TiVo Solutions d b a TiVo TCDA93000 Users Manual

Product Safety information

Download PDF (assets/files_assets/TiVo-

Product-Safety_0.pdf) | Print

FCC statement to the user

Download PDF

(/assets/files_assets/FCC_Statement_0.p
df) | Print

TiVo Product Safety and Compliance Information

Quicklinks: Produ ct Safety Info rmation | FCC Statement

This product was designed a nd manufactured to meet strict quality and sa fety standards. There are, however, some installation and opera tion
precautions of which you should be particularly aware. Pleas e read these instructions before opera ting the product and save them for future reference.

1. Read Instruction s — All the sa fety and operating instructions should b e read and understood before the product is operated .

2. Retain Instruction s — The safety a nd operating instructions should be retained for future reference.

3. Heed Warnings — All warnings on the p roduct a nd in the operating instructions should be followed.

4. Follow Instruction s — All operating and use instructions should be followed.

5. Avoi d Water and Moisture — T he product should not be used near water - for examp le, near a ba thtub, was hbowl, kitchen sink, laundry tub, in a wet

baseme nt, near a swimming pool, etc.

6. Produc ts – A product and cart combination should be moved with ca re. Quick stops, exc essive force, and uneven surfac es may cause the product
and c art combination to overturn.

7. Tilt/Stability — All televisions must comply with recommended international global sa fety standards for tilt and stability properties of their ca binet
design. Do not compromise these d esign standards by app lying excessive pull force to the front or top of the cabinet; this could ultimately overturn the
product. Also, do not enda nger yourself, or children, by placing electronic equipment/toys on top of the ca binet. Such items could unexpected ly fall from
the top of the set a nd cause p roduct da mage and/or p ersonal injury.

8. Avo id Heat — T he product should be s ituated a way from heat sources such as radiators, heat registers, stoves, or other products (including amp lifiers)
that produce hea t.

9. Ventil ation — The app liance should be situated so that its location or position does not interfere with its proper ventilation. For example, the a ppliance
should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation openings; or, placed in a built-in installation, such as a bookcase
or cabinet that may impede the flow of air through the ventilation openings. Do not block ventilation holes by plac ing items s uch as magazines, clothing,
etc., on top of the unit.

10. Power Cord P rotection — Power supply cords should b e routed s o that they a re not likely to be walked on or pinched by items plac ed upon or against
them, paying p articular attention to cords and plugs, convenience recep tacles, and the point where they exit from the p roduct.

11. Object and Liquid Entry — Never push objects of any k ind into this p roduct through cabinet s lots as they ma y touch da ngerous voltage points or short
the parts, res ulting in the risk of f ire or electric s hock. Never s pill liquid of any kind on this p roduct.

12. Damage Requiring Service — The product should be serviced by q ualified service personnel when:

A. the power supply cord or plug is damaged or frayed;
B. liqu id has spilled into the product;
C. th e product has been exposed to rain or water;
D. th e product does not operate normally when you follow the operating instruction s (adjust only those controls that are discussed in this guide, as improper

adjustment of other controls may result in damage, often requiring extensive work by a qualified technician to restore the product to normal performan ce);

E. t he product has been dropped or the cabinet damaged;

F. th e product exhibits a distinct change in performance.

13. Servicin g — The user s hould not attempt s ervice to the p roduct b eyond that d escribed in the Troubleshooting section of this guide. All other servicing
should be referred to qualified service p ersonnel.

14. Cleaning — Unplug this p roduct from the wa ll outlet before clea ning. Do not use liquid c leaners or aerosol cleaners; use a damp cloth for cleaning. If the
product comes in contact with a ny liquid, unplug the p ower cord or a dapter and let the unit dry thoroughly before plugging it b ack in.

15. Power Su pply — Only use UL approved p ower supp lies or ca bles.

Premiere Serie s: Power cord minimum 18A WG, 125V, 10A and max 4.5m long.
Roamio: Kun antech Co., Ltd. (TiVo) model KSAS0241200200VU power supply.
Roamio Plus/Pro: Power cord with minimum 18AWG, 125V, 10A and max 4.5m long.
TiVo Mini and TiVo Stream: Power supply with rated output 12V, 1A; Marked LPS.

16. Overloaded Power Outlets — do not overload wall outlets and extension cords a s this can result in the risk of fire or electric shock.

17. Co axial C able Groundi ng — For this product, the c oaxial cable shield/screen shall be grounded a s close as p ractical to the point of entry of the cab le

into the building. For products sold in the US and Ca nada, this is p er Article 800-93 and Article 8 00-100 of the NEC (or Ca nadian Electrical Code Part 1),
which provides guidelines for proper grounding of the coaxial c able shield.

18. Electric Shock — To reduce the risk of electric shock, do not disa ssemble this product. Ta ke it to a qua lified s ervice person when service or repa ir
work is required. Opening or removing covers ma y expose you to dangerous voltage or other risks. I ncorrect reass embly can ca use electric shock when this
product is s ubsequently used.

