Titan Controls Helios 16, Helios 14, Helios 13, Helios 17 Instruction Manual
Helios® 16
16 Light - 240 Volt Controller
Instruction Manual
www.titancontrols.net
www.titancontrols.net
Notes:
_________________________________________________
_________________________________________________
_________________________________________________
_________________________________________________
_________________________________________________
_________________________________________________
________________________________________________
1 Square = ____ Foot/Feet
®
VANCOUVER, WASHINGTON U.S.A.
VANCOUVER, WASHINGTON U.S.A.
Revision E – 12/13/2012 © Titan Controls
®
Helios® 16
• Warnings & Cautions
• Helios® 16– Lighting Controller Overview
• Instructions for Operation
• Troubleshooting Tips
• Controller Specications
• Installation Examples
• Warranty Information
• Service and Repair Program
Warnings & Cautions
• The Helios® 16 must be installed by a licensed/certied electrician or you will void your
warranty!
• Read all instructions before operating controller.
• This controller is designed for use with MAGNETIC OR ELECTRONIC BALLASTS.
• Do not put your controller in an area where it can get wet or sprayed.
• When using “bug bombs” in area, cover controller completely to avoid corrosion.
• Do not put paperclips, tools, etc. into unit. Possible electrocution may occur.
• Make sure to verify the voltage, amperage and hertz of the power source prior to wiring the
controller into power source.
• Check that all ballasts that will be activated by this controller are the proper voltage.
• This controller is designed for ‘Inside Use’ only.
• Avoid placing the controller near heat generating sources.
• Use caution when operating controller in extremely humid environments.
• Do not use controller for purposes other than the unit was designed to function.
• Use controller within dened environmental specications.
• Ask your Dealer for tips and techniques regarding the use of this controller.
• Be conscientious when disposing of any products.
• Enjoy your Titan Controls® lighting controller for years to come!
Helios® 16 –240 Volt / 16 Light
Controller Overview
The Helios® 16 lighting controller is specically designed for operation of high intensity
discharge (HID) lighting systems. The controller will run your lights for any timing pattern over
a 24 hour period by plugging the relay ‘trigger cord sets’ into external appliance timers. There
is a 30 second delay between each bank of eight (8) 1000 watt lights. This allows each 8000
WARRANTY SERVICE: Please read warranty information first
If after reviewing the troubleshooting tips the unit will still not work, you should return it to the
Dealer where you purchased the controller. They will be able to further evaluate the unit and test
its various components and quite possibly will be able to identify and/or x any problems. If the
Dealer is unable to x the unit, they will return it to us for factory repair.
If there are no Dealers in your area, you may contact us directly for technical support. If
we cannot help you resolve the problem over the phone, we will issue you a RMA # (return
merchandise authorization) authorizing you to return the unit to us for factory reconditioning
(if the unit is under warranty). Contact the number below for a RMA and shipping address.
Complete the form below and include it with your unit. Also please write the RMA # on the
outside of the box.
Please package the unit in its original packaging. If it is damaged in shipment we cannot be
responsible.
Once we receive the unit back, we will repair the controller within 48 hours (business) and return
it to you freight prepaid via UPS ground shipment.
Include the following if returning directly to Titan Controls®
• Proof of purchase • This completed form • RMA # on the outside of the box
Return Merchandise Authorization Number (Required)
Com pan y Na me: ____________________________________________________________________________________
Con tac t Na me: _____________________________________________________________________________________
Add ress : __________________________________________________________________________________________
____________________________________________________________________________________________________
Pho ne # : ___________________________________________________________________________________________
Email address: _______________________________________________________________________________
What is the nature of the problem?
_________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
Shipping address will be given when the RMA # is issued.
www.titancontrols.net
For technical assistance call us at 1-888-80-Titan or 1-888-808-4826.
®
Loading...