Air filter and pre-filter inserts, foam (high-volume) (3) (pre-oiled,
assembled) (TRX 2.5, 2.5R, 3.3)
Air filter body (high-volume)/ filter support/ cap/ foam filter, pre-filter/
Maxx® trucks) (TRX® 2.5, 2.5R, 3.3)
Ball bearings (5x11x4mm) (2)
Ball bearings (5x8x2.5mm) (2)
Ball bearings, blue rubber sealed (10x15x4mm) (2)
Ball bearings, blue rubber sealed (5x11x4mm) (2)
Ball bearings, blue rubber sealed (5x8x2.5mm) (2)
Ball bearings, blue rubber sealed (6x12x4mm) (2)
Ball bearings, blue rubber sealed (6x13x5mm) (2)
Ball bearings, blue rubber sealed (8x16x5mm) (2)
Bellcrank bushings (plastic) (5x8x2.5mm) (4)
Antenna caps, vinyl (2)/ antenna spool
Antenna crimp nut, aluminum (blue-anodized)/ antenna nut tools
Antenna crimp nut, aluminum (red-anodized)/ antenna nut tools
Antenna, tube (1)/ vinyl antenna cap (1)/ wire retainer (1)
Battery holder, 4-cell/ on-off switch
Body clip (mounting clip), angled, 90-degrees (10)
Body clip (mounting clip), angled, 90-degrees (black) (10)
Body clips (12) (standard size)
Body clips, heavy duty (12)
Body mount posts, front (2)/ bod y mount, rear/ body mount screw
pins (4)
Body washers, foam adhesive (10)
Body, T-Maxx® (long wheelbase) (clear, requires painting)/
window, lights decal sheet
Body, T-Maxx®, ProGraphix® (long wheelbase) (replacement for
color application)/ window, grille, lights decal sheet
Decal sheet, racing sponsors
Decal sheets, T-Maxx® 3.3 (long wheelbase) (model 4908)
Official Team Traxxas® racing decal set (flag logo/ 6-color)
Tires, rubber (2) (fits Traxxas® wheelie bar wheels)
Wheelie bar arm (1)/ connector (1)/ 3x12 SS (hex drive) (4)
Wheelie bar, assembled (fits all T-Maxx® and E-Maxx® trucks)
Wheels (4)/ axles (2) (for T-Maxx®/E-Maxx wheelie bar)
Wheels, aluminum (blue-anodized) (2)/ 5x8mm ball bearings (4)/
axles (2)/ rubber tires (2)
Wheels, aluminum (red-anodized) (2)/ 5x8mm ball bearings (4)/
axles (2)/ rubber tires (2)
Brake adapter, hex aluminum (blue)
Brake cam (blue)/ cam lever/ 3mm set screw
Brake disc (high performance, vented)
Brake pad set (inner and outer calipers with bonded friction material)
Screws, 3x21mm button-head machine (hex drive) (partially threaded,
Revo brake bolts) (6)
Bulkhead cross braces (2)/ 3x25mm CS screws (8)
Bumper mounts, front (l&r)/ bumper mounts, rear (l&r)/ 3x12mm RHM
screws (8)
Bumpers, 6061-T6, brushed aluminum (f&r)
Bumpers, satin finished (f&r)
Screws, 3x15mm button-head machine (hex drive) (6)
Skidplate, front plastic/ stainless steel plate (black)
Skidplate, front plastic (grey)/ stainless steel plate
Skidplate, rear plastic/ stainless steel plate (black)
Skidplate, rear plastic (grey)/ stainless steel plate
Skidplate, transmission, nylon (grey) (for long wheelbase chassis)
Tires, rubber (2) (fits Traxxas® wheelie bar wheels)
Wheelie bar arm (1)/ connector (1)/ 3x12 SS (hex drive) (4)
Wheelie bar, assembled (fits all T-Maxx® and E-Maxx® trucks)
Wheels (4)/ axles (2) (for T-Maxx®/E-Maxx wheelie bar)
Wheels, aluminum (blue-anodized) (2)/ 5x8mm ball bearings (4)/