19. CAU TION — Danger of explosion if the b attery is incorrectly replaced. Replace only with the same or equivalent typ e recommended by the
manufacturer. Dispose of used batteries according to the ma nufacturer's instructions.

This equipm ent has been tested and found to comp ly with the limits for a Class B d igital d evice, p ursuant to Part 15 of the FCC Rules. These limits are
designed to p rovide rea sonable protection against ha rmful interference in a residential installation. This equipment generates, uses and can ra diate radio
frequency energy a nd, if not installed a nd used in ac cordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this eq uipment d oes ca use harmful interference to radio or television
reception, which can b e determined by turning the equipment off and on, the user is encouraged to try to correct the interference b y one of the following
measures:

DI SC OV ER TI VO SHO P PRO DU CTS F IND S HO WS M Y AC COU NT SUP PO RT

ACTIVATE A TIVO DEVICE (/TIVO-MMA/MMA-ACTIVATE/ACTIVATESERVICE.DO)

0

Sign in

Reorient or relocate the receiving antenna.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Increase the separation between the equipment and receiver.
Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any cha nges or modifications not expressly app roved b y the party responsible for complia nce could void the user's authority to operate this
equipment.

This device complies with Part 15 of the FCC Rules. Opera tion is subjec t to the following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accep t any interference received, including interference that may cause undes ired opera tion.

FC C Ra d ia tio n Ex po su re St at em en t

This equipm ent complies with FCC ra diation exposure limits set forth for an uncontrolled environment. End users must follow the specific op erating
instructions for satisfying RF exposure compliance. To ma intain compliance with FCC RF exposure comp liance requirements, please follow operation
instructions as documented in this ma nual.

This transmitter must not b e co-located or opera ting in conjunction with any other antenna or transmitter.

This equipm ent should b e installed and opera ted with a minimum d istance of 20 cm between the rad iator and your body.

The availa bility of some specific cha nnels and /or operational freq uency bands a re country dep endent and are firmware programmed a t the factory to
match the intended destination. The firmware setting is not acc essible by the end user.

Compliance Information

Model numbers: TCD846500 (Roamio), TCD8 48000 (Roamio Plus); TCD840300 (Roamio Pro); RC30A00, RC30B00 (Remote), TCDA92000, TCDA93000
(Mini), TCDA94000 (Stream)

Askey International Corporation

800 Corporate Way, Suite B
Fremont, CA 94538

Model numbers: WLU5054 (Roamio), WLU5200 (Roamio Plus/Pro)
FCC IDs: H8N-WLU5054 (Roamio), H8N-WLU5200 (Roamio Plus/Pro)

RF Radiation Hazard Warning

To ensure compliance with FCC and Industry Cana da RF exposure requirements, this device must be installed in a location where the antennas of the
device will have a minimum distance of at least 20 cm from a ll persons. U sing higher gain antennas and types of antennas not certified for use with this
product is not allowed. The device shall not be co-located with another transmitter.
Installez l'ap pareil en veillant à conserver une d istance d'au moins 2 0 cm entre les éléments rayonnants et les personnes. Cet avertissement de sécurité
est conforme aux limites d 'exposition définies p ar la norme CNR-102 at relative aux fréquences radio.

Industry Canada Notice and Marking

Under I ndustry Canada regulations, this radio transm itter may only operate using a n antenna of a type and maximum (or lesser) ga in approved for the
transmitter by I ndustry Canada. T o reduce potential ra dio interference to other users, the a ntenna type and its gain should b e so chosen that the
equivalent isotropically rad iated power (e.i.r.p.) is not more than that necess ary for successful communication.
Conformément à la réglementation d'I ndustrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un typ e et d'un gain maxima l (ou
inférieur) approuvé pour l'émetteur pa r Industrie Canad a. Dans le but d e réduire les risques de brouillage radioélectrique à l'intention des a utres
utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée éq uivalente (p.i.r.e.) ne dép asse pas l'intensité
nécessaire à l'établissement d'une communication sa tisfaisa nte.

This device complies with Industry Canad a licence-exempt RSS standa rd(s). Operation is subject to the following two conditions: (1) this d evice may not
cause interference, a nd (2) this device must accept any interference, including interference that may cause undes ired operation of the device.
Le prése nt ap pareil est conforme aux CNR d 'Industrie Canada applicables aux appa reils radio exempts de licence. L'exploitation est autorisée aux d eux
conditions suivantes : (1) l'ap pareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'ap pareil doit accep ter tout brouillage rad ioélectrique subi,
même si le brouillage es t suscep tible d'en compromettre le fonctionnement.

FCC IDs: TGN-TCDA93000 (Mini), TGN-TCD8465 (Roamio), TGN-TCD8400 (Roamio Plus/Pro), TGN-RC30 (Remote)

Canada Compliance