TJERNLUND 950-0685 SS1 DRIP DEFLECTOR KIT 8504065 REV 0495, 950-0685 Installation Instructions Manual
TJERNLUND PRODUCTS, INC.
1601 Ninth Street • White Bear Lake, MN 55110-6794
PHONE (800) 255-4208 • (651) 426-2993 • FAX (651) 426-9547
Visit our web site • www.tjernlund.com
(950-0685) TERMINUS DRIP DEFLECTOR KIT
KIT INCLUDES: (1) Terminus Drip Deflector
INSTALLATION STEPS
1.) Remove bottom screw from Terminus. Be careful not to lose spacer
between Terminus flanges.
DIAGRAM A
2.) Remove caulk from bottom of Terminus between interior flange and wall.
DIAGRAM B
3.) Insert Drip Deflector between Terminus interior flange and wall. Hole
in Drip Deflector must line up with holes in Terminus flanges, (Diag. A).
4.) Reinstall screw removed in step 1. Make sure spacer is still between
Terminus flanges, (Diag. A)
5.) Apply caulk around Drip Deflector and Terminus interior flange, (Diag. B).
REV. 4/95 © 1995 Tjernlund Products, Inc. All rights reserved. P/N 8504065
Loading...