axles (2)/ rubber tires (2)
Wheels, aluminum (red-anodized) (2)/ 5x8mm ball bearings (4)/
axles (2)/ rubber tires (2)
Battery holder, 4-cell/ on-off switch
Box, battery (grey)/ adhesive foam chassis pad/charge jack plug
(rubber)
Box, receiver (upper and lower halves)/ clip (1)/ foam pad
Chassis braces, lower (black) (for long wheelbase chassis) (2)
Chassis, T-Maxx®, long wheelbase (extended 30mm) (6061-T6
aluminum, 4.0mm) (blue anodized)
Slide carb linkage bellcrank post/ 5x8x2.5 plastic bushing (2)/
bellcrank/ 5x8x0.5 fiber washer (2)/ 3x10 WM
Tires, rubber (2) (fits Traxxas® wheelie bar wheels)
Wheelie bar arm (1)/ connector (1)/ 3x12 SS (hex drive) (4)
Wheelie bar, assembled (fits all T-Maxx® and E-Maxx® trucks)
Wheels (4)/ axles (2) (for T-Maxx®/E-Maxx wheelie bar)
Wheels, aluminum (blue-anodized) (2)/ 5x8mm ball bearings (4)/
axles (2)/ rubber tires (2)
Wheels, aluminum (red-anodized) (2)/ 5x8mm ball bearings (4)/
axles (2)/ rubber tires (2)
Ball bearings (5x11x4mm) (2)
Clutch bell, (20-tooth)/ 5x8x0.5mm fiber washer (2)/ 5mm E-clip
(requires #4611-ball bearings, 5x11x4mm (2)
Clutch bell, (22-tooth)/ 5x8x0.5mm fiber washer (2)/ 5mm E-clip
(requires #4611-ball bearings, 5x11x4mm (2))
Clutch bell, (24-tooth)/ 5x8x0.5mm fiber washer (2)/ 5mm E-clip
(requires #4611-ball bearings, 5x11x4mm (2))
Clutch shoes (2)/ spring (T-Maxx®/Revo®/Jato®/Nitro 4-Tec®)
Flywheel (large, knurled for use with starter boxes)
Flywheel nut (TRX® 2.5, 2.5R, 3.3)
Flywheel with magnet (35mm)
PTFE-coated washers, 5x8x0.5mm (20) (use with ball bearings)
Ball bearings, blue rubber sealed (10x15x4mm) (2)
Ball bearings, blue rubber sealed (6x12x4mm) (2)
Ball bearings, blue rubber sealed (8x16x5mm) (2)
Carrier, differential/ x-ring gaskets (2)/ ring gear gasket/ 6x10x0.5 TW
Differential oil kit (1 each: 10K, 30K, 50K weights)
Gear set, differential (output gears (2)/ spider gears (2)/ spider gear
shaft/ diff carrier support)
Housings, differential (left & right)/ pinion collar (1)
Oil, differential (100K wt) (0.7 oz (20cc))
Oil, differential (10K wt)
Oil, differential (30K wt)
Oil, differential (500K wt)
Oil, differential (50K wt)
Ring gear, differential/ pinion gear, differential
Ring gear, differential/ pinion gear, differential (machined, spiral
cut) (front)
Screws, 2.5x8mm cap-head machine (6)
Axle carriers, left & right (1 each)
Axle carriers, left & right (1 each) (use with larger 6x13mm ball
bearings)/ bearing adapters (for 6x12mm ball bearings) (2)/ dust
boot retainers (4)
Boots, driveshaft (rubber) (2)
Drive cups, inner (2) Revo®/ E-Revo® (first generation)/ TMaxx®/ E
M4/15 (2)
Driveshaft assembly (1), left or right (fully assembled, ready to install)/
4x15mm screw pin (1)
Driveshaft, steel constant-velocity, Revo®/E-Revo® (first
generation)/T
pin (1)
Driveshafts, Revo®/ E-Revo® (first generation)/ T-Maxx®/ E-Maxx
(steel constant
(for models w/ 6mm axles) (4)
T-Maxx (Model 49077-3) Parts List
Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically.
