Step2] Set the channel of the two microphones using the
microphone's keypad.
CHANNEL SETTINGS
For the first(1st) microphone:
1) Turn on the microphone by pressing the button.
2
) Separate the battery cover from a microphone.
(Refer to “How to change batteries” in the manual)
4) Press [RES] button on the remote control.
The microphone LED will be turned on and off twice.
5) Press the same channel number that you set in the main player.
The microphone LED will be turned on and off twice.
6) Press [REC], Microphone LED will be turned on and off twice.
7) Press [MENU]button to save.
Microphone LED will be turned on and off 6 times.
8) If a wireless microphone is successfully connected to the main unit,
LED of MIC1 on the main unit will will be on.
For the second (2nd) microphone:
1) Turn on the microphone by pressing the button.
2) Separate the battery cover from a microphone.
3) Prepare a remote control and set as above picture and follow the below
steps from 4) to 7).
4) Press [RES] button on the remote control.
The microphone LED will be turned on and off twice.
5) Press the same channel number that you set in the main player.
The microphone LED will be turned on and off twice.
6) Press [APPLAUSE], Microphone LED will be turned on and off twice.
7) Press [MENU]button to save.
Microphone LED will be turned on and off 6 times.
8) If a wireless microphone is successfully connected to the main unit,
LED of MIC2 on the main unit will will be on.
3) Prepare a remote control and set as shown
on the left and follow the below steps from
4) to 7).