Tko Sports Group 9GU Assembly Manual
ASSEMBLY MANUAL
9GU - COMMERCIAL UPRIGHT BIKE
2
IMPORTANT SAFETY INSTRUCTIONS
• Read this Owner’s Manual and follow it’s instructions carefully before using the
machine. Make sure that it is properly assembled and tightened before each use.
• Inspect your machine prior to exercise to ensure that all nuts and bolts are fully
tightened.
• Replace the worn parts immediately.
• Most exercise equipment is not recommended for small children. Children should not
use the machine unless they are under adult supervision.
• Exercise equipment has moving parts. In the interest of safety, keep others,
especially children and pets, at a safe distance while exercising.
• Warm up 5 to 10 minutes before each workout and cool down 5 to 10 minutes
afterward. Never hold your breath while exercising.
• Rest adequately between workouts. Muscles tone and develop during these rest
periods. Beginners should work out twice a week and increase gradually to 4 to 5
times per week.
• Remove all jewelry, including rings, chains and pins before commencing exercise.
• Never exercise in bare feet or socks, always wear correct footwear, such as running, walking,
or cross-training shoes.
• Always wear suitable clothing and footwear during exercise. Do NOT wear loose
fitting clothing that could become entangled with the moving parts of your exercise
machine.
MEDICAL WARNING
• Before beginning any exercise program, consult your personal physician. Evaluate
your present fitness level and determine the exercise program that is most
appropriate for your particular age and condition.
• If you experience any pain or tightness in your chest, irregular heartbeats, shortness
of breath, faintness or other unusual discomfort while exercising, stop and consult
your physician before continuing.
Maximum recommended exercise weights not to exceed 400Lbs (181.8Kgs)
3
4
BEFORE YOU BEGIN
Note: Before you begin, remove all parts and hardware from the carton, ensure you
have everything according to the list.
TOOLS NEEDED FOR THE ASSEMBLIES (INCLUDED)
T-HANDLE SOCKET
WRENCH (17MM)
ALLEN WRENCH
(M5 & M6)
SOCKET WRENCH
COMBINATION
WRENCH
Handlebar
Arm Rest Pad
Console
Seat Adjustment
Handle
Console Bracket
Upright Post
Seat Cap
Crank Cover
Upright Sleeve
Main Frame
Right Pedal
Front Stabilizer
Rear Stabilizer
Floor Leveler
Water Bottle
Holder
Seat
5
HARDWARE
This chart below is provided to help identify the hardware used in the assembly process.
Use the circles below to confirm the diameter of each Washer, Bolt and Screw.
Use the small ruler to check the length of the bolt and screw.
NOTICE: The length of the bolt or screw DOES NOT the head to the bolt
or screw.
After unpacking the unit, open the hardware bag and make sure that you have all the following items. Some
hardware may be already attached to the part.
Part Number
Description
Qty
78
Lock Washer (M8)
4
73
Washer (8x38x2.0t)
4
83
Screw, Round Head (M5xp0.8x15mm)
12
84
Screw, Round Head (M5xp0.8x50mm)
2
88
Bolt, Button Head (M6xp1.0x12mm)
2
97
Bolt, Hex Head (M8xp1.25x65mm)
4
99
Bolt, Hex Head (M10xp1.5x50mm)
2
Loading...