T-Maxx® filter base (angled)/ wire mount/ hardware (1 each) (Fits
painted body. Graphics are painted, requires paint and final
-Maxx (steel constant-velocity driveshafts)/ screw pin,
For assistance, call 1-888-TRAXXAS, or e-mail Traxxas anytime at support@Traxxas.com REV. 210120 1415
-Maxx®/E-Maxx (shaft only, 128.5mm)/ drive cup
-velocity) (assem bled w/inner & outer dust boots)
Page 2 T-Maxx: TRX 3.3, TQi 2.4GHz Radio System, Traxxas Link Wireless Module, & TSM (Model 49077-3) Parts List
Half shafts, center front (Revo 3.3) (internal splined (1)/ external
Pins, axle (2.5x12mm) (4)
Rebuild kit (for Revo®/E-Revo® (first generation)/T-Maxx®/E-
dustboots, & lube for 2 driveshafts assemblies)
Screw pins, 4x13mm (with threadlock) (4)
Stub axle, (1)/ axle sleeve (1) Revo®/T-Maxx®/E-Maxx (steel
constant-ve locity drives haft)
U-joints, driveshaft (carrier (4)/ 4.5mm cross pin (4)/ 3mm cross pi n
(4)/ e-clips (20)) (metal parts for 2 driveshafts)
Wheel hubs, hex (2)/ axle pins (2.5x12mm) (2)
Wheel hubs, hex, 6061-T6 aluminum (blue) (4)/ axle pins
(2.5x10mm) (4)
Wheel hubs, splined, 17mm (blue-anodized) (4)/ wheel nuts,
Wheel hubs, splined, 17mm (green-anodized) (4)/ wheel nuts,
Wheel hubs, splined, 17mm (red-anodized) (4)/ wheel nuts,
Wheel nuts, splined, 17mm (blue-anodized) (4)
Wheel nuts, splined, 17mm (green-anodized) (4)
Yoke, brake (1)/ torque pins (2)/ 4x15mm screw pin
Yokes, differential and transmission (2)/ 4x15mm screw pins (2)
Yokes, stub axle (2)/ pins (2)
Engine mount, aluminum/ 3x10 CS with washers (8)
Engine mount, machined 6061-T6 aluminum (blue) (w/ screws)
(T-Maxx® Series)
Screws, 3x10mm cap-head machine (hex drive) (6)/ lock washers (6)/
hex wrench
Servo mounts, steering/ shift (f&r) (black)
Servo mounts, steering/ shift (machined aluminum) (blue) (f&r)/
machine screws (8)
Servo mounts, steering/shift (f&r)(grey)
Servo mounts, throttle/ brake (machined aluminum) (blue) (f&r)/
machine screws (8)
Servo mounts, throttle/brake (1) (grey)
Cooling head, PowerTune (machined aluminum, bl ue-anodized)
(TRX® 3.3), head protector (1), 3x6mm CCS (5)
Glow plug, super-duty (long-medium)/gasket
Head protector, cooling head (1)/3x6mm CCS (5) (TRX® 3.3)
Piston/sleeve (matched set), wrist pin clips (2) (TRX® 3.3)
Roller clutch/ 6x8x0.5 TW (1) (also called one-way bearing) (TRX 2.5,
2.5R, 3.3)
Screws, 3x10mm flat-head machine (hex drive) (4)
Screws, 3x6mm flat-head machine (hex drive) (6)
Shaft, starter (TRX® 2.5, 2.5R, 3.3)
Starter, recoil (complete with screws) (TRX 2.5, 2.5R, 3.3)
Cable ties, medium (black) (6)
Fittings, inlet (nipple) for fuel or water cooling (2)
Hanger, metal wire (for Resonator pipe in T-Maxx® with long
wheelbase)/ telemetry sensor wire hold-down clip
Header, aluminum (T-Maxx®) (for rear exhaust engines only) (TRX
2.5, 2.5R, 3.3)
O-ring, header 12.2x1mm (TRX® 2.5, 2.5R, 3.3)
Pipe coupler, molded (for use with pipes 5152 (T Maxx) & 4452R)
(TRX 2.5, 2.5R, 3.3)
Screws, 3x10mm button-head machine (hex drive) (6)
Screws, 3x15mm cap-head machine (hex drive) (with split and flat
washers) (6)
Tuned pipe, Resonator, R.O.A.R. legal (aluminum, double-chamber)
(fits T-Maxx® vehicles with TRX® Racing Engines)
EZ Start 2 & Related parts
Connector, wiring harness (EZ-Start® and E Z-Start® 2)
Control box (complete) (EZ-Start® 2)
Control box battery cover w/ belt clip (EZ-Start® 2)
Cush-drive elements (4) (EZ-Start® 2)
EZ-Start® 2, complete system with controller, drive unit, wiring
harness
Gear set (complete) (EZ-Start® 2)
Housing set (inner, outer)/ 3x12mmBCS (5)/ 3x20BCS (1)/ motor
bushing (EZ-Start® 2)
