TITLE Platinum PFGT Operating Instructions Manual

PROFESSIONAL FIGHT

& GYM TIMER

OPERATING INSTRUCTIONS

PFGT

OPERATING INSTRUCTIONS:

NOTE: The TITLE Platinum Professional Fight & Gym Timer has a multitude of functions and

operating options. It can be a little intimidating when initially setting up the timer for your
specific requirements and needs, but follow the PROGRAMMING and EXAMPLES OF
PROGRAMMING below in the manual and it is laid out clearly. Determine your programming
demands, read through the instructions and follow the directives to programming the timer.

Be sure to keep this Owner’s Manual in a secure place after initial setup for any future

questions, timing options, and programming changes, revisions and/or additions that are
needed.

FUNCTIONING: The Platinum Timer is ideal for all training sessions and competitions in boxing,

MMA, grappling, wrestling, combat sports, fitness classes, athletic events, school activities and
much, much more.

The timer is manufactured to show the time of one or more cycles, composed of Time of Action
(Round Time), Time of Pause (Rest Time), Number of Cycles (Number of Rounds), Time of Final
Pause (Optional Time Between Events).

The timer can be programmed with up to five separate timers, easily activated by associated
keys, and each one with the above four parameters: Time of Action, Time of Pause, Number of
Cycles and Time of Final Pause.

Turning the Timer On and Off
Turn the timer on and off with the On-Off key. When turned off, one separation point between
the minutes and seconds will remain lighted up, indicating the presence of a live power feed.

Visualizations
If the time is less than 10:00, it will appear entirely on the right display, and the number of
cycles (rounds) will appear on the left display. Otherwise, the minutes are displayed on the left,
instead of the number of cycles (rounds).

Start and Stop of a Visualized Timer
To begin the count of one of the five timers, press the key of the desired timer (Timer-X),
followed by the Start-Stop key. When the key of this Timer-X is pressed twice, the starting time
is charged and visualized; the Start-Stop key must then be pressed to begin the count. The time
count can be stopped and then started again with the Start-Stop key.

Timer Booking
A timer can be booked in order to start a count automatically at the end of a timer that is
visualized. If the timer in use is programmed on an infinite cycle, the booked timer will begin at
the end of the first pause of the working timer. To make a booking, press the key of the Timer­x to be booked and then the Timer-Booking key.