Titon-Blue TR-M336 User Manual
TR-M336 Titon-Blue
Please read the manual before installing and using this lighting
Keep it for future reference
LED Moving head
User manual
TR-M336
Introduction
Thank you for using our products!
TR-M336 is a very small and light LED Moving head light, its weight is only 3.6 kg. Its beam is very narrow and very
bright . It runs extremely fast. It is suitable for bar, disco, stage , decoration ,etc .
This product complies with the following standards:
IEC60598-1:2003
IEC60598-2-17:1984+A2:1990
Main features
36 Pcs high-power 3W CREE XP-E LED
Excellent mixed color system
Linear colour temperature adjustment, dimmer very smooth
Calibrate colors function
Tight, punchy beam
compact，silent design
Speedly
Blue LCD display
Standar DMX-512 communication protocol
Easy for power connection
Overview and Dimensions
All dimensions are in millimeters
Safety information
important
Every person involved with the installation , operation and maintenance of this device has to be qualified and follow the
instructions of this manual . Manufacturer will not with responsibility for those operation not according to this Instruction
Verify that the voltage matches the rated voltage.
When the voltage is 110V , Do not connect more than 10 lightings in total to AC mains power in one interconnected
daisy chain
When the voltage is 220V , Do not connect more than 20 lightings in total to AC mains power in one interconnected
daisy chain
Before using the fixture, check that all power distribution equipment and cables are in perfect condition and rated for
the current requirements of all connected devices.
Always ground (earth) the fixture electrically .
Avoiding hit the Light when you are move or install the light .
The minimum distance between light-output and the illuminated surface must be more than 0.5 meters. Keep all
combustible materials (for example fabric, wood, paper) at least 0.2 meters away from the fixture .
Do not expose the fixture to rain or moisture.
Avoid looking directly into the light source (especially those who suffer from epileptic fits)
Maximum ambient temperature (Ta) is 40°C. Do not operate fixture at temperatures higher than this .
The Maximum surface temperature is 50°C
When suspending the fixture above ground level, verify that the structure can hold at least 10 times the weight of all
installed devices.
Verify that all external covers and rigging hardware are securely fastened and use an approved means of secondary
attachment such as a safety cable.
Power connection
Installing a Neutrik connector on a power cable
The blue NAC3FCA connector is the power input connector, the light gray connector is the power output
connector
Select a three conductor 2.5mm
2
power cable
Install the Neutrik connector on the power cable , the below table shows the color-coding schemes and some
possible pin identification schemes; if pins are not clearly identified , or if you have any doubts about proper
installation , consult a qualified electrician
Wire color
Conductor
Symbol
DMX protocol
TR-M336 has five Channels modes , including:
Brown
Live
L
Blue
Neutral
N
Yellow/green
ground
Relaying power to other devices
The lightings can be linked in a chain by power
cables which installed a blue and a light-gray
connectors on the two ends. the light-gray connector
connects to the power out socket of the first lighting ,
and the blue connector connects to the power in
socket of the subsequent lighting, and so on.
The power cable must is a three-conductor
2.5mm2 cable
When the voltage is 110V , Do not connect more
than 10 lightings in total to AC mains power in
one interconnected daisy chain
When the voltage is 220V , Do not connect more
than 20 lightings in total to AC mains power in
one interconnected daisy chain
Loading...