Lead wire, glow plug (blue) (EZ-Start® and EZ-Start® 2)
Lead wire, glow plug (blue) (EZ-Start® and EZ-Start® 2)/ molex
pin extractor (use where glow plug wire does not have bullet
connector)
Motor (hi-torque)/ pinion gear/ motor bushing (EZ Start 2)
Roller clutch/ 6x8x0.5 TW (1) (also called one-way bearing) (TRX 2.5,
2.5R, 3.3)
Screws, 2.6x8mm countersunk machine (6)
Screws, 3x12mm button-head machine (6) (starter attachment screws
with threadlock)
Screws, 3x12mm button-head machine (hex drive) (6)
Shaft, starter (TRX® 2.5, 2.5R, 3.3)
Front Suspension & Steering
Aluminum caps, pivot ball (blue-anodized) (4)
Axle carriers, left & right (1 each) (use with larger 6x13mm ball
bearings)/ bearing adapters (for 6x12mm ball bearings) (2)/ dust
boot retainers (4)
Ball bearings (5x8x2.5mm) (2)
Bellcrank posts, aluminum (2)/ steering link threaded rod (3x25mm)/
long rod ends (2)
Bulkhead cross braces (2)/ 3x25mm CS screws (8)
Bulkheads (l & r) (front) (grey)
Caster spacers (4)/ shims (4)
Hollow ball, tall centered (2)/ tall offset hollow ball (2)/ bump steer
adjustment shims; 3.5mm (2), 1.17mm (2)
Pivot ball caps (4)/ dust boots, rubber (4)/ dust plugs, rubber (4)/ dust
boot retainers, black (4), blue (4) (2 pkgs. req. to complete truck)
Pivot balls (4)/ pivot ball cap bushings (4)
Pivot balls, hard-anodized 7075-T6 aluminum (4)/ pivot ball cap
bushings (4)
Rod ends, Revo® (large) with hollow balls (12)
Rod ends, short (6)/ hollow balls (6)
Screws, 3x10 flathead machine (hex drive) (4)
Servo horns, steering, long (2), short (2)/ linkage, steering (3x20mm
turnbuckle) (2)/ rod ends (short) (4)/ hollow balls (4)
Servo, digital high-torque (ball bearing)
Shock tower (for rectangular body posts)
Steering bellcranks/ servo saver/ servo saver spring/ servo spring
retainer (requires 5x11mm BB (2))
Suspension arms (lower) (2) (fits T-Maxx®/E-Maxx)
Suspension arms (upper) (2) (fits T-Maxx® /E-Maxx)
Suspension screw pin set, hardened steel (hex drive)
Toe links, T-Maxx®/E-Maxx (TUBES black-anodized, 7075-T6
aluminum, stronger than titanium) (112mm, front) (2)/ rod ends
(4)/ aluminum wrench (1) (For T
pivot ball suspension & 3.8' wheels)
Toe links, T-Maxx®/E-Maxx (TUBES red-anodized, 7075-T6
aluminum, stronger than titanium) (112mm, front) (2)/ rod ends
(4)/ aluminum wrench (1) (For T
pivot ball suspension & 3.8'' wheels)
Turnbuckles, toe links (5.0mm steel) (front) (2)
Fuel tank rebuild kit (contains cap, foam washer, o-ring, upper/lower
retainers, screw, spring and screw pin)
Heat shield tubing, fiberglass (2) (black)
Fuel, Lubricants & Supplies
Bottle, fuel filler (500cc)
Glow plug, super-duty (long-medium)/gasket
Rebuild kit, fuel filler bottle (includes bottle lid (1) and dispensing tube
caps, rubber (2) (fits 8mm or 5/16" dispensing tube))
Top Fuel®, 20% nitro (gallon)
Top Fuel®, 20% nitro (quart)
Top Fuel®, 33% nitro (gallon)
Top Fuel®, 33% nitro (quart)
Antenna crimp nut, aluminum (blue-anodized)/ antenna nut tools
Antenna crimp nut, aluminum (red-anodized)/ antenna nut tools
Body clip (mounting clip), angled, 90-degrees (10)
Body clip (mounting clip), angled, 90-degrees (black) (10)
Body clips (12) (standard size)
Body clips, heavy duty (12)
Bulkhead cross braces (2)/ 3x25mm CS screws (8)
splined (1)/ center rear (internal splined (1)/ external splined (1))
Maxx steel constant-velocity driveshafts) (includes pins,
splined, 17mm (blue-anodized) (4)/ screw pins, 4x13mm (with
splined, 17mm (blue-anodized) (4)/ screw pins, 4x13mm (with
splined, 17mm (red-anodized) (4)/ screw pins, 4x13mm (with
-Maxx®/E-Maxx models w/sealed
-Maxx®/E-Maxx models w/sealed
REV. 210120 1415