be trained

and

must obtain

the driving license.

The

vehicle

is not allowed

to lend

to the

persons

without

license.

3 In order

to refrain

from

hurting

yourself

by other vehicles, you'd

better

set out to

drown others

attention

when

you

are driving,

so, please

no:

put

on the bright colored

costume.

4.Not

be excessively

closed

to

other vehicles.

use the turn

signal

light,

horn etc

device correctly.

5.Obey

by all

local traffic

rules

strictly.

6.Exceed

the speed

limit is

the reasons

of many traffic

accidents,

so,

it is prohibited

strictly.

7.When you

want to change

the

way or turn

the direction,

please

tum

on

the turn

signal light to

draw attenhon

to others.
S.Hold tightly

the steering

bar

and step

on the footrest. The passenger

must arm

the driver's

waist and the

feet

should

step on

the

pillion

footrest.

9.The

good

in vehicle

had

better be light

and should

be tighten

in the

vehicle.

1O.In order

to

guard

the driver

and passenger

safely.

the helmet,

tacemask, gloves

must be worn

when

driving.

11.During

driving,

do not

touch exhaust

muftler, for

its temperature

is high.

11