Tivax HiRez 7 User Manual

Tivax HiRez7 Docking Station User’s Guide

Congratulations on your selection of the HiRez7 digital television and docking station! In order to optimize
your use of these products, please consider the following:

This docking station (DS) is designed as a holder for the HiRez
and work with 8 AA batteries or 2 Li-Ion batteries to provide power for the TV when no other power source
is available such as in a power outage. In addition, it also offers enhanced sound for the TV as well.

1. Getting set up:

z Identify the 2 cables (1 power cable and 1 audio cable) provided with your docking station.
z Place the HiRez

7

portable TV in the docking station. It will fit snugly.

7

portable TV, charge the Li-Ion batteries,

2. Use the DS to power the TV

①

LED light (Charging) A①②udio input ③ AA battery output DC 12V input④

a) Using the external power su pply

z Connect the power supply (comes with the HiRez
z For enhanced sound, connect the included audio cable to the Audio input on the docking

station ② and to the headset input on the TV (top input on the right side).

z Turn the TV on and refer to the operating procedures in the TV’s users’ manual.

② ③

7

) to the DC 12 V input of the DS ④

④

www.tivax.com

b) Using AA batteries

z When no other power source is available, you may choose to use AA batteries.
z Remove the battery cover at the rear of the DS by pulling the battery compartment tab

toward you.

z Install 8AA regular batteries in the rear of the docking station making sure the battery

terminals +/- match the +/- signs on the bottom of the docking stations to ensure correct
electrical polarity.

z Attach the included power cable to the AA Battery Out on the DS ③ and to the AA Battery

In on the Hi-Rez

z Turn the TV on and refer to the operating procedures in the TV’s users’ manual.

7

TV.

3. Use the DS to charge the Li-Ion batteries

Note: Please remove the AA batteries from the unit. The Li-Ion batteries will not charge if AA
batteries are inserted in the unit.

1) Installing the Li-Ion batteries (in the docking station)

z Remove the battery cover from the bottom of the docking station.
z Remove A. and B Li-ion batteries from the portable TV.
z Insert A and B Li-ion batteries in the opening at the bottom of the docking station making sure the

battery terminals +/- match the +/- signs on the battery cover to ensure correct electrical polarity.
Please note the batteries are different in size and will only fit in appropriate charging
compartment.

z Place battery cover back by pressing down and pushing into the slot.
z Connect power adapter to docking station and to the power supply.

 Note: If the Li-ion battery is not placed correctly in the docking station, the LED light will be

flashing red.

z LED light will turn red (no flashing) during the time batteries are being charged.
z LED light will turn green when batteries are fully charged.

Note: Unplug the power adapter if the machine is not being used.

www.tivax.com