®
INSTALLATION, OPERATION,
& MAINTENANCE MANUAL
MLJ-1000B
1,000 LB MINI JACK
FOLLOW THIS MANUAL CAREFULLY TO ENSURE THE MACHINE WILL
FUNCTION CORRECTLY AND PROVIDE MANY YEARS OF DEPENDABLE SERVICE.
FAILURE TO FOLLOW THESE INSTRUCTIONS AND SAFETY WARNINGS MAY
RESULT IN PERSONAL INJURY OR PROPERTY DAMAGE. USE OF STRAPS IS
RECOMMENDED - SOLD SEPARATELY. KEEP THIS MANUAL IN A SAFE DRY
PLACE FOR FUTURE REFERENCE.
To Our Valued Customers:
Thank you for purchasing a Titan Lifts® product. We hope this high quality equipment provides you
with years of dependable service.
It is unfortunate that rare situations may occur with the products you purchase from Titan Lifts®.
We value your business as well as the trust you have and need to maintain your relationship with
us. Titan Lifts® carries liability coverage that may protect our customers if a situation does occur.
However, as in all accidents there must be proof of liability for a claim to be made. Our insurance
company requires the following procedures be observed in order to consider a claim:
A. The claimant must contact the Titan Lifts® distributor immediately with the facts of the
situation.
B. If any equipment is damaged, including vehicles or shop equipment, Titan Lifts® must
be given the
opportunity to send and impartial representative to the site for proper assessment of the situation.
C. The Vehicle cannot be moved until either an impartial representative has reviewed
the accident or clear and precise pictures are taken that reect all the pertinent information for an
impartial representative to be able to access the information from a distance. Titan Lifts® or its
representatives must approve the pictures before anything can be moved.
D. If any potential liability is determined on behalf of Titan Lifts®, two estimates must be
submitted for damages to be reimbursed.
It is imperative that the claimant complies with these procedures, because without proper assessment of the situation a claim will be denied.
ARBITRATION NOTICE
The installation or use of this equipment shall constitute an acknowledgement that the user agrees
to resolve any and all disputes or claims of any kind whatsoever, which relate in any way to the
equipment, by way of binding arbitration, not litigation. No suit or legal action may be led in any
state or federal court. Any arbitration shall be governed by the Federal Arbitration Act, and administered by the American Mediation Association, Indianapolis Indiana. The maximum amount that
an arbitrator may award and all damages shall not exceed the retail value of this equipment.
WARRANTY NOTICE
This equipment must be installed be a “Professional Installer” assembled and used in the manner
according to the documentation provided to be covered by warranty.
Damaged or missing components must be reported within 72 hours of receipt to your freight carrier
and to the distributor. Claims must be led to cover cost.
If you have any questions or if we can be of any further assistance, please don’t hesitate to contact
a Titan Lifts® representative at 1-888-908-4826. Thank you for the opportunity to continue to serve
your lift equipment needs.
®
PO Box 7069 Greenwood, IN 46142
1.888.908-4826 FAX (317) 215.2770
www.titanlifts.com
TITAN MARKETING, LLC
INSTRUCTIONS
OPERATION & MAINTENANCE
SAFETY PRECAUTIONS
WARNING: READ ENTIRE MANUAL AND COMPLY WITH ALL SAFETY AND SERVICE
PRECAUTIONS. DEATH, PERSONAL INJURY AND/OR PROPERTY DAMAGE MAY OCCUR IF
INSTRUCTIONS ARE NOT FOLLOWED CAREFULLY.
UNPACKING AND SET-UP
1. Carefully unpack the lift making sure that all of the parts have been included.
2. Make sure to use the lift on a clean, smooth solid surface.
3. Place the lift saddles rmly positioned on the frame, solid surface, or manufacturers recommended
lifting points prior to lifting.
1. All moving parts have been lubricated at the factory and should be re-lubricated before the rst use
and at least once every six months to prevent damage.
2. Do not use this product if worn or damaged. Examine lift for structural cracks, bends, or other signs of
damage prior to each use to ensure safe proper working condition.
3. Keep the lift clean, dry, and well maintained to extend longevity of the product.
4. When not in use, the lift must be stored in the lowest position, in a dry location.
5. Use this as a secondary lift with a balanced load that is rmly positioned and secured at all times.
1. Load should not exceed rated capacity for this lift – 1100lbs (500 kg)
2. Only trained people should operate the lift.
3. Indoor use recommended.
4. Do not move the lift while loaded.
5. Keep hands, tools, and other extremities from any moving parts.
6. Maintain a safe working environment. The work area should be clean, dry, clutter free, and sufciently
lit.
7. Wear proper safety attire. Do not wear loose tting clothing while operating lift, long hair and sleeves
should be secured.
8. Keep children and bystanders away from work area. Do not let children operate or play on lift.
9. Do not use if under the inuence of drugs or alcohol. Operator must be alert at all times when using
heavy lift equipment.
10. Never operate the lift with someone on it.
11. Use this lift only for the work it is intended. Do not use this product for an application for which it was
not designated. Misuse can lead to personal injury and/or property damage.
12. Install safety bar (24) in appropriate hole to prevent lift from lowering. Lower the lift against the safety
bar prior to performing work.
13. DO NOT USE AN IMPACT DRIVER TO OPERATE THE LIFT!
WARNING
The warnings, precautions and instructions in this manual cannot
cover all possible conditions and situations that may occur. The
operator must understand that the operator must supply common
sense and examine caution factors when using this product to
determine safety in all circumstances being used.
Copyright © 2010 by Titan Marketing, LLC. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express consent of Titan
Marketing, LLC. Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein. Tools required for
assembly and service may not be included.
®
PO Box 7069 Greenwood, IN 46142
1.888.908-4826 FAX (317) 215.2770
www.titanlifts.com
TITAN MARKETING, LLC
NO. DESCRIPTION QTY NO DESCRIPTION QTY
1 INSIDE LIFTING ARM 1 13 BOLT M8X12 4
2 OUTSIDE LIFTING ARM 1 14 BASE PLATE 1
3 INSIDE FIXING SPRING 1 15 PLATFORM 1
4 OUTSIDE REMEVABLE SPINDLE 1 16 BOLT 2
5 OUTSIDE FIXING SPINDLE 1 17 ADJUSTABLE PLATE 2
6 INSIDE REMOVABLE SPINDLE 1 18 SADDLE 2
7 INSIDE FRAME ROLLER 2 19 HANDLE 1
8 OUTSIDE FRAME ROLLER 2 20 CENNECT PIN 1
9 LIFTING SCREW 1 21 WASHER M6 2
10 BEARING 1 22 BOLT M6 2
11 FIXING NUT 1 23 WASHER M6 2
12 LOCK NUT M6 1 24 SAFETY BAR 1
Revision 1
Loading...